1 / 21

Announcements

Announcements. Assignment 8 posted Due Friday Dec 2 nd . A bit longer than others . Project progress? Dates Thursday 12/1 review lecture Tuesday 12/6 project demonstrations in the lab (no presentations) Sunday 12/11 project reports due to me by email

vala
Télécharger la présentation

Announcements

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Announcements • Assignment 8 posted • Due Friday Dec 2nd. A bit longer than others. • Project progress? • Dates • Thursday 12/1 review lecture • Tuesday 12/6 project demonstrations in the lab (no presentations) • Sunday 12/11 project reports due to me by email • Tuesday 12/13 final exam, 1pm-3pm here.

  2. Last Topic! • Analog / Digital Conversion

  3. Introduction • Most signals are naturally analog (e.g. a voltage) • Digital techniques are often more useful: data storage, processing, computing, error free signal transmission etc. • We need ways to convert analog signals to digital • Want A/D converters to be fast, accurate and cheap • There are various methods of analog to digital conversion • Digital to analog conversion is also important: e.g. CRT video monitors convert computer generated digital information into analog signals used to guide an electron beam. MP3 players convert music stored digitally into analog signals to drive an amplifier and speaker. • Digital to analog conversion is an integral part of some types of analog to digital converters

  4. Digital to Analog Conversion • D/A or DAC: convert a quantity specified as a binary number to a voltage or current proportional to the value of the digital input • Simplest approach - recall the weighted summing opamp circuit: MSB (‘eights’ –smallest R) Binary weighting - if each binary input is a 5V signal, Voltage output corresponds to 1V per bit. LSB (‘ones’ – largest R)

  5. N-bit Weighted DAC • What if we want higher resolution (more bits)?: • In practice, binary weighted adder is not used for resolution exceeding 4 bits • Typical value of smallest R=10kΩ, • Consider a 10-bit converter, Vref=1V, giving 1/1024~1mV resolution • Three problems: • Biggest R = 29R =5MΩ; too large (noisy, expensive, large error)! • Precision: for LSB to be meaningful, R must be precise to 1 part in 210 • R=10.00±0.01kΩ - 0.1% • Conversion time: • If Cstray=100pF, RC=5MΩ 100pF=0.5ms (too slow)

  6. Solution: R-2R Ladder Vout • Using just R and 2R removes the problems of the weighted adder • R values are reasonable • Precision requirements can be met • RC time constants are small These are digital switches

  7. R-2R Ladder: Thevenin analysis How do we end up with these weights? Apply Thevenin's...

  8. D/A converter Specifications • In reality, you can buy DACs prebuilt in a chip. Some specs to look out for: • Resolution (precision): maximum output resolution is 1 bit in 2n-1 times the voltage range (Size of the smallest possible voltage step) • Accuracy: percentage error in voltage output • Linearity: deviation of the stepwise output from a straight line • Settling time: Minimum time required for conversion • Output range: Range of output analog voltage for max digital input swing • Input digital code: e.g. straight binary, BCD, Gray code Ideal DAC: Vout digital input

  9. D/A converter Specifications R-2R ladder What is the best resolution attainable for a range of 10V? What is the maximum allowable conversion frequency given a settling time of 1μs?

  10. D/A converter Specifications What is the best resolution attainable for a range of 10V? =10/(28-1) = 39.2mV What is the maximum allowable conversion frequency given a settling time of 1μs?

  11. D/A converter Specifications What is the best resolution attainable for a range of 10V? =10/(28-1) = 39.2mV What is the maximum allowable conversion frequency given a settling time of 1μs? =1/ 1μs = 1MHz

  12. ADC Type I: Digital Ramp ADC • Counter counts up with each clock pulse • DAC outputs a slightly higher voltage each clock pulse • Compare this to the input voltage using the comparator • Comparator output goes to counter and parallel input/output shift register • when the DAC output exceeds the input voltage • comparator output goes low • Storage register receives a clock pulse and latches the counter values • Counter receives a LOAD input to reset to 0 input voltage comparator storage register

  13. ADC Type I: Digital Ramp ADC Big drawback: sampling interval depends on voltage level: Sampling is also slow - need to count up from 0 every time.

  14. ADC Type II: Tracking ADC • A more efficient method • Compares analog signal input with the output of a DAC connected to an up/down counter. • Comparator determines whether DAC output is larger or smaller than analog input • If DAC output is smaller, comparator output starts counter counting up • If DAC output is larger, comparator starts counter counting down • The digital output "tracks" the analog input signal by changing 1 bit at a time • The rate at which the counter changes is determined by an external clock

  15. ADC Type II: Tracking ADC Digital output has to "catch up" to analog input • Digital output is not latched so is never perfectly stable • oscillates by +/- 1 bit. "bit bobble"

  16. ADC Type III: Successive Approximation ADC successive approximation register • Uses a digital feedback loop which iterates once per clock cycle • Similar structure to the digital slope ADC, but replace the counter with a "successive approximation register" (SAR) • The SAR is used to make a digital estimate of the analog input based on the comparator output • The estimate is converted back to analog by the DAC and compared to the input • The cycle repeats until the "best estimate is achieved • Best estimate is then latched into the output shift register • Different algorithms exist for the SAR - the most common is the binary search algorithm Shift register

  17. Binary search example • The algorithm can be summarized as "go to the midpoint of the non-excluded range" • Assume an 8-bit ADC with an analog input voltage range of 0 to 10V • 0V = 000000002 = 010 • 10V = 111111112 =25510 • one bit (Least Significant Bit, LSB) is 10/255=39.22mV • Assume a signal input of 7.09V • The comparator outputs • HIGH if the estimate < the signal input • LOW if the estimate > the signal input • The SAR does the following (n is the current clock cycle): • comparator is HIGH (estimate too small): adds 1 to MSB-(n+1) • comparator is LOW (estimate too large): subtracts 1 from MSB-(n+1)

  18. start at the midpoint adds 1 to MSB-(n+1)=bit 7 subtracts 1 from MSB-(n+1)=bit 6 • This algorithm is guaranteed to find the best possible estimate in a number of clock cycles equal to the number of bits • In this example, best estimate was on the 7thclock cycle, but the difference between the 7th and 8th is within the ADC resolution

  19. The binary search algorithm is fast and efficient • It completes its estimation in a fixed number of clock cycles • The final result is latched after a fixed number of clock cycles (=number of bits), so the sampling occurs at regular intervals (unlike the digital ramp ADC)

  20. Example ADC question: • A 10-bit digital slope integrating A/D converter has a full-scale input of 10V. If the clock period is 15 μS, how long will it take to convert an input of 4V? How long for an input of 10V? 10 bits means 210 =1024 levels. Full scale input of 10V means each level is 10V/1024=9.77mV 4V corresponds to 4/9.7710-3=409.6 - round up to 410 A clock period of 15μs mean 4V will take 15μs410 =6.15ms 10V will take 15μs1024=15.36ms

  21. Example ADC question: • A 10-bit digital slope integrating A/D converter has a full-scale input of 10V. If the clock period is 15 μS, how long will it take to convert an input of 4V? How long for an input of 10V? 10V will take 15μs1024=15.36ms • What increase in speed can be gained by using a 12-bit successive approximation converter instead of the digital slope converter, assuming a full-scale input voltage.? • A 12-bit SA converter will take 12 clock cycles = 180 μs, regardless of the input voltage • so for 10V full scale input, the speed increase is 15.36ms/180 μs =85.3 times. • So the SA converter is both faster and more accurate (12 bits gives 4096 levels, compared to 1024 levels for 10 bit)

More Related