1 / 9

N-8000 SERIES

This guide provides instructions on how to set up and configure the Network Interface Card for the N-8000 SERIES IP Based Intercom System. It includes steps for remote control, system setting, remote maintenance, and communication between PC and N-8000.

schneidera
Télécharger la présentation

N-8000 SERIES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Setting of Network Interface Card N-8000 SERIES IP BASED INTERCOM SYSTEM

  2. Contents • Remote Control • Preparation • Setting of Network Interface Card (PC)

  3. Communication PC↔N-8000 • For accessing the LAN: • System Setting / Remote Maintenance (using PC) • by Setting Software • by Browser • Fixed (private) IP-Address • of Network Interface Card is needed ! • (Same IP-Range than N-8000-System)

  4. Communication PC↔N-8000 • How to setup?

  5. Communication PC↔N-8000

  6. Communication PC↔N-8000 Recommended: IP-Address: 192.168.1.XX Subnet Mask: 255.255.255.0

  7. Recommended ! Communication PC↔N-8000 • Which IP-Address-Range can be used? The Internet Assigned Numbers Authority (IANA) has reserved the following three blocks of the IP address space for private internets: 10.0.0.0 - 10.255.255.255 (10/8 prefix) 172.16.0.0 - 172.31.255.255 (172.16/12 prefix) 192.168.0.0 - 192.168.255.255 (192.168/24 prefix) (Source: RFC 1918)

  8. N-8540DS N-8000EX N-8000MI N-8000EX N-8500 Communication PC↔N-8000 N-8500MS Switch Communication Connection to switch: Use: Cat5 (UTP) Straight Through Cable Fixed private IP-Address

  9. N-8000EX Communication PC↔N-8000 Communication Communication: Direct Connection: PC to N-8000EX/MI or IP-Station Use: Cat5 (UTP) Crossed Cable!

More Related