'Main power switch' diaporamas de présentation

Setting up the SMART Board

Setting up the SMART Board. Shut down and turn off your computer before proceeding!. Set the SMART board approximately 6 feet from projector. 6 feet. Set the pens and eraser in the appropriate trays. Locate the SMART board connector.

392 views • 20 slides

Spin coater (LAMDA-P)

Spin coater (LAMDA-P). What is the spin coating?. Spin coating is a procedure used to deposit uniform thin films to flat substrates . Usually a small amount of coating material is applied on the center of the substrate, which is either spinning at low speed or not spinning at all.

1.35k views • 14 slides

Doppler Trouble Shooting 2013 WEBINAR

Doppler Trouble Shooting 2013 WEBINAR. WEBINAR TECH SUPPORT. THE THREE MAIN COMPONENTS TO A DOPPLER. CABLE. MAIN UNIT. TRANSDUCER PROBE. THE FIVE MOST COMMON ISSUES . Unit does not turn on Display shows but no sound Audio is not as good as it should be Loud crackly sounds come and go

229 views • 10 slides

Your switch is my command

182 views • 8 slides

Your switch is my command

182 views • 8 slides

Your switch is my command

181 views • 8 slides