1 / 19

THE POTENTIAL APPLICATIONS OF ALUMINOSILICATES FOR METALS REMOVAL FROM WATER

Technical University of Czestochowa Institute of Environmental Engineering Czestochowa, Poland. THE POTENTIAL APPLICATIONS OF ALUMINOSILICATES FOR METALS REMOVAL FROM WATER. M agdalena Zabochnicka-Świątek. Heavy metal pollution . TOXICITY human health living resources

tamma
Télécharger la présentation

THE POTENTIAL APPLICATIONS OF ALUMINOSILICATES FOR METALS REMOVAL FROM WATER

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Technical University of Czestochowa Institute of Environmental Engineering Czestochowa, Poland THE POTENTIAL APPLICATIONS OF ALUMINOSILICATES FOR METALS REMOVALFROM WATER Magdalena Zabochnicka-Świątek

  2. Heavy metal pollution TOXICITY • human health • living resources • ecological systems

  3. HEAVY METALS IN THE ENVIRONMENT 1. ARSENIC (As) • controlled by adsorption (iron and manganese oxides) and precipitation 2. COPPER (Cu) • adsorption and ion exchange (inorganic and organic materials)

  4. HEAVY METALS IN THE ENVIRONMENT 3.LEAD (Pb) • may be immobilized by adsorption (organic matter), ion exchange (hydrous oxides) or by chelation (humic or fulvic acids) 4. NICKEL (Ni) • Adsorption (organic matter), ion exchange, chelation, precipitation and coprecipitation (hydrous iron and manganese oxides)

  5. Aluminosilicates Aluminium (Al) Silicon (Si) Oxygen (O) • many naturally occurring aluminosilicates • hydrated aluminosilicate minerals – zeolites

  6. The most important properties of zeolites • adsorption ability for a number of compounds (metal-ions, vapours and gases) • high chemical-, temperature- (500 - 10000C) and radiation stability • low density and large void volume of dehydrated samples (900 m2/g) • reversible water absorption - 1 do 25%

  7. Schematic structure of natural zeolite - TETRAHEDRON The cells:POLYHEDRONS inside of which there are voids of different sizes dependent on the zeolite type A- 0.4 nm i type X- 0.9 nm sodalite faujasite

  8. Zeolites CATION EXCHANGE • The size and shape of intrinsic canals determines which cations and molecules can enter or remain outside the crystal structure. ADSORPTION CAPACITY • Cations present in the canals in the zeolite structure readily undergo the process of exchange (exchangeable cations). Ions of heavy metals can be replaced with Na, Ca, Mg and K.

  9. Cation Exchange Capacity Differences: • particle density • cation selectivity • molecular pore size

  10. Heulandite Analcime Gmelinite Mordenite Chabazite

  11. Clinoptilolite • adsorption capacity • ion exchange selectivity • molecular-sieves ability • catalytic properties • high thermal stability (Na, K, Ca)4Al6Si30O72•24H2O

  12. Clinoptilolite • Modifications: physical and chemical methods - increases the content in a single cation = homoionic form • Regeneration: would enable the recovery of both the sorbent and metal • Sythetic zeolites: controlled and known physico-chemical properties 0,125 mm

  13. The maximum values of ion exchange capacity for clinoptilolite

  14. Arsenic removal from water Studies on both non-activated and activated zeolites, as well as on zeolites hydrogenated or modified with iron: • sorption of arsenic takes place more slowly on zeolites in comparison to ferrihydrite • removal of arsenite by some of the iron-modified zeolites is comparable with the amount removed by iron

  15. Competition processes influence the selectivity series Natural: Pb2+ > Cd2+ > Zn2+ ≥ Cu2+ > Ni2+ > Hg2+ Pb2+> Fe2+> Cr2+ ≥ Cu2+ Pb2+> Cu2+> Cd2+> Ni2+ Synthetic: Pb2+ > Cd2+ > Cu2+ > Ni2+

  16. The process has three stages • Fast adsorption on the zeolite microcrystal surfaces. • The inversion stage: short-time prevalence of the desorption process connected with the diffusion flow from the clinoptilolite microcrystal’s interior. • The moderate adsorption in the microcrystal’s interior.

  17. The application of zeolites provide an economical means of removing mixed heavy metals from water. Each metal has a tendency to form specific compounds in water and they can be removed by different mechanisms – adsorption or/and ion exchange. The removal of heavy metals from water because of their toxic effects on living species is extremely important. 3 2 1 Conclusions

  18. The differences in the ion exchange selectivity of clinoptilolite are probably caused by competition processes. Sorption of arsenic on zeolites requires further research. Modifications of clinoptilolite enhance its ion exchange ability by optimising the selectivity and sorption efficiency. Clinoptilolite may be used, as a low-cost, nontoxic and abundant source, for the removal of heavy metals from water. 5 4 6 7

  19. Thank you very much for your attention Magdalena ZABOCHNICKA-ŚWIĄTEK

More Related