1 / 13

Tools

Tools. Unlock the power of the tools in the Carlisle Tool-Crib to help you design, install and tension your belt drives. Carlisle Tool-Crib. Sheave Gauges - plastic sheave templates $3.75 each part numbers : 102495 — RMA & Metric combined gauge.

shaw
Télécharger la présentation

Tools

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Tools

  2. Unlock the power of the tools in the Carlisle Tool-Crib to help you design, install and tension your belt drives.

  3. Carlisle Tool-Crib Sheave Gauges- plastic sheave templates $3.75 each part numbers: 102495 — RMA & Metric combined gauge SheaveMaster- laser alignment tool. The SheaveMaster is a laser tool for fast and accurate alignment of belt drive pulleys. (part number: 108076-A) $750.00 each Tension Finder- introducing a new tensioning tool from Carlisle Power Transmission - a simple, easy and accurate alternative for tensioning of individual belts or v-bands. (part number: 108039-A) $24.00 each Wallboard Display- a popular inventory and display system for v-belts. Includes 10 boards and 80 wallboard hooks. (part number: 93899)  currently not available

  4. Carlisle Tool-Crib Tensiometer- single, double and triple stem belt tension tester. part numbers: single 102761— double 105575 — triple 105576 —   Drive Engineer - drive design software. Contact us on-line (sales@c-rproducts.com) to receive a free copy of Drive Engineer (€25 value) or call customer service on +44 1327 701030.  Frequency-Finder- allows you to take simple, fast, repeatable and reliable tension measurements and can be used on virtually any type of belt. part number: 109061 — Belt-Finder - belt measuring device. Find the exact Carlisle replacement belt instantly.  part number: 93859 —

  5. Sheave Gauges • RMA and Metric combined • Sheave condition and alignment are • vital to V-belt life and performance • New V-belts should never be installed • without a thorough inspection of the • sheaves • Use the sheave gauge to accurately • check grooves for wear • Wear should not exceed 1/32” for • individual V-belts or 1/64”for banded • V-belts

  6. SheaveMaster Laser Alignment • Laser tool for fast & accurate alignment • Magnetically mounted tool & 3 targets • Quickly correct angular, offset and • twist misalignment • Only one person is needed • Water, dust and shock proof • Permanently calibrated • Can be used indoors or out

  7. Tension-Finder • No Measurements • No Math • No O-rings • No Computers • It’s Practical • It’s Reusable • It’s Easy • It Works!

  8. Wallboard Display/Belt Racks • Popular inventory and display system for V-belts • Includes 10 boards and 80 wallboard hooks • Plastic board is 36 inches long, hooks extend 5 3/8”

  9. Spring Loaded Tension Gauges • Tensioning method based on the fact that the force required to deflect a given span length by a given amount is related to the tension in the belt • Proper tensioning of V-belts is the single most important factor necessary for long, satisfactory operation • Too little tension will result in slippage, causing rapid belt and sheave wear • Too much tension can result in excessive stress on belts, bearings, and shafts

  10. Drive Engineer • Windows®-based program • User friendly • New drive selection • Existing drive analysis • New generation of analysis software that helps end users increase their drive efficiency, drive life and overall knowledge of belt drives • Download from our website www.cptbelts.com or call customer service 866-773-2926

  11. Frequency-Finder • Measures the natural frequency • of vibration in the belt span • Simple, fast, repeatable and • reliable • Can be used on virtually any • type of belt • Most precise method

  12. Belt-Finder Measuring Tool • Find the exact Carlisle • replacement belt instantly • A quick check shows the top • width and length / part no. • Check Classical A & B belts, • Durapower or XDV, plus • 3VX and 5VX Power-Wedge

  13. www.CarlisleBelts.com from www.c-rproducts.com sales@c-rproducts.com Tel: +44 1327 701030 Fax: +44 1327 701031

More Related