1 / 18

TrueSTEAM ™ Humidification Systems

TrueSTEAM ™ Humidification Systems. Module 7: Maintenance and Service. Module 7: Maintenance and Service. Maintenance Understanding cleaning cycles How to manually clean TrueSTEAM How to replace the water filter Service How to identify fault root causes How to fix faults.

sarahw
Télécharger la présentation

TrueSTEAM ™ Humidification Systems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TrueSTEAM™ Humidification Systems Module 7: Maintenance and Service

  2. Module 7: Maintenance and Service • Maintenance • Understanding cleaning cycles • How to manually clean TrueSTEAM • How to replace the water filter • Service • How to identify fault root causes • How to fix faults

  3. Cleaning Cycles • Designed to dilute the concentration of water hardness in the TrueSTEAM tank • Automatic cleaning cycles • Remove concentration of dissolved minerals still in the water, which slows the accumulation of solid mineral scale and sediment • Manual cleaning cycles • Remove concentration of dissolved minerals • Allows user to clean out solid mineral scale and sediment

  4. Manual Cleaning Step 1: Indication • PRES • S EMPTY blinks to indicate manual cleaning is required • Note, TrueSTEAM will still operate even when this light is blinking • Press and hold the EMPTY button until the CLEAN TANK light begins blinking • This indicates a flushing cycle has initiated • When CLEAN TANK is on solid • Flushing cycle is complete and tank is empty • The tank is now safe to remove

  5. Manual Cleaning Step 2: Tank Removal • Turn red handle counter-clockwise to “Unlock’ position • Release solenoid by pushing back on grip • Grip tank bottom • With other hand, press down cover handle release, and pull handle forward

  6. 1. 2. Manual Cleaning Step 3: Cleaning • Tank cleaning • Use tap water to flush loose sediment from tank • Apply cleaning agent (list below) to cloth or paper and scrub residual scale from tank walls • Screen is removable for cleaning • Tank is dishwasher safe • Recommended cleaning agents • CLR • Lime-Away • White Vinegar • Do not use hydrocarbon oil based • Element cleaning • Apply cleaning agent and let soak for 10 minutes • Carefully rub scale off with cloth or paper

  7. Manual Cleaning Step 4: Reconnect Tank • Ensure sensor compartment fill holes are clear of debris. • Ensure gasket is properly seated in chassis before reconnecting tank.

  8. 1. 2. 3. Manual Cleaning Step 4: Re-Engage Tank • Attach the tank by securing the latch. • Engage the white water valve to the tank’s black spool, then turn the manual shut-off valve to the “Lock” position and plug in the power cord. • Check that TrueSTEAM is still mounted level and is securely in place on the mounting bracket.

  9. Changing the Water Filter • Replace the inline filter at least per season: • Turn the water supply off at the saddle valve or T-fitting. • Press down filter collar ring and pull out ¼” water line from each side. • Insert the ¼” lines into new filter. Apply modest pull to ensure a tight fit. • Secure the new filter in place.

  10. Inspect Water Level Sensor CAUTION: Electrocution hazard. TrueSTEAM must be unplugged before removing the cover. • Remove T20 Torx screw, then slide cover out front. • Remove T30 Torx screw and lift hinge and remove sensor assembly for inspection. • - If excessive debris is present, replace sensor pack: • Replacement sensor part #50027998-001 • Also available bundled with water filter #50042822-001

  11. Final Maintenance Steps • Clear duct from ventilation holes and debris from drain tube. • After cleaning, initiate a humidity call and check that there are no water or steam leaks on TrueSTEAM or the water lines. • While on vacation, it is recommended you turn the humidity control to ‘off’. • TrueSTEAM will drain and remain empty after 48 hours without a humidity call.

  12. Service and Diagnostics

  13. Service Interface • Call Service Light on indicates a fault detected • Press and hold ‘Reset’ until Call Service light blinks • Refer to troubleshooting guide for fault details • Basic, categorized descriptions and quick-fix steps provided in following slides • Refer to installation guide’s troubleshooting section for more detail

  14. Faults Related to the Heating Element

  15. Faults Related to Water Delivery/Monitoring

  16. Faults Related to Circuitry/Wiring

  17. Support Materials • Detailed Training Materials on the TrueSTEAM User Interface Available! • Visit www.forwardthinking.honeywell.com • Enter literature form: • #69-2285: TrueSTEAM Installation Manual

  18. Module 7: Summary • Maintenance • Understanding cleaning cycles • How to manually clean TrueSTEAM • How to replace the water filter • Service • How to identify fault root causes • How to fix faults

More Related