1 / 13

CCl 4 Sorption and Degradation on Fe-oxide surfaces

2 Electrical Engineering. 1 Chemistry. 3 Environmental Engineering. 4 EMSL @ PNNL. CCl 4 Sorption and Degradation on Fe-oxide surfaces. Jeff Fitts, Kwang Rim 1 , George Flynn 1 , Kaveh Adib 2 , Nick Camillone III 2 , Richard Osgood 2 , Peter Schlosser 3 , Steve Joyce 4.

travis
Télécharger la présentation

CCl 4 Sorption and Degradation on Fe-oxide surfaces

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 2Electrical Engineering 1Chemistry 3Environmental Engineering 4EMSL @ PNNL CCl4 Sorption and Degradation on Fe-oxide surfaces Jeff Fitts, Kwang Rim1, George Flynn1, Kaveh Adib2, Nick Camillone III2, Richard Osgood2, Peter Schlosser3, Steve Joyce4 Environmental Molecular Sciences Institute Columbia University, New York, NY

  2. C-Cl + MeOsurf = MeCl + CO Organochlorine compounds: PCBs, DDT, CCl4... • Extensive point source contamination and elevated global background levels. • Compounds are hormonally active, toxic and carcinogenic. • High levels observed in human tissue, blood and breast milk. Compounds readily react on certain metal oxide surfaces. • CCl4: oxides of V, Cr, Ti and Fe

  3. Reactivity Fe oxidation state Non-aqueous (UHV) Fe oxide phase Coordination Aqueous ? ? ? Not all phases of Fe-(hydr)oxides react with CCl4 FeOOH (goethite) 3+ Octahedral NR ? w/ adsorbed Fe2+ 3+ Octahedral Reactive ? Fe2O3 (hematite) 3+ Octahedral NR Fe3O4 (magnetite) 2+,3+ Oct. & Tet. Reactive Fe1-xO (wustite) Oct. & Tet. ? 2+ - Fe metal (ZVI) 0,2+,3+ Reactive Reactive

  4. Project goals • Determine whether CCl4 reacts at hematite, magnetite and wustite surfaces in UHV. • Identify unique characteristics of Fe-oxides surfaces responsible for observed reactivity.

  5. Experimental Approach

  6. Surface preparation in ultrahigh vacuum (UHV) • Chamber with base pressure = 3x10-10 T Heat Heat Heat LN2 • Ar+ ion sputtering 1-2kV, 3-10 mA • Annealing 950-1100K Ion gun in UHV in pO2 = 10-6-10-5 T • Characterize surface phase with LEED

  7. Surface preparation conditions control surface Fe-oxide phase

  8. QMS Temperature Programmed Desorption (TPD) experiments Heat Heat LN2 CCl4 multi-layer desorption CCl4 monolayer desorption Recombinative desorption of CCl4 and C2Cl4 OCCl2 (phosgene) desorption Dosing tube FeCl2

  9. Surface Abstraction Cl Cl 2CCl2 C2Cl4 C OCCl2 O 2Cl + CCl2 CCl4 Fe3O4(III) Cl FeCl2 Fe Fe3O4(III) Proposed reactions of CCl4 on Fe3O4 (III) surface Recombinative Desorption 2 X

  10. • 0.3 L dose contains enough CCl4 to cover entire surface (1 ML 20%) • CCl4 does not only react at minority site (e.g., defects). • CCl4 must react at site(s) that cover the entire surface. How much of the surface reacts with CCl4? No CCl4 desorbs after doses of < 1 ML Amount of CCl4 desorbed (a.u.)

  11. Between doses: anneal to 450 K No FeCl2 desorption Initial dose Where does the reaction occur? OCCl2 production • Fe-Cl surface species inhibit CCl4 degradation reactions

  12. What did we learn from the TPD studies? • CCl4 readily reacts with the Fe3O4(111) surface to • predominantly form OCCl2 • This reaction likely occurs at regular surface sites • Fe-Cl surface species inhibit further reaction What do we want to know about these reactions? • What type of surface site reacts with CCl4? • How do Fe-Cl species inhibit CCl4 degradation?

More Related