1 / 9

Project #6 Surface Modification of Carbon Nanotubes for Property Improvement

Project #6 Surface Modification of Carbon Nanotubes for Property Improvement. Sponsored ByThe National Science Foundation Grant ID No.: DUE-0756921. Cuong Diep – pre-junior, Chemical Engineering Milena Fernandez – pre-junior, Computer Engineering

sluby
Télécharger la présentation

Project #6 Surface Modification of Carbon Nanotubes for Property Improvement

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Project #6Surface Modification of Carbon Nanotubes for Property Improvement • Sponsored ByThe National Science Foundation Grant ID No.: DUE-0756921 Cuong Diep – pre-junior, Chemical Engineering Milena Fernandez – pre-junior, Computer Engineering College of Engineering and Applied Science; University of Cincinnati; Cincinnati, Ohio Dr. Vesselin Shanov- Chemical and Materials Engineering, CEAS Dr. Noe Alvarez- Chemical and Materials Engineering, CEAS

  2. Goals • To design a transformer using CNT threads Objectives Design transformer Modify CNT threads by the processes of doping and coating. Replace Cu wires by CNT threads Using a battery, light up LEDs CNT- Carbon nanotubes Cu- Copper LED- light-emitting diode, used as a light source  Transformer- electrical device

  3. Final Product Battery connected to primary coil LED connected to secondary coil CNT threads will replace coils Source: Energy Efficiency Transformer

  4. Tasks • Learn how a transformer works • Understand properties of CNTs • Learn process of doping and coating CNT threads • Choose ideal transformer design • Wrap CNT threads on transformer • Connect battery and LED to CNT threads • Light up LED!

  5. Materials • Carbon Nanotube threads • Nitric Acid • Sulfuric Acid.

  6. Figure 1: Diameter Measurement for AP48, 4.25 M HNO3 Nitric Acid sample 6

  7. Methods Doping • Soaking • 4-Probes Results Resistivity • Lowers through doping

  8. Timeline • Week 1-2: Research topic and related material • Week 3-6: Attend seminars, run experiments, collect data • Week 7-9: Analyze test results, conclude results • Week 10-11: Finish up final deliverables: Final PowerPoint Presentation, Final Technical Paper, Final Poster and NSF Summary Report.

  9. ?

More Related