1 / 14

Radio-over-fibre transmission of multi-carrier 64-QAM radio signal at 18 GHz

Radio-over-fibre transmission of multi-carrier 64-QAM radio signal at 18 GHz. Hejie Yang , Maria Garcia Larrode, Gert-Jan Rijckenberg, Eduward Tangdiongga and A.M.J. Koonen Electro-optics communication group COBRA Institute Eindhoven University of Technology. Higher radio frequency .

taline
Télécharger la présentation

Radio-over-fibre transmission of multi-carrier 64-QAM radio signal at 18 GHz

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Radio-over-fibre transmission of multi-carrier 64-QAM radio signal at 18 GHz Hejie Yang, Maria Garcia Larrode, Gert-Jan Rijckenberg, Eduward Tangdiongga and A.M.J. Koonen Electro-optics communication group COBRA Institute Eindhoven University of Technology Hejie Yang – BroadBand Europe, Dec, 2007

  2. Higher radio frequency Smaller cell size More antenna, even more expensive! Motivation: Why radio-over-fibre? Current problem? Growing traffic volume Hejie Yang – BroadBand Europe, Dec, 2007

  3. Motivation: Why radio-over-fibre? Future wireless access network employing radio-over-fibre techniques in home: Move radio processing to the central office, simplify the radio access unit (RAU) Central office: possible to process multi-standard signal, and support multiple RAUs Hejie Yang – BroadBand Europe, Dec, 2007

  4. Outline: • Motivation: Why radio-over-fibre? • Introduction to radio-over-fibre (RoF) techniques • RoF system using optical frequency multiplication (OFM) • Transmission of multi-carrier signal using OFM • Conclusion Hejie Yang – BroadBand Europe, Dec, 2007

  5. Introduction to radio-over-fibre (RoF) techniques Required services: GSM (900/1800 MHz), UMTS (2 GHz), WiFi (2.4 GHz), WiMAX (10-66 GHz), UWB (3.6-10 GHz), etc … • RoF transmission techniques: • Direct modulation of Laser source (simple, cost-low, low-frequency) • Heterodyning two optical signals to generate microwave signal (high frequency, phase locking needed, complex) • Frequency up-conversion by operating Mach-Zehnder modulator at null-point. (require high frequency electronics) Proposed optical frequency multiplication (OFM): dispersion-tolerant, low-cost and effective (no LO, no high frequency electronics) Hejie Yang – BroadBand Europe, Dec, 2007

  6. RoF system using OFM • - flexible when choosing output RF frequency  multi-standard system • low frequency electronics  low-cost solution • very pure RF carrier (<100 Hz)  good performance • dispersion tolerant where n is the order of harmonics generated by frequency sweeping Hejie Yang – BroadBand Europe, Dec, 2007

  7. Outline: • Motivation: Why radio-over-fibre? • Introduction to radio-over-fibre (RoF) • RoF system using optical frequency multiplication (OFM) • Transmission of multi-carrier signal using OFM • Conclusion Hejie Yang – BroadBand Europe, Dec, 2007

  8. e.g. WiMAX standard, OFDM and OFDMA with up to 2048 sub-carriers, 100 Mbit/s and beyond 10 GHz… P f Over 4.4 km MMF, different number of sub-carriers are investigated, each sub-carrier is modulated by 64-QAM. (silica 50um, GI-MMF) Transmission of multi-carrier signal using OFM (1) • Trends of wireless access network: • high frequency • high data rate • - multi-carrier format Hejie Yang – BroadBand Europe, Dec, 2007

  9. Transmission of multi-carrier signal using OFM (2) For a fixed total symbol rate (18 and 9 MS/s), number of carriers varies from 1, 3, 5, 10 Total bit rate can achieved 108 Mbit/s with EVM value below 3.4 % better performance compared with single carrier, due to decreased symbol rate per carrier EVM: error vector magnitude, smaller EVM corresponds to larger SNR Hejie Yang – BroadBand Europe, Dec, 2007

  10. Transmission of multi-carrier signal using OFM (3) For a fixed total symbol rate 18 MS/s: a trade-off between number of carriers and symbol rate per carrier can be observed total symbol rate (18 MS/s) = number of carriers x symbol rate per carrier Hejie Yang – BroadBand Europe, Dec, 2007

  11. Transmission of multi-carrier signal using OFM (4) For the same NC: increasing of SR  larger EVM. (because of the wider spectral bandwidth) For the same SR: increasing of NC  larger EVM (because of more cross-talk interference between carriers) (dispersion robust..) Hejie Yang – BroadBand Europe, Dec, 2007

  12. System performance doesn’t depend on number of carriers in this case Transmission of multi-carrier signal using OFM (5) EVM versus totalsymbol rate, for different number of carriers approx. linear relation 210 Mbit/s achieved when EVM < 6% (7.94% for 64-QAM in WiFi standard) Hejie Yang – BroadBand Europe, Dec, 2007

  13. Conclusion • feasibility of transmitting multi-carrier 64-QAM signal at 18.3 GHz over 4.4 km MMF has been demonstrated • more than 210 Mbit/s QAM data is transmitted while keeping the EVM value within the standard range (<6%) • trade-off between number of carrier and symbol rate per carrier • system performance does not depend on number of carriers, if the total symbol rate is investigated, therefore give rise to more possibilities of system design. Hejie Yang – BroadBand Europe, Dec, 2007

  14. Q & A … Thank you for your attention! Acknowledge for MUSE projectand IOP GenCom! Hejie Yang – BroadBand Europe, Dec, 2007

More Related