1 / 13

Section 5: Thin Film Deposition Part 2: Chemical Methods

Section 5: Thin Film Deposition Part 2: Chemical Methods. Jaeger Chapter 6. Chemical Vapor Deposition (CVD). source. chemical reaction. film. substrate. More conformal deposition vs. PVD. t. t. Shown here is 100% conformal deposition. step. LPCVD Examples. LPCVD Examples.

tanner
Télécharger la présentation

Section 5: Thin Film Deposition Part 2: Chemical Methods

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Section 5: Thin Film DepositionPart 2: Chemical Methods Jaeger Chapter 6 EE143 – Ali Javey

  2. Chemical Vapor Deposition (CVD) source chemical reaction film substrate More conformal deposition vs. PVD t t Shown here is 100% conformal deposition step EE143 – Ali Javey

  3. LPCVD Examples EE143 – Ali Javey

  4. LPCVD Examples EE143 – Ali Javey

  5. reactant 5 stagnant gas layer 1 surface diffusion 2 3 4 substrate CVD Mechanisms 1 = Diffusion of reactant to surface 2 = Absorption of reactant to surface 3 = Chemical reaction 4 = Desorption of gas by-products 5 = Outdiffusion of by-product gas EE143 – Ali Javey

  6. CVD Deposition Rate [Grove Model] film Si F1 F3 d d = thickness of stagnant layer = F D [ CG - CS] / d 1 = F kS CS 3 EE143 – Ali Javey

  7. Grove model of CVD (cont’d) EE143 – Ali Javey

  8. Deposition Rate versus Temp gas transport limited [log scale] Rate surface-reaction limited 0 1/T high T low T EE143 – Ali Javey

  9. Growth Rate Dependence on Flow Velocity EE143 – Ali Javey

  10. LPCVD Features (1) More conformal deposition, if T is uniform (2) Inter-wafer and intra-wafer thickness uniformity less sensitive to gas flow patterns. (i.e. wafer placement). Wafer topography EE143 – Ali Javey

  11. Comments about LPCVD (1) Sensitivity to gas flow pattern Furnace tube wafers (2) Mass depletion problem more less in out EE143 – Ali Javey

  12. Plasma Enhanced CVD • Ionized chemical species allows a lower process temperature to be used. • Film properties (e.g. mechanical stress) can be tailored • by controllable ion bombardment with substrate bias voltage. EE143 – Ali Javey

  13. Atomic Layer Deposition • The process involves two self-limiting half reactions that are repeated in cycles • Unlike CVD, in ALD pulses of precursors are introduced in each cycle • ALD is highly conformal and enables excellent thickness uniformity and control down to nm-scale EE143 – Ali Javey

More Related