1 / 35

4. Initiation of Raindrops by Collision and Coalescence

4. Initiation of Raindrops by Collision and Coalescence. 4.1 Introduction to precipitation physics. 4.2 Setting the stage for coalescence. 4.3 Droplet growth by collision and coalescence. 4.4 Growth models and discussion. 4.1 Precipitation Physics.

vasilis
Télécharger la présentation

4. Initiation of Raindrops by Collision and Coalescence

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 4. Initiation of Raindrops by Collision and Coalescence 4.1 Introduction to precipitation physics 4.2 Setting the stage for coalescence 4.3 Droplet growth by collision and coalescence 4.4 Growth models and discussion

  2. 4.1 Precipitation Physics • Central task: Explain how raindrops can be created by condensation and coalescence in times as short as 20 minutes. • Observed interval between initial drop development of a cumulus cloud and the first appearance of rain. • Collisions and coalescence • Theory still uncertain • Drops need to grow to 20m before collision and coalescence processes occur in significant numbers.

  3. Drops size • Small drops • small collision cross-section and slow settling speeds. • Little chance of colliding. • Coalescence • Drops spectrum has a spread of sizes and fall velocities • Some drops of 20m must exist.

  4. Coalescence • Rate of collision  r4. • Once coalescence begins, it proceeds at an accelerating pace. • By time a few drops reach 30m, coalescence is the dominating processes. • Typical 1mm diameter raindrop may be the result of order of 105 collisions. • Before this can begin, some other processes must account for production of a few droplets as large as 20m in radius • 1 in 105 drops, or 1 per liter of cloud volume!

  5. 4.2 Setting the stage • A cloud drop can grow by condensation to a radius of 20m in 10 minutes under constant S if super-saturation is 0.5%. • This would require a sustained updraft of 5 m/s or greater. • Something else is causing this spectral broadening toward larger sizes. • Giant sea ice nuclei? • Not observed • Mixing between the cloud and its environment • Most likely explanation.

  6. Homogeneous mixing • Sub-saturated (RH < 100%) cloud-free air is entrained into a cloud. • Mixing occurs quickly and completely • all droplets at a given level are exposed to the same sub-saturation. • Drops evaporate until saturation is once again reached.

  7. Homogeneous mixing • Effect: • Reduces all droplet sizes by evaporation • Reduces the concentration by dilution in proportion to the amount of outside air introduced. • Possibly introduce newly activated droplets. • Time required for mixing is short compared to the time for drops to evaporate and re-establish vapor equilibrium. • Explains broadening of drops to smaller sizes, but not the creation of larger drops.

  8. Inhomogeneous mixing • Time scale of droplet evaporation is short compared to that of turbulent mixing. • Evaporation proceeds rapidly in region just exposed to entrained air. • Creating volumes of air that are drop free, but saturated. • Volumes mix with unaffected cloud, reducing concentration by dilution without changing their size. • Cloud consists of many of these volumes with different sizes and mixing histories. • Again, can be used to explain drop broadening to smaller sizes, but not broadening to large sizes.

  9. Cloud top entrainment • Mixing of dry air and environmental air at cloud top. • Contributes to broadening of cloud drop spectra to larger drops sizes. • “Understanding the significance of cloud-top entrainment may eventually explain many of the observed microphysical characteristics of clouds.” – 1989

  10. 4.3 Droplet growth by collision and coalescence Collisions • Gravitational force • Dominates in clouds. • Large drops fall faster than small drops. • Large drops overtake and capture a fraction of these small drops. • Electrical force • Enhance the collection of small droplets • Usually strong local effect. • Aerodynamic force • Some drops are swept aside in the air-stream around the drops.

  11. Collision efficiency • Ratio of actual number of collisions to number of collisions geometrically possible. • Factors: • Size of collector drop. • Size of the collected droplets. • Collisions don’t guarantee coalescence.

  12. Options • Bounce apart. • Coalesce, and remain permanently together. • Coalesce temporarily, separate, and retain their identities. • Coalesce temporarily, separate, and break into a number of small drops. • For r < 100 m, 1 and 2 are important.

  13. More efficiency • Coalescence efficiency • Ratio of Number of coalescences/ Number of collisions. • Collection efficiency • Collision efficiency x Coalescence efficiency • Charged drops or electrical fields present? • Coalescence efficiency  1 • Clouds, collection efficiency = collision efficiency • Task: Determine the collision efficiency or collision rates among a population of droplets.

  14. Procedure • Three steps • Determine droplet terminal fall speed. • Determine collision frequency. • Growth equations.

  15. Terminal Velocity

  16. Collision efficiencies

  17. Collision efficiencies

  18. Example: A drop with a radius of 40 micrometers is at the cloud base (z=0). The cloud has a liquid water content of 1.5g/m and a steady updraft of 2m/s. The terminal velocity of the drop is given by u=(8X10 s )R. R is in mm. Assume a collection efficiency of unity. 3 3 -1 • What is the size of the drop when it • begins to fall? • 2. What is the maximum height that the drop • will reach?

  19. Another Example The liquid water content of a cloud 2 km in depth varies linearly from 1 at the base to 3 at the top. A drop of 100 diameter starts to fall from the top of the cloud. What will be its size when it leaves the cloud base? Assume that the collection efficiency is 0.8 and that there is no updraft.

  20. Continuous-Growth equation The Bowen Model

  21. 4.4 Growth models and discussion * Statistical-discrete growth The Telford and Robertson Models • Statistical fluctuation in droplet concentration - Initial bimodal size distribution of droplets - A drop grows by discrete collision and capture events, not by continuous growth processes - Some drops have more collisions than others

  22. - Important in early stage growth to get a few larger drops - Rain is produced when one drop in 10 gets an initial head start and then grows by gravitational coalescence - Require shorter time for a droplet to reach raindrop than continuous growth - Collision efficiencies are not unity

  23. * Stochastic growth • Consider few larger drops which have • made a coalescence collision after a • rather short time - The next collisions are more favorable giving a further widening of the drop size spectrum

  24. - To describe how a size distribution of droplets changes with collection • Every possible combination of droplets • that can coalesce • The probability of each coalescence • The change in these probabilities after • each coalescence

  25. Example: - 10 of 100 large droplets will collect a small droplet during a given time - Then 1 in 10 of each large size will collect a smaller droplet - Large droplets then grow at different rates - The distribution spreads

  26. Physical Processes responsible for broadening size distributions - Autoconversion - Accretion - Large hydrometeor self collection

  27. * Effect of condensation on coalescence Condensation Narrowing Spectrum Accelerating coalescence

  28. East (1957)

  29. * Effects of turbulence on collisions and coalescence Three possible mechanisms: i. Drops of different sizes respond differently to a fluctuating velocity ii. The overlapping of turbulent eddies iii. Abrupt inhomogenieties – a few intense turbulence surrounded by areas of weak turbulence

  30. * Remarks - The collision-coalescence process is how precipitation forms in warm clouds (those clouds that remain above freezing). - For the process to work efficiently, the droplet spectrum cannot be too narrow. Otherwise, the droplets will have similar terminal velocities and collisions will be infrequent. - As the large drops get larger than 4 or 5 mm, they become unstable and break apart. This creates some additional large drops which can themselves start to grow.

  31. * There are still some unknown features of the collision-coalescence process i. Rain has been observed to occur in warm clouds within 15 minutes. Yet, our current understanding of collision-coalescence suggests a much longer time period is needed. • The mechanism by which a few, large drops form is unknown, but once they do form they can grow. iii. The answer probably lies in a better understanding of how turbulence affects droplet populations. Statistical methods are probably also needed to better understand and model the process by which warm cloud precipitation develops.

  32. Meteorology 342 Homework (4) 1. Problem 8.1 2. A drop with an initial radius of 100 micrometers falls through a cloud containing 100 droplets per cubic centimeter, which it collects in a continuous manner with a collection efficiency of 0.8. If all the cloud droplets have a radius of 10 micrometers, how long will it take for the drop to reach a radius of 1 millimeter? Assume a drop fall speed similar to that in problem 1. Also assume the cloud droplets are stationary and that the updraft velocity in the cloud is negligible.

More Related