1 / 21

Final Meeting

Final Meeting. INESCOP PROJECT PROGRESS AND DISSEMINATION ACTIVITIES. LIFE 10 ENV/IT/364. Pisa (Alicante) ICCOM-CNR 11th December 2013. Mercedes Roig Joaquín Ferrer INESCOP. 1. INESCOP Project Progress_1. 2. INESCOP Project Progress_2. 3.

seamus
Télécharger la présentation

Final Meeting

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Final Meeting INESCOP PROJECT PROGRESS AND DISSEMINATION ACTIVITIES LIFE 10 ENV/IT/364 Pisa (Alicante) ICCOM-CNR 11th December 2013 Mercedes Roig Joaquín Ferrer INESCOP 1

  2. INESCOP Project Progress_1 2

  3. INESCOP Project Progress_2 3

  4. Action 2. Environmental impact of fatliquoring agents Objective: To assess the environmental impact of different commercial fatliquoring agents Results: There are no relevant differences in the appearance of the leathers The polluting load of all baths was quite similar All physical properties tested are above recommended thresholds for their use in shoe uppers, leather goods, upholstery and garments None of the families assessed stand out for their lower environmental impact on wastewater or for their better quality in all the parameters – we will employ average values as a reference values 4

  5. Action 4-6. Environmental impact of natural products Objective: To assess the environmental impact of natural fatliquoring products comparing with commercial products (Action 2) Results: Leathers have an acceptable appearance, full and firm, with a soft and pleasant feel with no significant differences between of the natural fatliquoring tested Natural fatliquoring products were less than the As, Cd and Pb limits Comparing between synthetic and natural products with the same treatment, there was an improvement by: 30% in the biodegradability on chlorinated products (FAME vs CLP) 42% on sulpho-chlorinated products (FAME_S vs CLP_S ) The physical and chemical parameters of the leathers are according to the limits required for footwear manufacture 5

  6. Fogging Test_1 • Fogging refers to the condensation of evaporated, volatile components of the interior automobile trim materials on the glass plates. • The aim of this test is to increase driving safety, since certain fatliquorings and plasticisers released from leather can evaporate and condense on the windshield (due to the difference in temperature between the inside and the outside of the car) thus forming an opaque condensate that causes poor visibility. • Fogging test has been carried out according to the European standard test method for the determination of fogging characteristics for automotive leathers UNE-EN ISO 17071:2011.

  7. Fogging Test_2

  8. Leather biodegradability test_1 • Test procedure developed by INESCOP • Tests carried out on a prototype designed and built by INESCOP • Based on a standard test of plastic materials biodegradability • Comparative evaluation of biodegradability of different leather samples regarding to the impact of the leather waste Prototype developed by INESCOP for evaluation of biodegradability of leather samples (IR quantification)

  9. FAME_S 13,4 % FAME_S 13,4 % CLP_S: 11,2 % CLP_S: 11,2 % FAME: 10,5 % FAME: 10,5 % CLP: 7,7 % CLP: 7,7 % FAME_S 13,4 % CLP_S: 11,2 % FAME: 10,5 % CLP: 7,7 % Leather biodegradability test_2

  10. Action 7. Footwear manufacture No differences were observed in the manufacturing process and in the final appearance of footwear

  11. Action 11. Natural products fatting Manual

  12. Action 12. Leather sample books

  13. Action 16. Training course for Spanish tanneries ECOFATTING Training Course 20th June 2013 Elda - Alicante

  14. Action 18. Demonstration workshop in Spain ECOFATTING Workshop 7th November 2013 Valencia

  15. INESCOP’s Newsletters • INESCOP Environment Newsletter Jan’12 • INESCOP Environment Newsletter Feb’12 • INESCOP Environment Newsletter April’12 • INESCOP Environment Newsletter Jun’12 • INESCOP Environment Newsletter Jul’12 • INESCOP News Jun’12 • INESCOP Environment Newsletter Dec’12

  16. INESCOP’s dissemination at Congresses • Conference in Green Week 2012, Brussels (Belgium) • 1st Water, Waste and Energy Management Congress, Salamanca (Spain) • Industrial Technologies Congress 2012, Aarhus (Denmark) • 18th Congress of the Latin American Federation of Leather Technologists and Chemists (FLAQTIC 2012), Montevideo (Uruguay) • 62nd Congress of the Spanish Leather Chemists Association (AQEIC 2013), Lorca – Murcia (Spain) • LIFE+ Networking Event, Valencia (Spain) LIFE+ Networking Event May 2013 Valencia - Spain

  17. SIMAC-TANNING TECH–LINEAPELLE 8th to 10th October 2013 Bologna (Italy) Futurmoda 23rd-24th October 2013 Alicante (Spain) Ferias del Medio Ambiente y Energías 13th to 15th November 2013 Valencia (Spain) International conferences and fairs

  18. Technical article

  19. Updating the project website

  20. INESCOP´s final steps 20

  21. Thanks for your attention

More Related