1 / 18

Diode-Pumped Solid-State Laser for Teaching Applications

Diode-Pumped Solid-State Laser for Teaching Applications. Aric Lin ECE445 Senior Design. Introduction. Addresses a need for updated teaching equipment for the ECE496 optics laboratory. Provides a modular laser system for the teaching of laser alignment and characterization.

tamas
Télécharger la présentation

Diode-Pumped Solid-State Laser for Teaching Applications

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Diode-Pumped Solid-State Laser for Teaching Applications Aric Lin ECE445 Senior Design

  2. Introduction • Addresses a need for updated teaching equipment for the ECE496 optics laboratory. • Provides a modular laser system for the teaching of laser alignment and characterization.

  3. Features/Requirements • Modular design. Components are easily manipulated or replaced. • Ease of use. Designed for beginning ECE496 lab students - alignment should be relatively simple. • Output Specifications: • Output power > 50% manufacturer spec • Lasing wavelength within 1% of manufacturer spec

  4. Hardware Overview • Laser components: • Pump: IR laser diode • Gain Medium: Laser crystal • Cavity: Mirrored surfaces • Optics required for beam correction Pump Gain medium Output Cavity

  5. Laser Crystal • Nd:YO4 crystal + KTP (Potassium-Titanyl-Phosphate) frequency-doubler. • Nd:YO4 is pumped at 808nm, lases at 1064nm, which is halved by the KTP to 532nm – green light. Figure from CASIX, Inc. website: http://www.casix.com

  6. Laser Crystal - Specifications • Reflective coatings: • Incident surface: • R<5% @ 808nm • R>99.8% @ 1064nm • R>99.8% @ 532nm • Output surface • R>99.8% @ 808nm • R>99.8% @ 1064nm • R<5% @ 532nm • Overall dimensions: 1mm x 1.5mm x 2.5mm Figure from CASIX, Inc. website: http://www.casix.com

  7. Crystal Mount • GRIN (Gradient Index) lens holder fixed to a tilt/rotation table mount • Translation stage unnecessary –added degree of complexity in alignment • Tilt alignment generally unnecessary. Can be used to fine-tune crystal alignment to maximize output power. Screw clamp GRIN holder Tilt table

  8. Pump Diode TE Plate • 808nm AlGaAs edge-emitter. • Driven by generic power supply. • Threshold current ~300mA • Thermoelectric cooler w/ ILX temperature controller Heat Sink Laser Diode

  9. Optics • Collimating lens. Lowers beam divergence from ~(45°,5°) to ~(5°,1°). • Focusing lens (focal length ~1cm) • Anamorphic Prism Pair (discarded) • All optics mounted on translation stages – primary means of alignment

  10. Threshold ~330mA @1.7V

  11. Slope efficiency ~28.5%

  12. Threshold ~530mA @1.8V

  13. Slope efficiency ~5.3%

  14. Slope efficiency ~0.9%

  15. Other Characteristics • Pump • Lasing wavelength = 808nm ±0.8nm • FWHM ~4.1nm • Beam divergence = (44.2°, 5.1°)→(5.7°,1.4°) • Crystal • Lasing wavelength = 532nm ±0.3nm • FWHM ~2.8nm • Beam divergence = (0.6°,0.5°)

  16. The Nutshell • DPSS laser in 4 parts: pump, collimating lens, focusing lens, and crystal. • Output power ~70% of manufacturer spec near 200mW of pump power • Lasing wavelength within 0.1% of manufacturer spec • Alignment consists of two translation stages and a tilt stage, if necessary.

  17. Credits • Dr. Peter D. Dragic • Mr. Chad Carlson

  18. Thank You

More Related