1 / 13

Brian Finan 09548734 Final Year Project Presentation Supervisor: Prof. Ger Hurley

Brian Finan 09548734 Final Year Project Presentation Supervisor: Prof. Ger Hurley Co Supervisor: Mr. Liam Kilmartin. Title of project Purpose of Maximum Power Point Tracking Connection of S olar Arrays Different methods of MPPT Perturb and Observe method

sinjin
Télécharger la présentation

Brian Finan 09548734 Final Year Project Presentation Supervisor: Prof. Ger Hurley

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Brian Finan09548734Final Year Project Presentation Supervisor: Prof.Ger Hurley Co Supervisor: Mr. Liam Kilmartin

  2. Title of project • Purpose of Maximum Power Point Tracking • Connection of Solar Arrays • Different methods of MPPT • Perturb and Observe method • Reasons for using the P&O method • Limitations of the P&O method • What the completed project will contain • Microcontroller being used to implement the algorithm • Work to be carried out Overview

  3. Maximum Power Point Tracking (MPPT) for Solar Power Applications with Partial Shading Keeping a solar array in the correct position so it will receive the maximum amount of solar irradiance available to produce the maximum possible power. Title of Project

  4. The ‘knee’ of the curve is the most sought after position. Purpose of Maximum Power Point Tracking

  5. Each solar cell has a current of 3 amps and a voltage of 6 volts Connection of Solar Arrays

  6. Perturb and Observe Method Observes the array output power and determining the next action, either increasing or decreasing the array operation voltage, this is discussed in greater detail in the next slide. • Incremental Conductance Method Adjusts terminal voltage according to the maximum power point voltage by measuring changes in array current and voltage and predicting the effects of a voltage change. Different methods of MPPT

  7. Perturb and Observe method

  8. Very simple and easy to implement. • Most commonly used so information is widely available. • Provides predictive and accurate solutions to maximum power point tracking under partially shaded conditions. Reasons for using the P&O Method

  9. Power obtained oscillates just below the Maximum Power Point in steady state operation. • Under rapidly varying irradiance & load conditions the system can track in the wrong direction. • The size of the change in operation voltage chosen determines the speed & convergence of the Maximum Power Point and the range of oscillation. Limitations of P&O Method

  10. What the completed project will contain

  11. Inexpensive, most Arduino starter kits cost between €50-70. • The Arduino will work on Windows, Mac and Linux. • Simple clear and open source programming environment. Microcontroller being used to implement the Algorithm

  12. Write required code to program the Arduino microcontroller • Build the project and test it using solar cell simulator • Create PSPICE simulation models of the circuits required • Complete the required web page, poster and final report Work to be carried out

  13. Questions??

More Related