1 / 12

Determining Properties of Wound Dressings for Negative Pressure Wound Therapy

Determining Properties of Wound Dressings for Negative Pressure Wound Therapy. Lora Aboulmouna, Lisa Lewicki, Ryan Frye. What is NPWT?.

vail
Télécharger la présentation

Determining Properties of Wound Dressings for Negative Pressure Wound Therapy

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Determining Properties of Wound Dressings for Negative Pressure Wound Therapy Lora Aboulmouna, Lisa Lewicki, Ryan Frye

  2. What is NPWT? The application of sub-atmospheric pressure to a sealed wound for the purpose of removing fluid and stimulating a cellular response through the mechanical stretching of wound tissue. • Process: • Material inserted into wound bed • Sealant drape • Fluid drain tube • Vacuum Applied • -50 to -120 mmHg

  3. Pioneer Technology • Aims to discover and create solutions in the healthcare community beginning with advancements in wound care while bridging the gap between healthcare technology and nature • Green healthcare • Discover the benefits of Sorbact and likelihood of commercial success • Mentor: Josh Smith, Vice President of Pioneer Technology • Advisor: Dr. Jack Fisher, Associate Clinical Professor of Plastic Surgery at Vanderbilt University

  4. Wound Dressings KCI Foam Sorbact Gauze

  5. Project Goals • To determine • Material resistance • Flow rate • Pressure gradient • Saturation points of the three materials in a negative pressure environment. • Build a model that provides a controlled environment

  6. Equating the Materials • Procedure: • Obtained three materials with equal masses • Measured water displacement in a graduated cylinder of each sample • Mass and volume were used to determine the density of each material

  7. Preliminary Experiment: Material Behavior in NP Environment • Used skin analog in mold to simulate wound bed • Inserted appropriate material amount • Covered with sealant drape • Applied pressure of 180 mmHg • Observed material compression

  8. Results of Preliminary Experiment • All materials compressed under negative pressure

  9. Design Setup Clinical Pressure Ranges: • -50 to -120 mm Hg Bernoulli’s Principle: • Height of water • Fluid velocity • Vacuum Pressure • Density • Head losses • Pipe P = -180 mm Hg h Q

  10. Design Obstacles • Resistance of tubing • Flow meter range accuracy (o.4 to 40 mL/min) • Small flow rates may cause readings to not be significantly different • All flow travels through materials • Varying Pressure

  11. Future Directions • Obtain accurate flow measurements • Awaiting shipment of proper flow meter • Test flow while varying pressure • Test saturation • Weigh materials before and after saturation

  12. References • Borgquist O, Ingemansson R, Malmsjö M. Wound edge microvascular blood flow during negative pressure wound therapy: examining the effects of pressuresfrom -10 to -175 mmHg. PlastReconstrSurg In press. • Ljungh, A, N Yanagisawa, and T Wadström. "Using the principle of hydrophobic interaction to bind and remove wound bacteria." Journal of Wound Care 15.4 (2006): n. pag. Web. 6 Nov 2010. • Smith, Jan, and Peter Robertsson. Method for Dressing a Wound. , 2010. Web. 27 Oct 2010. <http://www.google.com/patents/about?id=ApHVAAAAEBAJ&dq=sorbact> • "Science Behind the Therapy — KCI." Science Behind The Therapy. Web. <http://www.kci1.com/KCI1/sciencebehindthetherapy>.

More Related