1 / 52

Glacial Facies

Glacial Facies. chapter 10. Glacial Facies and Fabrics. General Review of Facies. Facies A body of sediment with a distinctive combination of properties that distinguish it from neighboring sediments.

shaeleigh-newman
Télécharger la présentation

Glacial Facies

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Glacial Facies chapter 10

  2. Glacial Facies and Fabrics

  3. General Review of Facies • Facies • A body of sediment with a distinctive combination of properties that distinguish it from neighboring sediments. • Stratigraphic units distinguished by lithologic, structural, and organic characteristics detectable in the field.

  4. 3 Methods of Describing Facies • Lithofacies • Describes physical characteristics of the deposit • Silt laminae • Cross-bedded sand • Genetic facies • State or imply a specific mode of formation • Fluvial or eolian dune-bedded sands • Biofacies • Defined by the presence / lack of some kind of biological material

  5. Glacial Facies and Walther’s Law TravisCorthouts

  6. Johannes Walther I“It is a basic statement of far-reaching significance that only those facies and facies-areas can be superimposed primarily which can be observed beside each other at the present time.”

  7. Walther’s Law "Facies adjacent to one another in a continuous vertical sequence also accumulated adjacent to one another laterally" • As adjacent depositional environments migrate laterally, sediments from one environment will come to lie on top of another. • This overlapping will produce a vertical progression of facies which mirrors the original lateral distribution of depositional environments.

  8. Puget lobe glacial facies –lateral movement  vertical sequence

  9. Walther’s Law Exceptions • The law is invalid where the contact between different lithologies is non-conformable (due to lack of deposition), or during cases of rapid environmental change when non-adjacent environments may replace one another.

  10. Facies Characteristics Ice Contact Facies: • Unstratified diamictites and tillites • Poorly sorted sediment • Striated or polished clasts • Preferred orientation of long axis (crude imbrication) • Diverse clast assemblages • Proglacial to Periglagial Facies: • Reworked by melt-water, which may produce sedimentary structures. • Better sorting • Freeze-thaw process in periglacial zones = better stratification. • Loess

  11. Glacial E.O.Ds and Associated Facies Most diverse grain size sedimentary system Primary Glacigenic Deposits (Ice-Contact Zone) Glacifluvial Deposits (Proglacial) Gravity Mass-Movement Deposits (Glacilacustrine/–marine) Suspension Settling and Ice-Rafting (Glacilacustrine/ –marine) • Ripples cross-laminated facies • Cross-bedded facies • Gravel sheets • Silt and mud drapes • Scree/debris-fall deposits • Debris-flow deposits • Turbidites • Slide and slump deposits • Varves • Mud and diamicton dropstones • Undermelt diamicton • Lodgement till • Glaciotectonite • Deformation till • Melt-out till • Other tills… E.O.D = Environment of Deposition

  12. Ice-contact zone = very poorly sorted sediment = glaciotectonite... TILLS! Pro/periglacial zone with a braded melt-water stream. Facies will be more sorted and stratified, as well as more fine grained. Possible cross-bedded facies.

  13. Stratigraphic Column Killer Ice!!!

  14. A B C

  15. Glacial sedimentation is dominated by retreat deposits. • Advancing glaciers are more likely to destroy older glacial facies sequences than retreating glaciers. • Therefore, Walther’s Law is most applicable to facies sequences and associations for receding glaciers.

  16. Indicator Facies • Diamictites: Commonly deposited at ablation zones along glacial margins as melt-out tills or any poorly sorted gravelly deposit. • Loess: Often accumulates in periglacial region as wind-blown deposits. • Varves: Usually originate from annual deposits in proglacial and periglacial lakes but may also originate from other cyclic deposits caused by seasonal waxing/waning of glaciers. • Dropstones: Good indicator of glacial lacustrine/-marine environments where ice rafted debris was deposited as dropstones.

  17. How we know it’s a dropstone: “On-lap” of sediment at top contact Deformation/penetration of laminated sediment at bottom contact.

  18. Facies model (Anderson, 1989)

  19. Ice-marginal environments Till ** Ablation till G-lac. drift Dropstones G-lac. drift Kame deltas Till Lodgment till Till Moraines Alluvium ** Kame terraces Alluvium Outwash/drift Alluvium Eskers Alluvium Outwash

  20. THE END

  21. from here on – not presented in class slides from MSU class

  22. Sequences: Events and Materials • Active ice • Lodgment • Flowtill • Outwash • Stagnant ice • Melt-out

  23. Till Fabrics • Orientation of clasts in space • Reflects accumulated deformation

  24. Till Fabrics

  25. Modified Foliation • Finally, foliation fabric forms fully!

  26. Glacial Sequences (Boulton) • Spatial and temporal distribution of erosion AND deposition • Marginal till sequences

  27. Glacial Sequences (Boulton) • Spatial and temporal distribution of erosion AND deposition • Marginal till sequences • Ice sheet synthesis

  28. Glacial Sequences (Boulton) • Spatial and temporal distribution of erosion AND deposition • Marginal till sequences • Ice sheet synthesis

  29. Till Sequence example: Illinois • Loess / Malden till / red Tiskilwa till / gray Tiskilwa till / bedrock • Unclear boundaries and genesis • Interpretation of genetic facies

  30. Till Sequence example: Illinois

  31. Montana plains • Fullerton et al., 2004, USGS SI-2843

  32. Till sequence • “Illinoisan” • Wisconsinan • Late Wisconsinan • But… • How know age? • Alternative working hypotheses?

  33. Till facies • Glacier tills • Ice sheet tills • Modified tills

  34. Till facies

  35. Drift of Coastal New England Outwash Outwash Interlobate Moraine “Ground Moraine” Terrestrial End Moraines Marine(?) End Moraines

  36. End Moraine Facies Flowtill Mud/debris flow Sheetflow Debris flow Bar gravel Debris flow Sheetflow HyperX flow Distal flowtill HyperX flow Sheetflow HyperX flow Sheetflow Stream flow Stream flow Overbank Gelifluction

  37. Facies Distribution • NOTE: • May be gradation from pure till to type A as well as among types!

  38. Distinction from Outwash

  39. Grounded Ice andGlaciofluvial Locations

  40. Grounded Ice Facies:Unstratified Diamicts • Bimodal Particle Size Distribution: • Unsorted pebbles, cobbles, and boulders • Interstitial matrix of sand, silt, and clay • Elongate particles show preferred orientation • Some crude imbrication • Long axes dipping upstream

  41. Stratified Diamicts • Sediments generated by: • Supraglacial, englacial, subglacial processes • Better sorting • Lack the bimodal size distribution associated with direct deposition • Pebbles may be rounded by meltwater transport • Some stratification from reworking • Seen in the form of kames, kame terraces, eskers

  42. Glaciofluvial Deposits

  43. Glaciofluvial Deposits • Can be deposited in: • Subglacial and englacial conduits • Supraglacial and proglacial streams • Lithofacies reflect local sediment supply • Well stratified and feature sedimentary structures at varying scales • Dependent on stream discharge and sediment supply

  44. Kames • Small mound-shaped accumulations of sand or gravel • Form in pockets or crevasses in the ice • Commonly feature fining upwards sequences • Large unsorted clasts overlain by sands & silts • Thermal?

  45. Eskers • Narrow, sinuous ridges of sediment parallel to ice flow • Can include gravels, sands, and silt • Some facies may be extremely well stratified • Feature gravels overlain by fine, fluvial sediments • Topped or interbedded with diamictites

  46. Glacier Marine Sediment Facies By: Scott Patterson Geol 445 Glacier Geology 4/5/03

  47. Glacier Marine Sediment Facies: Definitions Till – terrestrial, primary glacier deposited diamicton Glacimarine drift – “marine till” Facies – stratigraphic units distinguished by lithologic, structural and organic characteristics detectable in the field (Boggs 2001)

  48. Proximal vs. Distal Eyles et al 1991 & Boggs 2001

  49. Distal Glacier Marine Facies Characteristics • Settled sediment • Extreme variation in clast type (lithology and source) • Dropstones – with soft sediment deformation • Stratification • Marine fossils (forams and diatoms)

  50. Sediment plumes off a glacier (Cofaigh, 2001) Soon to be Settled Sediment; Norway

More Related