1 / 11

Slohvac: An HVAC Savvy Sloan?

Slohvac: An HVAC Savvy Sloan?. Nick Gayeski 4.427J – HVAC L. Glicksman, L. Norford. Outline. Building Design Building Basics Solar Shading Building Envelope Heating and Cooling Loads HVAC System Design Displacement Ventilation Natural Ventilation. S. Building Basics.

tamera
Télécharger la présentation

Slohvac: An HVAC Savvy Sloan?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Slohvac: An HVAC Savvy Sloan? Nick Gayeski 4.427J – HVAC L. Glicksman, L. Norford

  2. Outline • Building Design • Building Basics • Solar Shading • Building Envelope • Heating and Cooling Loads • HVAC System Design • Displacement Ventilation • Natural Ventilation

  3. S Building Basics • Faculty Clusters in Corner Buildings, Classrooms/Large Conference Rooms in Central Buildings • 230,000 GSF roughly satisfies Sloan and E60 space requirements • Long East-West Axis and Shading Minimize Direct Solar Gains • Atrium Provides Diffuse Daylight • Buoyancy-driven natural ventilation supplemented by wind-driven ventilation and solar chimneys 50’ 100’ S River

  4. 5’ 9’ Altitude > 58° Solar Shading 4.6’ 3’ 26.5° tilt Azimuth > 100° • South Overhang • Blocks Direct Sun from 10 to 2 solar time in mid-summer • East and West Shading • Block Direct Sun after 9 (East) and before 4 (West) solar time in mid-summer

  5. Building Envelope Windows – Optimize Based on Orientation • Double-Skin Outside Vented Facade on East and West Reduce Solar Gains • Double-Pane, Argon Filled Windows Used Throughout • Low-e Windows on North Façade • Clear Windows on South Façade Walls – High Thermal Mass and Insulation • 6” Concrete • 8 cm of EPS Insulation • Gypsum Board

  6. 3rd Floor Design Heating and Cooling Cooling Design • Consumes 3,155 kWh on Peak Summer Day • Peak Load ~ 218 kW at 2 pm Heating Design • Consumes 3,150 kWh on Peak Winter Day • Peak Load ~ 182 kW at 10 am Both ~ 286 kWh/m^2-yr for 365 Consecutive Peak Days Peak Flow Rates • Summer at 2 pm - 23.5 m^3/s or 50,000 cfm • Winter at 10 am - 25.2 m^3/s or 53,500 cfm

  7. Mixed-Mode System Mode 1: Buoyancy and Wind-Driven Natural Ventilation Mode 2: Displacement Ventilation Return Office Circulation/Support Office Supply S North-South Cross Section

  8. Return Exhaust Outdoor Air F HC CC Supply Steam HWS DM DM SP HWR Condensate Converter CWS Zone T CWR VAV, All-Air Displacement Ventilation Uses campus steam and chilled water.

  9. Natural Ventilation Season Heating required for T < 8°C Cooling required for T > 22° • May, June, September, October • Some of April, July, August and November • Accounting for Buoyancy Only! • Season Could be Extended: • Wind-driven ventilation • Use for Night-Cooling

  10. Conclusions Benefits • Natural Ventilation Possible ~ 1/3 of the Year or More • Even at Peak Load, Building Performs Better than 300 kWh/m^2-yr • Atrium Provides Daylighting and Enjoyable Semi-Outdoor Space • Underfloor Distribution Used In Both Ventilation Modes Drawbacks • High Volumetric Flow Rates – Ducts Take up Space • Thermal Mass Outside of Insulation • More Reduction of Solar Gains Possible, Though May Sacrifice Daylighting • More Consideration May be Needed for HVAC Systems on Floors 5-10 (If Buoyancy is Not Enough)

  11. Thank you.Questions? Suggestions?

More Related