1 / 39

ETX-5300A

ETX-5300A. Release version 1.0 GA. ETX-5300A Main Market Messages. ETX-5300A is a carrier grade Access Aggregation Switch. Device. ETX series is a real end-to-edge access solution. Solution. RAD access solution reduces Total cost of ownership. Economies. Why We Think ETX-5300A is a Winner.

signe-donaldson
Télécharger la présentation

ETX-5300A

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ETX-5300A Release version 1.0 GA

  2. ETX-5300A Main Market Messages ETX-5300A is a carrier grade Access Aggregation Switch Device ETX series is a real end-to-edge access solution Solution RAD access solution reduces Total cost of ownership Economies

  3. Why We Think ETX-5300A is a Winner • Highest capacity-to-size ratio in the market • Best mechanisms for network efficiency • Reduce costs by freeing up PE capacity, cutting price per link • Complements RAD’s ecosystem • Warm reception by tier-1 carriers

  4. ETX-5300A: Ethernet Aggregation + Pseudowire Gateway 3U 17.3” 14.9” • Chassis: • 3U Height • 4 I/O slots – 20 GbEslot • Redundant main switching card with 4 x 10 GbEports • Power Supply: • Redundant PSU AC/DC • Performance: • 200 GbEswitch fabric • 100 GbE switching capacity • 2 x Main Card, each supporting: • 4 x 10 GbEXFP (Max of 8) • 1+1 port or card redundancy • 4 x I/O cards, each supporting: • 20 x 1 GbE SFP/UTP (Max of 80) • 2 x 10 GbE XFP (Max of 8) • 4 x Ch. OC3 PWE3 (Max of 16) • Environment: • 0°C to 50°C • Timing: • IEEE 1588-2008: M,S & TC • Sync-E: External & Master • 1PPS, TOD & 10 MHz for phase and frequency lock • Architecture: • E-line; E-LAN • OAM 802.1ag/Y.1731 per flow • Port redundancy (APS/LAG) • Ring G.8032 (2 x 10 GbE, 10 x 1GbE)

  5. ETX-5300A Front View Description Redundant PSU (DC/AC Outlet) Clocking Interfaces Fan Module Front View Access 4 x 10GbE XFP fully redundant Secondary Main Card Primary Main Card Alarm output connector 20 x 1GbE Opt SFP I/O card 20 x 1GbE Elec I/O card Air Filter

  6. ETX-5300A Scale • ETX-5300A features the smallest form-factor and highest capacity-to-size ratio in the market for aggregation devices • It can be cascade 12 devices in standard ETSI rack mount with all front access cable management Reaching 960 x GE ports + 96 x 10GE ports in a lowest power consumption = less than 6KW

  7. Markets & Applications

  8. Carriers and Operators • SLA-based business Ethernet and cloud connectivity • Wholesale and carrier-to-carrier (E-NNI) connectivity • Mobile backhaul • Legacy TDM service emulation

  9. Private Networks Seamless migration from SDH/SONET to PSN: • Utilities • Transportation • Government • Healthcare • Education

  10. Optimizing Service Experience in the Access Network SLA-based Services E2E Traffic management Access Aggregation “Pre-Aggregation” Access Aggregation “Pre-Aggregation” Access Access Aggregation Network ETX-5300A Metro + Core ETX-5300A ETX-205A ETX-205A ETX-220A ETX-220A ETX-220A ETX-203AM ETX-203AX

  11. Application Scenarios

  12. Access Aggregation 1 GbE and 10 GbE Aggregation Access Segment Middle Mile First Mile • Complete Access Solution • OAM • TM • Timing • SDH/ SONET Replacement • PW (Legacy Migration) ETX-203AX ETX-203AM FE/GbE Core 1 GbE (LAG) ETX-220A 10 GbE (LAG) 10 GbE ETX-5300A 10 GbE Metro ETX-220A 10 GbE 10 GbE 10 GbE (LAG) ETX-220A ETX-220A 10 GbE Ring ETX-205A 1 GbE (LAG) ETX-220A

  13. Access Aggregation Ring Aggregation Base on Standard G.8032v2 Access Segment Middle Mile First Mile • Ring Access Aggregation • G.8032v2 support up to 16 rings with 32 members in a ring • SDH and TDM PW Migration Core ETX-5300A 1GbE Ring ETX-5300A 10 GbE Ring Metro ETX-5300A 10 GbE Ring ETX ETX ETX ETX

  14. Ethernet & TDM Pseudowire RADview Ethernet & TDM PW Traffic ETX+MiTOP Up to: 16 OC-3/STM-1 T1/E1 or T3/E3 TDM/ SONET 2 x FE / GbE ETX-205A* ETX-5300A* 4 or 8 E/T1 GbE/10 GbE Ethernet, IP or MPLS 5 x FE / GbE ETX-220A IP/ETH 8, 16 or 32 E1/T1 GbE/10 GbE 8 x FE / GbE IPmux-24/IPmux-216 ETX-5300A Sample Configurations 1,2,4,8 or 16 E1/T1 2 x FE / GbE IPmux-1E 4 FXS/FXO/E&M/BRI MP-4100/2100 160 x T1/E1 160 x analog phones 120 a serial interfaces and more… MPW / ML-IP

  15. Mobile Backhaul solution MME RAD Access solution for Mobile Timing feeder ETX-220MP ETX-5300A Router PE PE GbE ETX-205A ETX-205A Up to 20 Units ETX-5300A 10 GbE 10 GbE 10 GbE IP/MPLS ETX-205A ETX-205A G.8032v2 ETX-205A

  16. Product Description

  17. ETX-5300A Fully Redundant Platform • 3U fully redundant service box: • Up to 80 x GbE & 8 x 10GE / 16 x 10GE • Up to 16 STM-1 & 8 x 10GE • Non-blocking architecture with wire speed packet forwarding for all packet sizes • Ethernet and TDM Services • E-Line (EPL and EVPL), E-LAN (EP-LAN and EVP-LAN) • TDM / TDM PW / MEF8 & UDP/IP encapsulation • Ring & Linear topologies • Fully redundant chassis including 50 ms switchover • VLAN Forwarding & manipulation • Hierarchical Traffic management • Network Termination Unit like packet classification • Timing over packet – 1588v2, M&S Sync-E

  18. Supported Cards ETX-5300A Release 1.0 19” 3U 4 x 10GbE & 80 x GbE /16 x STM1/OC3

  19. Main System Card • The main card is the core packet processing unit of the ETX-5300A machine • At least one main card is required in each shelf • The main card supports: • Packet forwarding processing engine • Shelf and host/device management • Clock unit • On card 4 x 10GE XFP interfaces • 4096 EVCs • Timing options • 3 CLK domains • Station clock Input & Output • 64K/1.544/2.048 Bal/Unbal/Square • GPS I/F • Input & Output • 10MHz • 1 PPS • TOD • Main Card type: • On card 4x10GE Interfaces • No on card 10GE Interfaces

  20. Ethernet IO Card • The Ethernet IO supports 2 x 10 GbE or 20 x 1 GbE ports with either optical or copper interfaces (copper option for the 20 x 1GE) • Non blocking architecture based on RAD FPGA that provides full 20 GbE • 2K flows are supported on each IO card • SyncE & IEEE-1588-2008 on all ports • P2P & MP2MP services are supported • Link Aggregation between ports and cards • Main Card type: • 2 x 10GE XFP I/F • 20 x 1GE Optical SFP I/F • 20 x 1GE Electrical UTP I/F

  21. Multi-Service IO Card • The Multi-Service IO card supports • 4 Ch. OC-3/Ch. STM-1 interfaces • 4 x Ch. OC-3/Ch. STM-1 or Ch. OC-12/Ch. STM-4 – II phase • Ch. OC-48/Ch. STM-16 – II phase • Per card, user configurable SONET/SDH mode  • TDM PW, MEF 8 & UDP/IP encapsulation • STM-1/OC-3 Interface characteristics: • 63E1 or 84 T1s over STM-1/ OC-3 respectively per G.707 • STM-1/OC-3 SFP LC connector • E1 mapping to STM-1: • STM-1 / AU-4 / VC-4 / TUG-3s / TUG-2s / TU-12s / VC-12s /E1s • T1 mapping to OC-3: • OC-3 / STS-1 SPEs / VT Group/ VT1.5s/ T1s

  22. The ETX-5300A MEF Services • E-Line Service – used to create • Ethernet Private Lines (EPL) • Virtual Private Lines • Ethernet Internet Access Point-to-Point EVC UNI UNI Healthcare, Ethernet Private Line (EPL) Multi-point to Multi-point EVC • E-LAN Service – used to create • Multipoint L2 VPNs • Transparent LAN Service • Multicast networks UNI UNI UNI Government, Campus Connectivity • E-Tree Service – used to create* • Rooted multi-point L2 VPNs • Broadcast networks • Telemetry networks UNI Rooted Multipoint EVC UNI Dedicated Internet Access (DIA) UNI * Roadmap

  23. ETX-5300A TDM Services Fully Redundant 10 GbE / 1 GbE TDM PWs • TDM Services: • Ch. STM-1/OC-3 TDM service • Configure SONET/SDH mode per card • OAM: • STM-1/OC-3 Line loopbacks • E1/T1 Loopbacks • PM & Alarms per GR.253 • Resiliency: • Automatic Protection Switching APS • On the same card • Between Cards • TDM IO card hot swappable IP/ETH Network Up to 16 OC-3/STM-1 Lines TDM Network • PW Services: • TDM PW SAToP & CESoP per MEF8 • TDM PW SAToP & CESoP per UDP/IP • OAM: • VCCV-BFD for UDP/IP • RAD PW OAM • PM 15 minutes intervals at the SONET/SDH level • PM 15 minutes intervals at the E1/T1 level • Resiliency: • 1:1 PW redundancy • Alarms & Counters: • TDM PW buffer overrun • Remote packet loss • Jitter Buffer • Round trip delay • No. of PWs in OC-3 mode: 1344 • No. of PWs in STM-1 mode: 1008 • PW per single T1\E1 • 336 PWs supported per service card

  24. Robustness: Source Steering Protection Failure 50ms Switch Times ETX-5300A Redundancy • Ethernet Ring Protection G.8032v2 • Ladder topology & 50ms switch over • Protection and recovery switching within 50 ms for typical rings • 1G & 10G Multi Ring topologies support • Supports Unicast and Multicast flows

  25. ETX-5300A Redundancy (cont.) • Link Aggregation per 802.3 clause 43 (former 802.3ad) • Enables protection between associated ports • Intra card and Inter card LAG • Static LAG and LACP • Main card redundancy • Clock redundancy • APS redundancy on TDM ports • Port redundancy • Power Supply Redundancy Intra Card LAG Inter Card LAG Inter Card LAG Intra Card LAG

  26. OAM Scheme Subscriber Equipment • ETX-2xxA is represented by units 2 and 7 • ETX-5300A is represented by units 3 and 6 • Both products support MIPs and MEP Subscriber Equipment Operator A NEs Service Provider Operator B NEs 1 2 3 4 5 6 7 8 Subscriber ME ETH EVC ME Operator A service ME Operator B service ME UNI ME UNI ME Tunnel ME TRAN ETX-5300A ETX-5300A ETX ETX

  27. ETX-5300A OAM (cont.) • Connectivity Fault Management defined by 802.1ag • CC: Connectivity Check • CCM interval (at MA level): 3.33ms, 10ms, 100ms, 1s, 10s, 1m, 10m • LB: LoopBack • LT: Link Trace • Performance Management defined by Y.1731 • LM: Loss Measurements • DM: Delay Measurements • Statistics per service • Reporting per Event

  28. Timing over Packet Technology • IEEE 1588v2 • Frequency, Phase, Time of Day (ToD) • Excellent for mobile backhaul • Sync-E • Frequency • Excellent for mobile backhaul • Adaptive Clock Recovery • Frequency, Phase • Excellent for business grade TDM • Not dependant on complete network deployment RAD SYNC Adaptive 1PPS, 10MHz 1588-2008 1588-2008 Sync-E Sync-E E1/T1/OC3/STM-1 E1/T1/OC3/STM-1

  29. What’s ? • RAD’s platform for high-performance clock recovery and distribution techniques with powerful frequency and phase alignment • Includes the following technologies: • IEEE 1588-2008 • Synchronous Ethernet • Bridging between the technologies • Offering Uniform solution through RAD’s portfolio • RAD: The Synchronization Expert • Adaptive clock recovery technology (ASIC- and FPGA-based) solutions since 1999 • TDM-over-IP technology leader • Broad installed product base • Standardization leadership

  30. ETX-5300A Mechanical overview and Shelf Types • ETX-5300A mechanical dimensions: • Height: 13.3cm (5.2 in) • Depth: 380mm (15in) for DC chassis • Depth: 455mm (23.6 in) for AC/DC • Width: 440mm (17.3in) • Ready For 600mm rack ( cables etc.)

  31. General MBH Application Scenario – Wholesale MBO MBO Wholesale Provider Wholesale Provider ETX-1002/ ETX-5300A ETX-1002/ ETX-5300A MBO M/W Area M/W Area RNC/aGW G.8032 Ring ETX-5300A ETX-5300A ETX-5300A ETX-5300A ETX-5300A ETX-5300A ETX-5300A ETX-5300A G.8032 Ring ETX-220 ETX-220 G.8032 Ring G.8032 Ring ETX ETX ETX ETX ETX ETX ETX ETX ETX ETX ETX ETX ETX ETX ETX ETX ETX ETX ETX ETX ETX ETX RNC/aGW MBO BSC BSC Ch-STM1 Ch-STM1

  32. Why Access Aggregation? MBO Wholesale Provider ETX-1002/ ETX-5300A • Aggregates SLA-based Ethernet & legacy TDM for mobile backhaul • Provides E-NNI demarcation, Ethernet OAM termination and services grooming • Ethernet linear and ring topology & protection switching: ITU-T G.8032 • Extensive Sync-E, 1588v2 master mode • Enables efficient handling of multi-priority traffic on a per-flow basis, • offers various tools to ensure Six Nines availability and sub-50ms restoration with no single point of failure • 3U device with high port density, delivering a 100 Gbps throughput MBO M/W Area RNC/aGW G.8032 Ring ETX-5300A ETX-5300A ETX-5300A G.8032 Ring ETX-220 ETX-220 ETX-220 ETX-220 G.8032 Ring ETX ETX ETX ETX ETX ETX ETX ETX ETX ETX ETX ETX RNC/aGW MBO BSC BSC Ch-STM1

  33. Business Services Main Features • Services • E-Line, E-LAN (TE, non-TE), • Legacy services support (TDM, clock synchronization edge-to-edge) • High Availability & Reliability • Service always on – Service Restoration, protection in sub 50 mSec recovery • In Service Software Upgrade - ISSU • Serviceability & manageability • Point & click provision, assure, validate & report customers SLA using RAD Service Delivery Platform • Hard QoS and variety of classifiers/policer • Differentiate customers SLA • Assured in all levels: carrier network, customer service

  34. Mobile Backhaul Traffic Dimensions ETX ETX ETX ETX ETX ETX-5300A 10 GbE NTU Wholesale Carrier Mobile Concentrator • Backhaul Dimensions: • Mobile Carrier assign 200 - 400 NBs to concentrator • Each NBs has between 4 – 8 CoS flows • At least 2 flows from each NB are classified as mission critical and should be monitored RNC/aGW Router End to End TM, Y.1731 & 802.1ag • The Math: • The required flows : 800 – 3200 flows • The Required Policers/Shapers: 800 - 1600 • The Required OAM sessions: 400 - 800

  35. Mobile Backhaul Timing Aspects ETX ETX ETX ETX ETX Stratum 1 clock source or GPS ETX-5300A 10 GbE NTU RNC/aGW Router Wholesale Carrier Mobile Concentrator Timing over packet ETX-5300A Grand master

  36. Mobile Backhaul – Main Features • Optimized for Radio Access Network (RAN) aggregation and transport to deliver ideal migration solution enabling fixed and mobile converged network • High density & number of GE ports for a space restricted (3RU) • Supports of legacy 2G TDM services over Ethernet services • Supports major synchronization standards, including IEEE 1588-2008 M,S & TC & G.8261 in a variety of synchronization interfaces • Scalable in-service 4 + 4 10GbE & 20 to 80GbE of Ethernet • Broadband service support, including MEF 9, 14, 22 • Scalable TDM service 16 Ch. STM-1/OC-3 switching • Carrier-grade availability and reliability

  37. Why Choose the ETX-5300A A Little Box of Big Magic: • Amplifies service capabilities, lowers TCO • Multi-functional device for converged network infrastructure • Support critical applications and legacy services • Ensure end-to-end SLA over multiple provider networks

  38. ETX-5300A Value Proposition • 3U size Access Aggregation Switch • Optimized device to aggregate smart termination units like any ETX-2xxA • The ETX-5300A reduce various of interfaces into a single 10 GbE port • Provides reach layer 2 application for business and mobile services • Enables superior timing conversions and terminations • Easy integration when it comes with ETX-2xx • Similar knowhow as for the ETX-2xxA • Future proof investment, that take advantage of technological innovations and new service possibilities as they develop

More Related