1 / 8

Covalent and non-Covalent Functionalization of Single Walled Carbon Nanotubes (SWNTs)

Covalent and non-Covalent Functionalization of Single Walled Carbon Nanotubes (SWNTs) . Paul S. Engel, Vittal B. Gudimetla, David W. Abmayr, Runtang Wang, W.E. Billups, Ravi Singh, and Suzy Torti.

tyne
Télécharger la présentation

Covalent and non-Covalent Functionalization of Single Walled Carbon Nanotubes (SWNTs)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Covalent and non-Covalent Functionalization of Single Walled Carbon Nanotubes (SWNTs) Paul S. Engel, Vittal B. Gudimetla, David W. Abmayr, Runtang Wang, W.E. Billups, Ravi Singh, and Suzy Torti

  2. As discovered by W. E. Billups and coworkers, SWNT radical anions can react with a variety of organic compounds to functionalize the SWNT sidewalls. We find that sulfides react as well and can be used to introduce thiol groups onto SWNTs. Thiol groups are potentially useful for covalent bonding to polymers, and attaching fluorescent labels and biologically active compounds under mild conditions.

  3. The evidence for SWNT functionalization is a large increase in the Raman D:G ratio, a sizeable weight loss on TGA and the appearance of “worms” of 1.5 to 4.3 nm height in AFM.

  4. In contrast to forming chemical bonds to SWNTs, noncovalent functionalization has been used to render SWNTs soluble in water and has the advantage that the fluorescence properties of SWNTs are preserved. • However, SWNTs can easily become detached from surfactants like SDBS and poloxomers like pluronic. • A possible solution is to encapsulate SWNTs in a water-soluble polymer from which escape is difficult. • This might be achieved by first complexing SWNTs with an appropriate polymer and then crosslinking the backbone.

  5. The crosslinking concept is illustrated here. A triblock copolymer is selected consisting of an inner hydrophobic core (gray), a center crosslinkable block (red) and an outer, water-soluble segment (blue).

  6. Diamine crosslinker EDC PEO(17)-PAA(35)-PS(14) suspending SWNT in water • The very hydrophobic SWNT is surrounded by a polystyrene (PS) inner block. • The outer block is a hydrophilic polyethylene glycol (PEG or PEO). • The central block is polyacrylic acid (PAA), which is crosslinked by addition of a carbodiimide (EDC) and a water soluble diamine. • The resulting species was termed a “PEG-egg” by Richard Smalley.

  7. The black suspension of PEG-eggs (right hand vial above) fluoresces as intensely as SWNTs suspended in SDBS and remains unchanged for years. • PEG-eggs can be isolated, lyophilized, and readily re-suspended in water. • The aqueous suspension is stable to bovine serum albumin and shows no acute toxicity at 33 ug/mL towards macrophage and kidney cells. • 1064 nm NIR irradiation of aqueous PEG-eggs produces a large temperature rise potentially useful for killing cancer cells.

  8. Temperature of aqueous PEG-eggs after 30 s exposure to a 3W/cm2 YAG laser. Starting temp. was 22 oC. 35 30 SWNT PEG-egg, 1 mg/mL 25 20 Temperature increase (oC) 15 10 5 Eggs only 0 0 200 400 600 800 1000 1200 concentration (ug/mL) A higher concentration produces a greater temperature rise but multi-walled carbon nanotubes (MWNTs) are very likely to give an even greater response if MWNT PEG-eggs can be made. Control experiments are required to verify that the observed heating is not due merely to the blackness of the suspension.

More Related