1 / 17

CHEMISTRY

CHEMISTRY. IT’S A GAS!! Chapter 13. Units of Pressure. 1atm = 101.3 kPa = 760 torr = 760 mm Hg = 14.7 psi Measured with a barometer or manometer to measure pressure less than atmospheric. Assumptions About Properties of Gases – Kinetic Theory p.475-477.

tarak
Télécharger la présentation

CHEMISTRY

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CHEMISTRY IT’S A GAS!! Chapter 13

  2. Units of Pressure • 1atm = 101.3 kPa = 760 torr = 760 mm Hg = 14.7 psi • Measured with a barometer • or manometer to measure pressure less than atmospheric

  3. Assumptions About Properties of Gases – Kinetic Theory p.475-477 • Small particles with lots of space between-insignificant volume • Compressible • High kinetic energy – random motion and straight paths • Elastic collisions • No attractive or repulsive forces between particles You know what they say about assuming!! More on that later. 

  4. Variables That Describe Gases • Pressure (P) – kPa, atm, Torr, mm Hg, psi, bars or mbars • Volume (V)– liters • Temperature (T)– Kelvin scale • Moles (n) – number of moles

  5. Gas Laws • Allow us to predict behavior of gases under specific conditions. • Help us understand everyday applications of gases • Why do we have to check air pressure in tires? • Why did my balloon shrink in the cold? • Why does warm soda fizz so much?

  6. Factors Affecting Gas Pressure • Amount of gas – number of particles/moles • Volume – space gas takes up • Temperature – increases or decreases kinetic energy of particles resulting in more or fewer collisions

  7. Boyle’s Law p.447 • Describes pressure-volume relationship of gases at constant temperature • States that for a given mass of gas, as pressure increases, volume decreases and vice versa • What kind of relationship is this? • How can it be expressed mathematically? • P1V1 = P2V2

  8. Charles’ Law p.451 • Describes the relationship between volume and temperature at constant pressure. • States that for a fixed mass of gas, as temperature increases, volume increases • What kind of relationship is this? • How can this be expressed mathematically? • V1/T1 = V2/T2

  9. Gay-Lussac’s Law • Describes relationship between temperature and pressure with constant volume • States that the pressure of a gas will increase with increased temperature and vice versa • What kind of relationship is this? • How can it be expressed mathematically? • P1/T1 = P2/T2

  10. Combined Gas Law p. 464 • Combines Boyle’s, Charles’ and Gay-Lussac • Allows for calculations where none of the variables is constant • P1V1/T1 = P2V2/T2

  11. Avogadro’s Hypothesis (Law) p.455 • Equal volumes of gases at the same temperature and pressure contain equal numbers of particles • Gases at constant pressure and temperature have volume that is directly proportional to number of moles. • V1/n1 = V2/n2 • One mole (6.02 x 1023 particles) of any gas at STP occupies a volume of 22.4 L

  12. Ideal Gas Law p.458 • Incorporates the fourth variable of gases – number of moles • When “n” is included in combined gas law a constant is recognized and symbolized as “R” with value of 0.08206 Latm/Kmol • “R” is known as the ideal gas constant • New mathematical expression PV=nRT

  13. Ideal Gas p.458 • One that follows all gas laws at all conditions of pressure and temperature • No such gas – however, real gases behave as ideal gases under most conditions of pressure and temperature • Real gases can be liquefied and sometimes solidified – ideal gases cannot

  14. Real vs Ideal p.478 • Kinetic theory assumptions – no attraction among particles and no volume • Assumptions are incorrect! • If true, would not be able to liquefy or solidify gases • Gases definitely have volume

  15. Dalton’s Law of Partial Pressuresp. 464 • States at constant volume and temperature the total pressure exerted by a mixture of gases is equal to the sum of the partial pressures • Expressed mathematically P1 + P2 + P3…= Ptotal

  16. Graham’s Law • Describes diffusion and effusion of gas molecules • States that rate of effusion is inversely proportional to the square root of the gases’ molar masses • Also found to be true for diffusion of gases • Simply put, means small gas molecules move faster than heavier gas molecules • Can be expressed mathematically

More Related