1 / 40

Prepared by: Hiren Patel ( M.Pharm sem III )

Prepared by: Hiren Patel ( M.Pharm sem III ). APMCCPER, Himatnagar. Content. Introduction Pharmacokinetics of Ion Transfer Basic Circuit of Iontophoresis Movement of Ions In Solution Movement of Ions In Tissue Iontophoresis Techniques Selection of the Appropriate Ion

sancho
Télécharger la présentation

Prepared by: Hiren Patel ( M.Pharm sem III )

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Prepared by: Hiren Patel (M.PharmsemIII ) APMCCPER, Himatnagar

  2. Content • Introduction • Pharmacokinetics of Ion Transfer • Basic Circuit of Iontophoresis • Movement of Ions In Solution • Movement of Ions In Tissue • IontophoresisTechniques • Selection of the Appropriate Ion • Chemical Treatment Burns

  3. Iontophoresis • The transfer of ions across the skin (transdermal)by use of continuous direct current • It is a Painless, Sterile, Noninvasive Technique • Demonstrated To Have A Positive Effect On The Healing Process

  4. Pharmacokinetics of Ion Transfer • Transdermal iontophoresis delivers medication at a constant rate so that the effective plasma concentration remains within a therapeutic window for an extended period of time. • Iontophoresis appears to overcome the resistive properties of the skin to charged ions.

  5. Iontophoresis decreases absorption lag time while increasing delivery rate when compared with passive skin application • Iontophoresis provides both a spiked and sustained release of a drug reducing the possibility of developing a tolerance to drug

  6. Rate at which an ion may be delivered is determined by a number of factors • The concentration of the ion • The pH of the solution • Molecular size of the solute • Current density • Duration of the treatment

  7. Advantages of taking medication via transdermal iontophoresis relative to oral medications • Concentrated in a specific area • Does not have to be absorbed within the GI tract • Safer than administering a drug through injection

  8. Basic Circuit of Iontophoresis

  9. Movement of Ions In Solution • Ionization- Soluable compounds dissolve into ions suspended in solutions that are called electrolytes • Electrophoresis- Movement of ions in solution according to the electrically charged currents acting on them.

  10. Cathode = Negatively charged electrode • Highest concentration of electrons • Repels negatively charged ions • Attracts positively charged ions • Accumulation of negatively charged ions in a small area creates an acidic reaction

  11. Anode = Positively charged electrode • Lower concentration of electrons • Repels positively charged ions • Attracts negatively charged ions • Accumulation of positively charged ions in a small area creates an alkaline reaction

  12. Positively charged ions are driven into tissues from positive pole • Negatively charged ions are driven into tissues from negative pole • Knowing correct ion polarity is essential

  13. Movement of Ions In Tissue • Force which acts to move ions through the tissues is determined by • Strength of the electrical field • Electrical impedance of tissues to current flow

  14. Strength of the electrical field is determined by the current density • Difference in current density between the active and inactive electrodes establishes a gradient of potential difference which produces ion migration within the electrical field • Active electrode- the one being used to drive the ion into the tissue

  15. Current density may be altered by • Increasing or decreasing current intensity • Changing the size of the electrode • Increasing the size of the electrode will decrease current density under that electrode.

  16. Current density should be reduced at the cathode (negative electrode) • Alkaline reaction (+ions) is more likely to produce tissue damage than acidic reaction(- ions) • Thus negative electrode should be larger (2x) to reduce current density.

  17. Higher current intensities necessary to create ion movement in areas where skin and fat layers are thick further increasing chance of burns around negative electrode • Sweat ducts are primary paths by which ions move through the skin and act to decrease impedance facilitating the flow of direct current as well as ions

  18. The quantity of ions transferred into the tissues through iontophoresis is directly proportional to • Current density at the active electrode • Duration of the current flow • Concentration of ions in solution

  19. Once the ions pass through skin they recombine with existing ions and free radicals in the blood thus forming the necessary new compounds for favorable therapeutic interactions

  20. Iontophoresis Techniques

  21. Iontophoresis Generators • Produce continuous direct current • Assures unidirectional flow of ions

  22. Intensity control 1 to 5 mA Constant voltage output that adjusts to normal variations in tissue impedance thus reducing the likelihood of burns Automatic shutdown if skin impedance reduces to preset limit

  23. Adjustable Timer Up to 25 min

  24. Lead wires Active electrode Inactive electrode

  25. Current Intensity • Low amperage currents appear to be more effective as a driving force than currents with higher intensities • Higher intensity currents tend to reduce effective penetration into the tissues • Recommended current amplitudes used for iontophoresis range between 3-5 mA

  26. Increase intensity slowly until patient reports tingling or prickly sensation • If pain or a burning sensation occur intensity is too great and should be decreased • When terminating treatment intensity should be slowly decreased to zero before electrodes are disconnected

  27. Maximum current intensity should be determined by size of the active electrode • Current amplitude usually set so that current density falls between 0.1-0.5 mA/cm2 of the active electrode surface

  28. Treatment Duration • Treatment duration ranges between 10-20 minutes with 15 minutes being an average • Patient should be comfortable with no reported or visible signs of pain or burning • Check skin every 3-5 minutes looking for signs of skin irritation • Decrease intensity during treatment to accommodate decrease in skin impedance to avoid pain or burning

  29. Traditional Electrodes • Older electrodes made of tin, copper, lead, aluminum, or platinum backed by rubber • Completely covered by a sponge, towel, or gauze which contacts skin • Absorbent material is soaked with ionized solution • Ion ointment should be rubbed into the skin and covered by some absorbent material.

  30. Commercial Electrodes • Sold with most iontophoresis systems • Electrodes have a small chamber covered by a semipermiable membrane into which ionized solution may be injected • The electrode self adheres to the skin

  31. Electrode Preparation • To ensure maximum contact of electrodes skin should be shaved and cleaned prior to attachment of the electrodes • Do not excessively abrade skin during cleaning since damaged skin has lowered resistance to current and a burn might occur more easily

  32. Attach self-adhering active electrode to skin

  33. Attach self-adhering active electrode to skin Inject ionized solution into the chamber

  34. Attach self-adhering active electrode to skin Inject ionized solution into the chamber Attach self-adhering inactive electrode to the skin and attach lead wires from generator to each

  35. Electrode Placement Size and shape of electrodes can cause variation in current density (smaller = higher density) Electrodes should be separated by at least the diameter of active electrode Wider separation minimizes superficial current density decreasing chance for burns

  36. Selecting the Appropriate Ion • Negative ions accumulating at the positive pole or anode • Produce an acidic reaction through the formation of hydrochloric acid • Produce softening of the tissues by decreasing protein density-useful in treating scars or adhesions • Some negative ions can also produce an analgesic effect (salicylates)

  37. Positive ions that accumulate at the negative pole • Produce an alkaline reaction with the formation of sodium hydroxide • Produce hardening of the tissues by increasing protein density

  38. Selecting the Appropriate Ion • Inflammation • Dexamethasone (-) • Hydrocortisone (-) • Salicylate (-) • Spasm • Calcium (+) • Magnesium(+) • Analgesia • Lidocaine (+) • Magnesium (+) • Edema • Hyaluronidase(+) • Salicylate (-) • Mecholyl(+) • Open Skin Lesions • Zinc(+) • Scar Tissue • Chlorine(-) • Iodine(-) • Salicylate(-)

  39. Chemical Treatment Burns • Most common problem is a chemical burn which occurs as a result of direct current itself and not because of the ion being used • Continuous direct current creates migration of ions which alters the normal pH of the skin • Chemical burns typically result from accumulation of sodium hydroxide at cathode • Alkaline reaction causes sclerolysis of local tissues • Decreasing current density by increasing size of cathode can minimize potential for chemical burn

More Related