1 / 35

Digital Radiology

Digital Radiology Dr M A Oghabian Medical Physics Group Tehran University of Medical Sciences www.oghabian.net. Digital Radiology. Aim : To become familiar with the digital imaging techniques in projection radiography and fluoroscopy. Transition from conventional to digital radiology.

sharonreed
Télécharger la présentation

Digital Radiology

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Digital RadiologyDr M A OghabianMedical Physics GroupTehran University of Medical Scienceswww.oghabian.net

  2. Digital Radiology • Aim: To become familiar with the digital imaging techniques in projection radiography and fluoroscopy. Add module code number and lesson title

  3. Transition from conventional to digital radiology • Digital images can be numerically processed • Digital images can be easily transmitted through networks and archived • Attention should be paid to the potential increase of patient doses due to tendency of : • producing more images than needed • producing higher image quality not necessarily required for the clinical purpose Add module code number and lesson title

  4. What is “dynamic range”? • Wide dose range to the detector, allows a “reasonable” image quality to be obtained • Flat panel detectors (discussed later) have a dynamic range of 104 (from 1 to 10,000) while a screen-film system has approximately 101.5 Add module code number and lesson title

  5. Characteristic curve of CR system 3.5 3 2.5 2 1.5 1 0.5 0 HR-III CEA Film-Fuji Mammofine CR response Density 0.001 0.01 0.1 1 Air Kerma (mGy) Add module code number and lesson title

  6. Analogue versus digital Analogue: A given parameter can have continuous values Digital: A given parameter can only have discrete values NUMERO

  7. What is digital radiology? • In conventional radiographic images, spatial position and blackening are analogue values • Digital radiology uses a matrix to represent image • A matrix is a square or rectangular area divided into rows and columns. The smallest element of a matrix is called ”pixel” • Each pixel of the matrix is used to store the individual grey levels of an image, which are represented by positive integer numbers • The location of each pixel in a matrix is encoded by its row and column number (x,y) Add module code number and lesson title

  8. Digital radiology process • Image acquisition • Image processing • Image display • Importance of viewing conditions • Image archiving (PACS) • Image retrieving • Importance of time allocated to retrieve images Add module code number and lesson title

  9. Digitizing conventional films • Conventional radiographic images can be converted into digital information by a “digitizer”, and electronically stored • Such a conversion also allows some numerical post-processing • Such a technique cannot be considered as a “ digital radiology” technique. Add module code number and lesson title

  10. Different number of pixels per image: original was 3732 x 3062 pixels x 256 grey levels (21.8 Mbytes). Here, resized at 1024 x 840 (1.6 MB). Add module code number and lesson title

  11. Scintillation-based DR Gadolinium Oxy-sulphide Detector

  12. Digital Radiography Systems • Phosphor photostimulable plates (PSP). • So called CR (computed radiography) • Conventional X-ray systems can be used • Direct digital registration of image at the detector (flat panel detectors). • Direct conversion (selenium) • Indirect conversion (scintillation) Add module code number and lesson title

  13. Computed Radiography (CR) • CR utilises the principle of photostimulable phosphor luminescence • Image plate made of a suitable phosphor material are exposed to X-rays in the same way as a conventional screen-film combination • The CR image plate retains most of the absorbed X-ray energy, in energy traps, forming a latent image Add module code number and lesson title

  14. Computed Radiography (CR) • A scanning laser is then used to release the stored energy producing luminescence. • The emitted light, which is linearly proportional to the locally incident X-ray intensity is detected by a photo multiplier/ADC configuration and converted to a digital image • The resultant images have a digital specification of 2,370 x 1,770 pixels (for mammograms) with 1,024 grey levels (10 bits) and a pixel size of 100 mm corresponding to a 24 x 18 cm field size Add module code number and lesson title

  15. The principle of PSP ADC PMT CB Trap Excitation Storage Emission Add module code number and lesson title

  16. كــريــستــال هــالـيــد فــلــوريــد بــاريــم فــعــال شــده بـا يــوروپــيــوم (Europium Activated Barium FluoroHalide) BaFX:Eu , (X= Cl, Br, or I) Add module code number and lesson title

  17. Add module code number and lesson title

  18. Casette and PSP PSP digitizer (Images courtesy of AFGA) Workstation Add module code number and lesson title

  19. DR Detecting Systems Add module code number and lesson title

  20. Add module code number and lesson title

  21. Direct vs indirect conversion detectors Add module code number and lesson title

  22. CCD Based Detection System Add module code number and lesson title

  23. Add module code number and lesson title

  24. Add module code number and lesson title

  25. Digital detector Add module code number and lesson title

  26. Amorphous Selenium Detector Add module code number and lesson title

  27. Digital fluoroscopy • Digital fluoroscopic systems are mainly based on the use of image intensifiers (I.I.) • In conventional systems the output screen of the I.I. is projected onto a video camera system or a CCD camera • The output signals of the camera are converted into a digital image matrix (1024 x 1024 pixel in most systems). • Some new systems start to use flat panel detectors instead of image intensifier. Add module code number and lesson title

  28. Add module code number and lesson title

  29. Add module code number and lesson title

  30. Tendency to increase dose ? • For digital detectors, higher doses result in a better image quality (less “noisy” images) • When increasing dose, the signal to noise ratio is improved • Thus, a certain tendency to increase doses could happen specially in those examinations where automatic exposure control is not usually available. Add module code number and lesson title

  31. The digital radiology department • In addition to the X-ray rooms and imaging systems, a digital radiology department has two other components: • A Radiology Information management System (RIS) that can be a subset of the hospital information system (HIS) • A Picture Archiving and Communication System (PACS). Add module code number and lesson title

  32. Results To Webserver • Modality Worklist Information DICOM Images Verified HL7 HL7 HL7 Radiologist WorkStation Broker Voice Rec. Server Transcription Pool E-gate HIS RIS Add module code number and lesson title

  33. Data management RIS PACS • We write a report! • Link both PACS and RIS. • Report compares Orders on RIS with Images on PACS. • Report highlights RIS orders with No images! Add module code number and lesson title

  34. DICOM • DICOM (Digital Imaging and Communications in Medicine) is the industry standard for transferal of radiological images and other medical information between different systems • All recently introduced medical products should therefore be in compliance with the DICOM standard • However, due to the rapid development of new technologies and methods, the compatibility and connectivity of systems from different vendors is still a great challenge Add module code number and lesson title

  35. DICOM format images: • Radiology images in DICOM format contain in addition to the image, a header, with an important set of additional data related with: • the X ray system used to obtain the image • the identification of the patient • the radiographic technique, dosimetric details, etc. Add module code number and lesson title

More Related