'Hv test' diaporamas de présentation

Status of the Front Tracker GEM and INFN Electronics

343 views • 24 slides

Ferrara production center

Ferrara production center. R. Overview Of Operations. R. Production Readiness Review. P. Operations overview. Clean room. WGS machine: Wiring, gluing, soldering, pitch measurement WTM table: wire cutting, side bars gluing, wire tension measurement, open air HV test (single panel)

208 views • 20 slides

Introduction to GEM detectors assembly

33 cm. Introduction to GEM detectors assembly. 10 cm. 10 cm. Leszek Ropelewski CERN. 30 cm. 20 cm. 66 cm. NA61. Totem Upgrade. Compass. Totem. Outlook. Design phase: GEM foils (HV sectors, HV connectivity, stretching method)

282 views • 16 slides

Status report MEG DC 13/2/2006

Status report MEG DC 13/2/2006. Foil, cathode, hood, anode DC1 tests and measurements Preamplifiers Cables, connectors, cable panels, splitter + sum Cable duct, DC support, minibag Tests and Schedule. All Foils delivered : resistance tested by REPIC : geometry checked

268 views • 16 slides

Introduction to GEM detectors assembly

33 cm. Introduction to GEM detectors assembly. 10 cm. 10 cm. Leszek Ropelewski CERN. 30 cm. 20 cm. 66 cm. NA61. Totem Upgrade. Compass. Totem. Outlook. Design phase: GEM foils (HV sectors, HV connectivity, stretching method)

168 views • 16 slides

CIEMAT STATUS REPORT

166 views • 10 slides

Barrel integration status

167 views • 9 slides

Status of Torino-Dubna Production

Status of Torino-Dubna Production. Aluminum Plates production: Torino: steady production ongoing, 2715 plates cut, 194 chambers= 48 MB1 + 54 MB2+ 50 MB3+ 41 MB4).

158 views • 8 slides

ME4/2 Upgrade Project

ME4/2 Upgrade Project. Laminate production ( M.C.Gill ) Finished -- 580 sheets manufactured (enough for 290 panels) Panel production at Fermilab (thru 27 A pril) 37 new panels machined: 19 anode, 18 cathode (7 per CSC) Machining about 10/week (good match for chamber production)

100 views • 1 slides