1 / 6

Dimensioning Pt. 2

Dimensioning Pt. 2. Drawing Scale. A scale is a proportional representation of an object. The scale of a drawing should be near the title If there are multiple views with different scales, the scale should be placed as close to the view as possible

toyah
Télécharger la présentation

Dimensioning Pt. 2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Dimensioning Pt. 2

  2. Drawing Scale • A scale is a proportional representation of an object. • The scale of a drawing should be near the title • If there are multiple views with different scales, the scale should be placed as close to the view as possible • Scale can be given as 1:1, 1:2, and so on for objects that are being scaled down • Scale can be given as 2:1, 4:1, and so on to show objects that are scaled up

  3. Finish Mark • A surface texture symbol that shows a surface is to be machined or finished

  4. Datums • Datums are points, lines, and surfaces that are assumed to be exact.

  5. Dimensioning rounds, fillets, and frustums • Rounds and fillets are dimensioned using a radius (R) • Frustums (truncated cone) can be dimensioned using two dimension lines in a single view

  6. Chamfers, Tapers, an Curves • Chamfers are angled corners or bevels and are dimensioned using the degree and distance of the corner • Tapers can be dimensioned by giving the length, one diameter, and the taper as a ratio • Curves is made up of arcs and is dimensioned by the radii that have centers located by points of tangency

More Related