1 / 11

Analysis and quantification of foaming phenomena in wet FGD plants

Analysis and quantification of foaming phenomena in wet FGD plants. Siqiang QIN Ph.D. student. Supervisors: Søren Kiil Brian Brun Hansen. Content. Introduction Foaming and antifoam in wet FGD Future work. Introduction.

shaeleigh-cross
Télécharger la présentation

Analysis and quantification of foaming phenomena in wet FGD plants

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Analysis and quantification of foaming phenomena in wet FGD plants Siqiang QIN Ph.D. student Supervisors: SørenKiil Brian Brun Hansen

  2. Content • Introduction • Foaming and antifoam in wet FGD • Future work

  3. Introduction The wet scrubber FGD process is the most widespread desulphurisation technology. Source: WPCA/Duke:2008

  4. Fundamental chemistry in wet FGD • Major reactions (Kiil, 1998) • The absorption of SO2 • The oxidation of HSO3- to SO42- • The dissolution of the reactant (limestone) • The crystallisation of gypsum • This study will focus on the foaming issue in wet FGD • Long term foaming ability • Long term effects on antifoam ability • The interaction of foaming and antifoam on desulphurisation efficiency

  5. What is foam? Foam: is a gas dispersed in a liquid with some impurity. Foam in FGD Reactor Tank: Bad Foam Good Foam Source: Mega Symposium 2008

  6. Foam in wet FGD What kind of issue can foam induce? • Wrong Liquid levels readings • cavitation of recycling pumps • short gypsum residence/growth time • Foam in reactor tank can enter ductwork and flow into equipment • Housekeeping problems • Corrosion • Wrong density measurement • no gypsum withdrawel & excessive solid concentration Source: Encyclopædia Britannica, Inc.

  7. Strategies to solve foam problems in wet FGD • Design View: • Inlet duct floor temperature indicators • Reaction tank “viewing stations” • Foam Detection Nozzles • Chemical View: commercial deformers: mixtures of hydrophobic liquids and solids Source: Siemens AG 2007 5

  8. Foaming agents and antiformers Foaming agents: SDS; adipic acid; two albumins Commerical antifoam: GE Foamtrol AF 2290; GE Foamtrol AF 1440; NALCO antifoam 7468; NALCO antifoam 7468; Dow Corning 1430. Antifoamselection: pH value; Temperature; Viscosity; Solid content.

  9. Set-ups • Long term foaming stability and antifoam ability • SO2 removal efficiency • Gypsum quality wet FGD pilot plant Bikerman column (lab-scale)

  10. Future work • Literature survey: foaming and defoaming • Investigation of foaming and wastewater treatment • Foaming and defoaming experimental investigations with selected additives • Duration ability of defoamers (long-term effects of defoamers) • Quantification of observed foaming and defoaming phenomena • Recommendations for full-scale use

  11. Thank you for your attention ! Sea foaming

More Related