1 / 53

Ch 17: Additional Aspects of Aqueous Equilibria

Ch 17: Additional Aspects of Aqueous Equilibria. Brown, LeMay Ch 17 AP Chemistry Monta Vista High School. 17.1: Common Ion Effect. Addition of a “common ion”: solubility of solids decrease because of Le Châtelier’s principle. Ex: AgCl (s) ↔ Ag + (aq) + Cl - (aq)

samson
Télécharger la présentation

Ch 17: Additional Aspects of Aqueous Equilibria

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Ch 17: Additional Aspects of Aqueous Equilibria Brown, LeMay Ch 17 AP Chemistry Monta Vista High School

  2. 17.1: Common Ion Effect • Addition of a “common ion”: solubility of solids decrease because of Le Châtelier’s principle. Ex: AgCl (s) ↔ Ag+ (aq) + Cl- (aq) • Addition of Cl- shifts equilibrium toward solid

  3. 17.4: Solubility Equilibria • Dissolving & precipitating of salts • Solubility rules discussed earlier are generalized qualitative observations of quantitative experiments. Ex: PbCl2 (s) ↔ Pb2+ (aq) + 2 Cl- (aq) Ksp = [Pb2+][Cl-]2 = 1.6 x 10-5 Ksp = solubility-product constant(found in App. D) • Recall that both aqueous ions and solid must be present in solution to achieve equilibrium • Changes in pH will affect the solubility of salts composed of a weak acid or weak base ion.

  4. Molar solubility:moles of salt per liter of solution in a saturated solution Ex: What is the molar solubility of Ag2SO4 at 25ºC? What mass of Ag2SO4 does that represent per liter? Ksp (Ag2SO4) = 1.4 x 10-5; MW Ag2SO4 = 311.80 g Ag2SO4 (s) ↔ 2 Ag+ (aq) + SO4-2 (aq) Ksp = [Ag+]2[SO4-2] (-x) + 2x M + x M X 2x M x M Ksp = [Ag+]2[SO4-2] = (2x)2(x) = 4x3 x = (1.4 x 10-5/4)1/3 = 0.015 M = [Ag2SO4] = [SO42-]

  5. Ex: What mass of Ag2SO4 does that represent per L? (MW Ag2SO4 = 311.80 g, molar solubility, [Ag2SO4] = 0.015 M) 4.7 g Ag2SO4

  6. Ex: 3.0 x 10-5 g Pb3(AsO4)2 will dissolve in 1.0 L water to make a saturated solution. What is Ksp of Pb3(AsO4)2? (MW of Pb3(AsO4)2 = 899.44 g/mol) Pb3(AsO4)2 (s) ↔ 3 Pb+2 (aq) + 2 AsO4-3 (aq) Ksp = [Pb2+]3[AsO4-3]2 [Pb3(AsO4)2]= (3.0 x 10-5 g)/(899.44 g/mol)/(1.0 L) = 3.3 x 10-8 M Pb3(AsO4)2 = x (-x) + 3x M + 2x M X 3x M 2x M Ksp=[Pb2+]3[AsO4-3]2 = [3(3.3 x 10-8)]3 [2(3.3 x 10-8)]2 = = 4.5 x 10-36

  7. Ex: What is the molar solubility of CaF2 in a 1.0 L solution of 0.10 M Ca(NO3)2? Ksp (CaF2) = 3.9 x 10-11 CaF2 (s) ↔ Ca2+ (aq) + 2 F- (aq) (-x) + x M + 2x M X (0.10 + x) M 2x M Assume x is negligible: x = 9.9x10-6 moles of CaF2 are soluble per L.

  8. Predicting whether a precipitate (ppt) will form depends on concentration of ions present and Ksp of all likely salts. • Compare the ion-product, Q, with Ksp • Q has the same mathematical form as Ksp • Q must be calculated for each example If: Q > Ksp precipitation occurs (continues until Q = Ksp) Q = Ksp solution is at equilibrium Q < Ksp solid dissolves (continues until Q = Ksp)

  9. Ex: Will a precipitate form when 0.10 L of 3.0 x 10-3 M Pb(NO3)2 is added to 0.400 L of 5.0 x 10-3 M Na2SO4? Possible new salts: PbSO4 (Ksp = 1.6 x 10-8) NaNO3 (Ksp = 112.12) Q = [Pb2+][SO42-] [Pb2+] = (3.0 x 10-3 M)(0.10 L) / (0.10 L + 0.400 L) = 3.0 x 10-4 mol / 0.50 L = 6.0 x 10-4 M Pb2+ [SO42-] = (5.0 x 10-3 M)(0.400 L) / (0.10 L + 0.400 L) = 2.0 x 10-3 mol / 0.50 L = 4.0 x 10-3 M SO42- Q = [Pb2+][SO42-] = (6.0x10-4)(4.0x10-3) = 2.4 x 10-6 • Since Q > Ksp, PbSO4 will precipitate.

  10. Ex: Will a precipitate form if 20.0 mL of 3.50 x 10-3 M Hg2(NO3)2 solution are mixed with 40.0 mL of 2.00 x 10-3 M NaCl solution? Ksp (Hg2Cl2) = 1.3 x 10-18 [Hg22+] = (3.50x10-3 M)(0.0200 L)/(0.0200 L + 0.0400 L) = 0.00117 M [Cl-] = (2.00 x 10-3 M)(0.0400 L)/(0.0200 L + 0.0400 L) = 0.00133 M Q = [Hg22+][Cl-]2 Q = (.00117)(.00133)2 = 2.07 x 10-9 • Since Q > Ksp, there will be a precipitate (Hg2Cl2)

  11. 17.2: Buffers: • Solutions that resist drastic changes in pH upon additions of small amounts of acid or base. • Consist of a weak acid and its conjugate base (usually in salt form) Ex: acetic acid and sodium acetate: HC2H3O2 + NaC2H3O2 • Or consist of a weak base and its conjugate acid (usually in salt form) Ex: ammonia and ammonium chloride: NH3 + NH4Cl

  12. Consider a weak acid/salt buffer: HA (aq) ↔ H+ (aq) + A- (aq) • Thus, the pH of a buffer is determined by Ka of weak acid and the ratio of the concentrations of an acid & its conjugate base.

  13. Henderson-Hasselbalch equation: Karl Hasselbalch(1874-1962) Lawrence Henderson(1878-1942) Use for all buffer solutions!

  14. Why/how do buffers work? • A small addition of [H+] will decrease the [A-] but increase the [HA]: H+ (aq) + A- (aq) ↔ HA (aq) pH decreases, but D pH will be small • A small addition of [OH-] will decrease the [HA] but increase the [A-]: • OH- (aq) + HA (aq) ↔ H2O(l) + A- (aq) pH increases, but D pH will be small

  15. In general, when choosing a buffer, select one in which the acid form has a pKa close to the desired pH. • If [base] > [acid], then pH > pKa • If [base] < [acid], then pH < pKa • If [base] = [acid], then pH = pKa and [H+] = Ka

  16. Buffer capacity: • Amount of acid or base a buffer can neutralize before the pH begins to change “significantly”. • The greater the concentrations of acid & base in the buffer, the greater the buffer capacity. • A “typical” buffer solution can hold the pH to ± 1.00 • Buffer solutions can also be considered common-ion solutions.

  17. Ex: Calculate the pH of a buffer made by adding 0.300 mol acetic acid and 0.300 mol sodium acetate to enough water to make 1.00 L. (Ka = 1.8 x 10-5) CH3COOH (aq) ↔ CH3COO- (aq) + H+ (aq) -x M + x M + x M x M (0.300 – x) M (0.300 + x) M

  18. Or, use Henderson-Hasselbalch: • Assumes that x is negligible

  19. Ex: Calculate the pH of this buffer after the addition of 0.020 mol NaOH (assume volume remains constant.) • Neutralization: calculate the concentrations after the initial reaction of the strong base with the weak acid part of the buffer. CH3COOH (aq) + OH- (aq) → CH3COO- (aq) + H2O(l) -0.020 mol - 0.020 mol + 0.020 mol 0.280 mol 0.320 mol 0 mol Then, consider how these amounts behave in equilibrium!

  20. Equilibrium: CH3COOH (aq) ↔ CH3COO- (aq) + H+ (aq) -x mol + x mol + x mol (0.280 – x) mol x mol (0.320 + x) mol

  21. Or, use Henderson-Hasselbalch: The pH increased, but not by much.

  22. Ex: Calculate the pH of the original buffer after the addition of 0.020 mol HCl (assume volume remains constant.) • Neutralization: calculate the concentrations after the initial reaction of the strong acid with the weak conjugate base. CH3COO- (aq) + H+ (aq) → CH3COOH (aq) -0.020 mol - 0.020 mol + 0.020 mol 0.280 mol 0.320 mol 0 mol Then, consider how these amounts behave in equilibrium!

  23. Equilibrium: CH3COOH (aq) ↔ CH3COO- (aq) + H+ (aq) -x mol + x mol + x mol (0.320 – x) mol x mol (0.280 + x) mol

  24. Or, use Henderson-Hasselbalch: The pH decreased, but not by much.

  25. 17.3: Acid-Base Titrations Titration curve: graph of pH vs. volume of titrant added • Each type of titration has a uniquely shaped titration curve Every titration consists of four regions: • The initial pH • Between the initial pH and the equivalence point: pH is determined by amount of solution not yet neutralized • The equivalence point: moles of acid = moles of base, leaving a solution of the salt produced in the acid-base neutralization • After the equivalence point: pH is determined by amount of excess titrant

  26. Strong Acid – Strong Base Titration Ex: 0.100 M NaOH added to 50.0 mL of 0.100 M HCl HCl (aq) + NaOH (aq) → NaCl (aq) + H2O (l) 14 pH 7 0 0 50 Volume of NaOH added (mL) • Region 1: Initial pH • pH starts very low (here, pH = -log 0.100 = 1) because a strong acid is being titrated.

  27. 14 pH 7 0 Ex: 0.100 M NaOH added to 50.0 mL of 0.100 M HCl 0 50 Volume of NaOH added (mL) • Region 2: Between initial pH and equivalence point • As base is added, pH increases slowly, then rapidly as it approaches the equivalence point. • Before equivalence point, moles acid > moles base added; pH is determined by amount of solution not yet neutralized

  28. 14 pH 7 0 Ex: 0.100 M NaOH added to 50.0 mL of 0.100 M HCl moles H+ from HCl = moles OH- added 0 50 Volume of NaOH added (mL) • Region 3: Equivalence point • Reached when moles H+ = moles OH- added; here, at pH = 7 because only species present are H2O and the salt (Na+1 and Cl-1), which do not hydrolyze to produce an acidic or basic solution, and at V = 50 mL because MAVA= MBVB = (0.100)(.0500) = (0.100)VB • Endpoint: point at which an indicator changes color; an approximation of the actual equivalence point

  29. 14 pH 7 0 Ex: 0.100 M NaOH added to 50.0 mL of 0.100 M HCl 0 50 Volume of NaOH added (mL) • Region 4: After equivalence point • As base is added, pH rises rapidly, then continues to increase slowly. • Moles acid < moles base added • pH eventually approaches an upper limit as base is added; here at pH = 13 (-log [OH-] = 1).

  30. pH Indicators: • Chemicals with acid and base forms with significant color differences • For a titration, choose an indicator with a range near the equivalence point Phenolphthalein: colorless (HPh: acid form above) to pink (Ph-, base form) at pH ≈ 8.5-9.5 * Methyl red: red (HMer, acid form) to yellow (Mer-, base form) at pH ≈ 4.2 – 6.3

  31. pH Indicators and Titrations • Phenophthalein is often used as an indicator in the titration of a strong acid with a strong base since it turns pink around pH 9, only a small addition of titrant beyond the equivalence point at pH 7.

  32. Weak Acid – Strong Base Ex: 0.100 M NaOH (aq) is added to 50.0 mL of 0.100 M CH3COOH (aq) Equivalence point: MAVA = MB VB (0.100 M)(0.0500 L) = (0.100 M)(VB) VB = 0.0500 L NaOH Equation 1: Neutralization: reaction goes to completion CH3COOH (aq) + OH-(aq) → H2O (l) + CH3COO-(aq) Equation 2: Equilibrium: extent of reaction based on Ka CH3COOH (aq) ↔ H+ (aq) + CH3COO- (aq)

  33. Ex: 0.100 M NaOH is added to 50.0 mL of 0.100 M CH3COOH 14 pH 7 0 Region 1: Initial pH • pH starts below pH 7 because a weak acid is being titrated. 0 50 Volume of NaOH added (mL)

  34. Ex: 0.100 M NaOH is added to 50.0 mL of 0.100 M CH3COOH 14 pH 7 0 Region 2: Between initial pH and equivalence point • Moles acid > moles base added • pH is determined by considering extent of neutralization and equilibrium reactions. 0 50 Volume of NaOH added (mL)

  35. Ex: 0.100 M NaOH is added to 50.0 mL of 0.100 M CH3COOH 14 pH 7 0 Region 3: Equivalence point • Equivalence point at pH > 7 because only species present are H2O and the salt (Na+ and CH3COO-); acetate ion is a weak base and hydrolyzes to produce a basic solution. moles H+ from CH3COOH = moles OH- added 0 50 Volume of NaOH added (mL)

  36. Ex: 0.100 M NaOH is added to 50.0 mL of 0.100 M CH3COOH 14 pH 7 0 Region 4: After equivalence point • Moles acid < moles base added • pH is determined by concentration of excess base in solution (as in strong acid/strong base); equilibrium can be ignored 0 50 Volume of NaOH added (mL)

  37. Ex: 0.100 M NaOH is added to 50.0 mL of 0.100 M CH3COOH; calculate pH at regular intervals of titration (Ka = 1.8 x 10-5): (similar to Exercise 17.7, p. 637) After 30.0 mL of 0.100 M NaOH has been added: mol OH- = (0.100 M)(0.0300 L) = 3.00 x 10-3 mol OH- mol CH3COOH = (0.100 M)(0.0500 L) = 5.00 x 10-3mol - 3.00 x 10-3 mol - 3.00 x 10-3 mol + 3.00 x 10-3 mol 2.00 x 10-3 mol 3.00 x 10-3 mol 0 [CH3COOH] = (2.00 x 10-3 mol)/(0.0800 L) = 0.0250 M [CH3COO-] = (3.00 x 10-3 mol)/(0.0800 L) = 0.0375 M

  38. After 30.0 mL of 0.100 M NaOH has been added: - x + x + x 0.0250 - x + x 0.0375 + x Or use H-H since its a buffer solution:

  39. After 50.0 mL of 0.100 M NaOH has been added: • Initial: mol OH- = (0.100 M)(0.0500 L) = 5.00 x 10-3 mol OH- mol CH3COOH = (0.100 M)(0.0500 L) = 5.00 x 10-3mol - 5.00 x 10-3 mol - 5.00 x 10-3 mol + 5.00 x 10-3 mol 0 5.00 x 10-3 mol 0 [CH3COO-] = (5.00 x 10-3 mol)/(0.100 L) = 0.0500 M

  40. After 50.0 mL of 0.100 M NaOH has been added: - x + x + x 0.0500 - x x + x

  41. After 70.0 mL of 0.100 M NaOH is added: mol OH- = (0.100 M)(0.0700 L) = 7.00 x 10-3 mol OH- mol CH3COOH = (0.100 M)(0.0500 L) = 5.00 x 10-3 mol mol OH- in excess = (7.00 x 10-3 – 5.00 x 10-3) = 2.00 x 10-3 mol OH- [OH-] = (2.00 x 10-3 mol)/(0.1200 L) = 0.0167 M OH- pOH = 1.778 and pH = 12.22 (pH + pOH = 14.00)

  42. Weak Base – Strong Acid Ex: 0.100 M HCl (aq) is added to 40.0 mL of 0.0750 M NH3 (aq) Equivalence point: MAVA = MB VB (0.100 M)(VA) = (0.0750 M)(0.0400 L) VA = 0.0300 L HCl Equation 1: Neutralization: reaction goes to completion NH3 (aq) + H+ (aq) → NH4+ (aq) Equation 2: Equilibrium: extent of reaction based on Kb NH3 (aq) + H2O (l) ↔ OH- (aq) + NH4+ (aq)

  43. Ex: 0.100 M HCl is added to 40.0 mL of 0.0750 M NH3 (aq) 14 pH 7 0 Region 1: Initial pH • pH starts above pH 7 because a weak base is being titrated. 0 30 Volume of HCl added (mL)

  44. Ex: 0.100 M HCl is added to 40.0 mL of 0.0750 M NH3 (aq) 14 pH 7 0 Region 2: Between initial pH and equivalence point • Moles base > moles acid added • pH is determined by considering extent of neutralization and equilibrium reactions. 0 30 Volume of HCl added (mL)

  45. Ex: 0.100 M HCl is added to 40.0 mL of 0.0750 M NH3 (aq) 14 pH 7 0 Region 3: Equivalence point • Equivalence point at pH < 7 because only species present are H2O and the salt (NH4+ and Cl-); ammonium ion is a weak acid and hydrolyzes to produce an acidic solution. moles NH3= moles H+ added 0 30 Volume of HCl added (mL)

  46. Ex: 0.100 M HCl is added to 40.0 mL of 0.0750 M NH3 (aq) 14 pH 7 0 Region 4: After equivalence point • Moles base < moles acid added • pH is determined by concentration of excess acid in solution (as in strong acid/strong base); equilibrium can be ignored 0 30 Volume of HCl added (mL)

  47. Ex: 0.100 M HCl is added to 40.0 mL of 0.0750 M NH3 (aq); calculate pH at regular intervals of titration. (Kb = 1.8 x 10-5) After 15.0 mL of 0.100 M HCl has been added: mol H+ = (0.100 M)(0.0150 L) = 1.50 x 10-3 mol H+ mol NH3 (aq) = (0.0750 M)(0.0400 L) = 3.00 x 10-3mol - 1.50 x 10-3 mol - 1.50 x 10-3 mol + 1.50 x 10-3 mol 1.50 x 10-3 mol 1.50 x 10-3 mol 0 [NH3] = (1.50 x 10-3 mol)/(0.0550 L) = 0.0273 M [NH4+] = (1.50 x 10-3 mol)/(0.0550 L) = 0.0273 M

  48. After 15.0 mL of 0.100 M HCl has been added: - x + x + x 0.0273 - x + x 0.0273 + x Or use H-H since its a buffer solution:

  49. After 30.0 mL of 0.100 M HCl has been added: • Initial: mol H+ = (0.100 M)(0.0300 L) = 3.00 x 10-3 mol H+ mol NH3 = (0.0750 M)(0.0400 L) = 3.00 x 10-3mol - 3.00 x 10-3 mol - 3.00 x 10-3 mol + 3.00 x 10-3 mol 0 3.00 x 10-3 mol 0 [NH4+] = (3.00 x 10-3 mol)/(0.0700 L) = 0.0429 M

  50. After 30.0 mL of 0.100 M HCl has been added: - x + x + x 0.0429- x x + x

More Related