1 / 9

Boilers By Ryan Majkut

Boilers By Ryan Majkut. Objective: to discuss different types of boilers and explain how they work. What is a Boiler?. A water containing vessel which transfers heat from a fuel source (oil, gas, coal) into steam

vianca
Télécharger la présentation

Boilers By Ryan Majkut

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. BoilersBy Ryan Majkut Objective: to discuss different types of boilers and explain how they work

  2. What is a Boiler? • A water containing vessel which transfers heat from a fuel source (oil, gas, coal) into steam • This steam is piped to a point where it can be used to run production equipment, to sterilize, provide heat, to steam-clean, etc • Boilers are commonly used to heat larger office buildings • They work by sending hot water through pipes around the building that heat up the air around them and cause the room to get warmer

  3. Fire-tube Boiler • A fire-tube boiler was more common in the 1800s. It consists of a tank of water perforated with pipes. The hot gases from a coal or wood fire run through the pipes to heat the water in the tank, as shown here: • The whole tank is under pressure, so if the tank bursts it creates a major explosion

  4. Water-tube Boiler • More common today are water-tube boilers, in which water runs through a rack of tubes that are positioned in the hot gases from the fire

  5. Boiler Systems • Closed System- The energy given up by the steam is sufficient to convert it back into the form of water. When 100% of the steam produced is returned to be reused, the system is called a closed system. • Open System- Since some processes can contaminate the steam, it is not always desirable to feed the condensate back into the boiler. A system that does not return the condensate is called an open system. A More Complex Water-tube Boiler

  6. Condensing Boiler • uses a secondary heat exchanger or condensing coil to recover heat from the hot flue gases • The temperature of this flue gas will be near to that of flame.

  7. Feed Water Contamination • The boiler receives the feed water, which consists of recovered condensed water (return water) and fresh water (make-up water) • The steam, which escapes from the boiler, frequently contains liquid droplets and gases • The water remaining in liquid form at the bottom of the boiler picks up all the foreign matter from the water that was converted to steam • These impurities lead to poor heat transfer and reduction in the efficiency of the boiler • The impurities must be blown down by the discharge of some of the water from the boiler to the drains

  8. More Complex Systems • Boilers may contain additional components such as: • Economizers to increase the boiler efficiency • Superheaters to heat the steam above the saturation temperature • Process heaters and steam turbine systems to power a variety of steam • Feedwater heaters to remove dissolved gases, such as oxygen

  9. References • http://www.alken-murray.com/Boilerworks.html • home.btconnect.com/.../ condensing_boiler.htm • http://www.business-wiz.com/products/boilers.html • http://www.abma.com/pack_ft_boilers.php • www.lenntech.com/boiler/ boiler-feed-water.htm

More Related