html5-img
1 / 26

ARPA-SIM, Bologna, Italy and CIMA , Savona, Italy.

Improving the radar data mosaicking procedure by means of a quality descriptor. Fornasiero, A., Alberoni, P.P., Amorati, R., Marsigli, C. ARPA-SIM, Bologna, Italy and CIMA , Savona, Italy. 1. the story began two years ago. Quality Descriptor (ERAD, 2004).  [0, 1].

terah
Télécharger la présentation

ARPA-SIM, Bologna, Italy and CIMA , Savona, Italy.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Improving the radar data mosaicking procedure by means of a quality descriptor Fornasiero, A., Alberoni, P.P., Amorati, R., Marsigli, C. ARPA-SIM, Bologna, Italy and CIMA , Savona, Italy. 1

  2. the story began two years ago...

  3. Quality Descriptor (ERAD, 2004)  [0, 1] Qd= quality before correction Qc = quality of the correction errfract > 0 errfract < 0 Fornasiero A. et al, 2005 : Effects of propagation conditions on radar beam-ground interaction: impact on data quality, ADGEO Fornasiero A., 2006 : On the uncertainty and quality of radar data, PhD thesis.

  4. Issues • definition and testing of radar data composition methods taking into account data quality • verification of quality definition consistency with data reliability

  5. The compared methods Short pulse areas QUALITY-BASED APPROACHES • MAX_Q: maximum quality • AVE_Q: quality-weighted average CLASSIC APPROACHES: • MAX_Z: maximum reflectivity • MIN_DIST: minimum distance • AVE_DIST: r-2 weighted average San Pietro Capofiume Gattatico

  6. 24-05-06 14.30 gat reflectivity 24-05-06 14.30 spc reflectivity 24-05-06 14.30 gat quality 24-05-06 14.30 spc quality Case study – 24 May 2006

  7. 24-05-06 14.30 gat-spc reflectivity 24-05-06 14.30 gat-spc reflectivity 24-05-06 14.30 gat-spc reflectivity MAX_Z MAX_Q AVE_Q 24-05-06 14.30 gat-spc weight 24-05-06 14.30 gat-spc weight 24-05-06 14.30 gat-spc weight is the distance effect dominant?

  8. Scores – tp (10 h) om=1.76 mm

  9. Case study – 03-04 August 2006 03-08-06 13.15 gat reflectivity 03-08-06 13.15 spc reflectivity 03-08-06 13.15 gat quality 03-08-06 13.15 spc quality

  10. MAX_Z MAX_Q AVE_Q 03-08-06 13.15 gat-spc weight 03-08-06 13.15 gat-spc weight 03-08-06 13.15 gat-spc weight attenuation effect is of crucial importance 03-08-06 13.15 gat-spc reflectivity 03-08-06 13.15 gat-spc reflectivity 03-08-06 13.15 gat-spc reflectivity

  11. Scores – tp (18 h) om=11.9 mm

  12. Concluding.. • Quality information improves precipitation estimate in radar compositsin convective cases, respect to traditional composition methods • The wider is the spectrum of error sources enclosed within the quality descriptor, the more accurate is the composed precipitation field, even if some errors are not corrected • AVE_Q is preferable with respect to other method especially when there is a lack of informations in Q • The distance-based methods seem to be preferable respect to MAX_Z • It is necessary to test the method in stratiform cases, after inserting VPR-related quality component into the Q function

  13. Thank you for the attention

  14. Appendix Addition of Q comp. Data correction Radar data resampling Data comparison Quality components Radar precipitation verification

  15. Data Correction • Doppler filter • Choice of the minimum elevation that is not affected by clutter and with a beam blocking rate lower than 50% • Topographical beam blocking correction, based on a geometric optics approach • Anomalous propagation clutter suppression Fornasiero, A. , Bech, J., and Alberoni, P. P. Enhanced radar precipitation estimates using a combined clutter and beam blockage correction technique. pp 697-710. SRef-ID: 1684-9981/nhess/2006-6-697

  16. Radar data resampling az_min az az_max 250 m

  17. 1 KM 1 KM 1 2 3 2 5 6 4 5 6 4 7 8 9 Data comparison • radar data are resampled in a 1kmx1km grid • the observation is compared with the nearest radar measure • the precipitation is accumulated from the beginning to the end of the event • raingauges sampling interval=30 min. • only raingauges with the complete dataset (nmeasures=nhours*2) are considered • radar cumulated rain in 1 hour is calculated as weighted average of min 3, max 5 measures

  18. Quality components (1/3) CLUTTER Qd = 0 if clutter is present from VCT Qc = 0.5  Q* = 0.5 Qd =0.8 if the test is not applied BEAM BLOCKING Qd = f(BB)= 1-(BB/BBmax)1/1.5withBBMAX=50% Qc = f(BB)*f(qerr)*f(Dtrs)*f(Drrs) f(qerr)= 1- qerr1/1.5pointing error f(Dtrs)= e-Dtrs/DTtime distance from radios.DT= 4 h f(Drrs)= e-Drrs/DR space distance from radios.DR= 50 KM derived from Bech et al., 2003

  19. Quality components (2/3) Qd= e -br DISTANCE clima from Koistinen and Puhakka, 1981 adj-factor clima = r/g=1-errfraz è  e -br FOCALIZATION/DIVERGENCE ERROR Qd = 1 – (DVol/Vol)1/1.5 DVol= volume variation respect to standard propagation

  20. Quality components (3/3) ATTENUATION Qd = 1 – (ATTENUATION RATE)1/1.5 Burrows and Attwood, 1949 l=5cm, T=18°C

  21. Radar precipitation verification (1/2) ... is conducted as verification of categorical forecasts of discrete predictands Categorical: only one set of possible events occurs Discrete predictand: takes only one of a finite set of possible values

  22. raingauges obs > thr radar obs > thr “forecast”

More Related