A practical guide to handling of acuvue moist lenses!

2. To maintain proper health of the eye, it is important to follow some strict rules and instructions of lens wear and removal. Acuvue moist 90 day pack lenses are the most other category of lenses which are acuvue moist brand contact lenses for astigmatism, and acuvue moist brand multifocal lenses. While handling these lenses proper care has to be taken. Be cautious with every step of lens handling.

3. Steps of acuvue moist 90 day pack lens handling are: • Get started • When you get started with your lenses, be sure that you are using the right lenses. • Cleanliness is the most important factor of lens care. Always wash your hands with mild soap, rinse completely and wait until they are dried properly. Your hands should be free of creams, lotions or soap if present. • Make sure your hands are clean because when you handle the lenses without cleaning, they may cause scratches on the lens resulting in unclear vision.

4. Opening the pack • Each multipack has individually packed lenses. Sterile environment is essential. The simple process of opening the pack of lenses is shake the lens package so that lens float in the solution, remove back the foil closure to reveal the lens. Then place your finger on the lenses and slide it on the upside of the bowl of lens package. Follow the same procedure for both the lenses. • Do not use any tools like forceps or needles to handle the lenses. These many cause cracks in them and thus your vision will be affected. Also, do not allow your finger nails to touch the lenses.

5. Place the lens on the eye • Once you open the pack of lenses, by following these steps you can place the lenses on your eye. • Firstly, you have to be sure that the lens is not inside out because of any reason. Hold the lens on the index finger, and hold your upper eyelids with other hand so that you don’t blink. Pull down the lower eyelid with the hand you are using for insertion. Look up at the sky ceiling, slowly place the lens over the lower part of the eye. Then remove hands from eyelids and close your eyes for few minutes. Then blink the eye for some time. Follow the same procedure for the other eye too. • Main instruction here is always start with the same eye, either left or right.

6. Crosschecking the lenses • Once you insert the lenses into your eyes, check yourself whether the lenses are properly inserted or not. Make sure your vision is clear. If your vision is blurred, it indicated that lenses are not centered properly. Also check for any irritation produced in the eyes. This irritation may be because of any negligence like presence of soap or cosmetics or lotions on your hands, etc. in case there’s any irritation, remove them immediately. • 5. Centering the lenses • When your vision seems to be blurred, it means that the lenses are not properly centered onto the eye. The lenses rarely move from cornea to white part of the eye. To center the lenses, close your eyes and slowly massage the lens into place through the closed eye lids. This will center your lenses onto the cornea.

7. Thanks for Watching!!! • W: www.lenonline.in • M: +91 9321395854 • E: info@lenonline.in