1 / 24

Detailed simulations of a full-body RPC-PET scanner

Detailed simulations of a full-body RPC-PET scanner. M. Couceiro 1,2 , P. Crespo 1 , R. Ferreira Marques 1,3 , P. Fonte 1,2. 1 LIP, Laboratório de Instrumentação e Física Experimental de Partículas, Coimbra, Portugal 2 ISEC, Instituto Superior de Engenharia de Coimbra, Coimbra, Portugal

sandraberry
Télécharger la présentation

Detailed simulations of a full-body RPC-PET scanner

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Detailed simulations of a full-bodyRPC-PET scanner M. Couceiro1,2, P. Crespo1, R. Ferreira Marques1,3, P. Fonte1,2 1 LIP, Laboratório de Instrumentação e Física Experimental de Partículas, Coimbra, Portugal 2 ISEC, Instituto Superior de Engenharia de Coimbra, Coimbra, Portugal 3 Departamento de Física da Universidade de Coimbra, Coimbra, Portugal

  2. Introduction to PET Brief PET overview • PET isa medical imaging technique,aimed to study functional processes • An appropriatemolecule, labelled with a positron emitter radioisotope, is injected in the patient • When a decay occurs,a positron is emitted, which loses energy in several collisions, combining then with an electron from the medium • Since the positron is the electron antimatter,an annihilation occurs, resulting in two 511 keV photons emitted in opposite directions • Annihilation photons, detected in an appropriate time window(4 to 12 ns), are recorded,defining a Line Of Response (LOR) • Image is reconstructed from the acquired LOR

  3. Introduction to PET Brief PET overview • Three types of coincidence events can occur • True coincidences: photons from a single decay leave the patient without suffering interactions • Scattered coincidences: one or both photons from a single decay interact in the patient, losing energy, and changing their initial direction • Random coincidences: photons from different decays detected in coincidence True Scattered Random False lines of response  must be rejected

  4. Introduction to PET Brief PET overview • State of the art PET scanners • Scintillation crystal detectors with high efficiency for 511 keV photons and good energy resolution for scatter rejection • Reduced Axial Field Of View • Several bed positions to obtain a full body image • Increased injected activity • Discontinuous uptake signal • Full body PET scanner • Full Axial Field Of View • Single bed position to obtain a full body image • Reduced injected activity • Continuous uptake signal • Too expensive with crystal detectors • RPC may be a suitable detector for full body PET scanners [D.B.Crosetto, 2000]

  5. XY readout plane RC passive network Y-strips RC passive network X-strips e- e- .......... Stacked RPCs Resistive Plate Chamber Basics HV Time signal Sensitive Area (precise small Gas Gap ~300 µm) Resistive Cathode e- E Resistive Anode At least one resistive electrode [A. Blanco et al., 2003] Photon • For 511 keV photons, and commonly used materials • Good timing resolution of 300 ps FWHM for photon pairs • No energy resolution • < 0.4% efficiency per gap for singles

  6. Scanner Geometry Transaxial Section of a Scanner Detection Wall 1008 mm 143.6 mm 2408 mm Top Y Electrode 1151.6 mm 0.20 mm Borosilicate Glass Top Glass Stack X Electrode RPC Detector Bottom Glass Stack 0.35 mm Nylon Spacers Bottom Y Electrode RPC-PET Simulations –Scanner geometry

  7. Axial Direction Transaxial Direction RPC-PET Data processing –Dead time processing • Each detector, has 10 independent transaxial readout sections (total of 800 for the scanner) • Non-paralyzable dead time for time signals • Paralyzable dead time for position signals Fine axial position readout Time readout Coarse axial position readout Fine transaxial position readout [Patent pending]

  8. 0.2 s 0.2 s 3 RPC-PET Data processing –Dead time processing (readout section) Non-paralyzable dead time model applied to all simulation hits Readout generated time events (te1, xe1, ye1, ze1) (te2, xe2, ye2, ze2) Hits Time Event 1 1 2 2 3 Paralyzable dead time model applied to all valid time events Final Event 2+3 1 Time Event 2 Fine position (3.44 mm binning in the radial direction, and 2 mm binning in the transaxial and axial directions) 1 2 Both events can be rejected or accepted with a coarse position (3.44 mm binning in the radial direction, 3 cm binning in the transaxial direction and 1 cm  Gaussian blur in the axial direction) 3

  9. Single time window coincidence sorter Event • Multiple time window coincidence sorter 1 Single coincidence 2       3 Multiple coincidence 4 Event (1,2) (4,5) Single coincidences 5 1 2 (2,3,4) (3,4,5) Multiple coincidences 3 4 5 RPC-PET Data processing –Coincidence sorter  = 5 ns

  10. RPC-PET Results – Scatter fraction (NEMA 2001) Detector scatter is responsible for some long-range diffusion

  11. ? Best trigger ? RPC-PET Results –Time-Space patterns for coincidence

  12. Bore rejection Geometric TOF rejection + 300 ps plus Geometric rejection Time-Space rejection Geometric TOF rejection RPC-PET Results –Tested trigger strategies

  13. Single time window coincidence sorter Multiple time window coincidence sorter RPC-PET Results –Scatter fraction (NEMA 2001)

  14. 0.0 s dead time for position signal Geometric rejection Geometric TOF rejection RPC-PET Results –Count rates and NECR, with position pileup rejection (NEMA 2001)

  15. 0.5 s dead time for position signal Geometric rejection Geometric TOF rejection RPC-PET Results –Count rates and NECR, with position pileup rejection (NEMA 2001)

  16. 1.0 s dead time for position signal Geometric rejection Geometric TOF rejection RPC-PET Results –Count rates and NECR, with position pileup rejection (NEMA 2001)

  17. RPC-PET Results –Count rates and NECR, with position pileup rejection (NEMA 2001) 3.0 s dead time for position signal Geometric rejection Geometric TOF rejection

  18. RPC-PET Results –Count rates and NECR, with coarse position (NEMA 2001) Independent of dead time for position signal Geometric rejection Geometric TOF rejection

  19. RPC-PET Results – NECR for single coincidence pairs (NEMA 2001)

  20. RPC-PET Results – NECR for multiple coincidence pairs (NEMA 2001)

  21. RPC-PET Results – NECR for all possible coincidence pairs (NEMA 2001)

  22. RPC-PET Results –Spatial resolution (NEMA 2001) Only DOI DOI + 1.0 mm Binning DOI + 2.0 mm Binning [M.Couceiro et al, 2012] Mean = 0.8 mm Mean = 1.4 mm Mean = 2.1 mm

  23. Conclusions • Disadvantages in comparison to crystal based detectors • Much smaller detection efficiency (20% to 50%) • No energy resolution (although energy sensitivity) • Previous simulations suggested that RPC-PET will have a significant improvement in sensitivity over current technology • Current simulations suggest that RPC-PET has higher scatter fractions than those present in current crystal based PET scanners, which however do not compromise system performance, as measured by the NEMANU-2 2001 • However, it is still necessary to test the spatial resolution at high count rates, and image quality as stated in NEMA NU-2 2001 protocol to conclude if coarse position policy can effectively be used to further increase NECR

  24. Acknowledgments • Laboratory for Advanced Computation (LCA) of the University of Coimbra, Portugal, for a very generous gift of computing time (300,000 hours) • Miguel Oliveira, of the LIP computing center, for his prompt response and availability to solve computational problems, including storage ones

More Related