1 / 13

Paratech Air Struts

Paratech Air Struts. SECTION: Tools and Equipment ISSUED: 02-2011 REVISED: ##-####. Objectives. To provide an understanding of the following Specifications Use Maintenance Safety. Specifications. Acmethread Strut 25-36 2 ½” diameter aluminum alloy inner threaded shaft

seth
Télécharger la présentation

Paratech Air Struts

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Paratech Air Struts SECTION: Tools and Equipment ISSUED: 02-2011 REVISED: ##-####

  2. Objectives • To provide an understanding of the following • Specifications • Use • Maintenance • Safety

  3. Specifications • Acmethread Strut 25-36 • 2 ½” diameter aluminum alloy inner threaded shaft • 3” diameter aluminum alloy outer tube • 50,000lb. axial crush strength • 25” – 36” length

  4. Specifications • Tips • Steel cone point base • Adds 1 ½” to strut length • V base • Rigid base • 12”x12”

  5. Specifications • Extensions • 12” strut extension • 24” strut extension

  6. Pressure Regulator • Piston type regulator • Up to 6000 psi incoming pressure • Safety valve set • 135 or 150 • Depending on model

  7. Dual Deadman Controller • Maximum operating pressure • 118 psi • Safety valve setting • 118 psi • Single inlet and dual outlets • Quick connect fittings • With locking rings

  8. Supply Hose • 16’ in length • 3/8” diameter • Maximum working pressure of 250 or 300 psi • Depending on model • Burst pressure at 1000 psi • Equipped with threaded lock rings • Black hose • From regulator to dual deadman control valve • Color hose • From dual deadman control valve to lifting bag

  9. Use • Trench collapse • Attach proper tips and hoses prior to lowering into trench • Building collapse • Vehicle stabilization

  10. Operating ProcedurePressure Regulator • Attach to an SCBA cylinder • Adjust outlet pressure • Turn adjusting knob to set at 135 psi

  11. Operating ProceduresDual Deadman Controller • Attach black hose from regulator • Complete with locking ring • Attach colored hose(s) to outlet(s) • Complete with locking ring • Dual safety deadman valves • Up is green • Down is red

  12. Maintenance • Check overall condition of strut • Clean with mild soap and water • Check elasticity of rubber gasket • Ensure movement of strut • Ensure locking collar moves freely • Check threads for damage or burrs

  13. Safety • Wear appropriate PPE • Minimum of helmet, gloves, and eye protection • Ensure tips/extensions are locked in place before use • Lock strut in place with locking collar • Never over pressurize strut • Never lift load with strut • Never use more than 2 extensions per strut for maximum of 3 feet extension • Maximum strut length 6 feet

More Related