1 / 14

11 T Dipole Integration & Plans M. Karppinen

11 T Dipole Integration & Plans M. Karppinen. From short models to the series. 11 T Nb 3 Sn Dipole Project. Short model program Magnetic and mechanica l design validation Conductor development Magnet protection Material choices Fabrication process validation Scale-up

vidal
Télécharger la présentation

11 T Dipole Integration & Plans M. Karppinen

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 11 T Dipole Integration & PlansM. Karppinen From short models to the series

  2. 11 T Nb3Sn Dipole Project • Short model program • Magnetic and mechanical design validation • Conductor development • Magnet protection • Material choices • Fabrication process validation • Scale-up • Coil fabrication (winding, curing, reaction, impregnation) • Handling • Cold mass integration (collaring, yoke assembly) • Cold mass integration • Cold bore tube • Bus-bar routing • Interconnects • Spool correctors • Heat exchanger • Instrumentation • Alignment • Cryo-assembly (5.5 m) • Cold-test in SM18 • Collimator integration • Collimator dimensions • Interfaces (powering, instrumentation, vacuum, cryogenics, ...) • Cryostat design • QC and testing • Transport & handling M. Karppinen CERN TE-MSC

  3. 11T Dipole Coldmass (5.3 m) 5´911 • To reduce the length by 0.2 m the B0 shall be 11.66 T, which requires additional ~530 A (wp 81% => 85%) • TF correction requires -300 A, so a bi-polar 600 A trim PC could do the job. 5´772 5´546 6´257 (Ltotal) 5´772 (LCM) 242.5 242.5 M. Karppinen CERN TE-MSC

  4. FNAL 1-in-1 Model Magnet (1m) & CERN Coils Courtesy of D. Mitchell, FNAL 22 May 2013 M. Karppinen CERN TE-MSC

  5. CERN Construction Status • Coil fabrication tooling: • Winding, curing, and reaction fully operational • Vacuum impregnation system now commissioned • Practice coil fabrication • PC-#1-2 (Cu-cable) reacted, being impregnated • PC #3 Nb3Sn (low-Jc WST strand) scrapped • Nb3Sn (RRP-54-61) reacted, to impregnate • Magnet R&D: • Cable insulation (braided S2-glass & Mica) • ODS (oxide dispersion strengthened) wedges • Selective laser sintering (SLS) end spacers • Coil pre-loading concept (“pole-loading”) • Magnet protection (inter-layer heater) Coil reaction Coil impregnation Reacted Nb3Sn (RRP-54/61) coil M. Karppinen CERN TE-MSC

  6. CERN 11 T Dipole Coil Loading plate 2 mm 316LN SLS End Spacers with “springy legs” ODS Cu-alloy Wedges Braided 11-TEX S2-glass on “open-C” Mica sleeve Courtesy of D. Mitchell, FNAL M. Karppinen CERN TE-MSC

  7. CERN Short (2 m) Model Program • Assemble and test the RRP-54/61 coil (reacted) as single coil assembly (MBHSS101) using existing collars, yoke, welded outer shell, and end plates • Two RRP-108/127 coils to assemble and test the 1st 1-in-1 model (MBHSP101) • Two RRP-132/169 coils to assemble and test the 2nd 1-in-1 model (MBHSP102) • Collared coils from MBHSP101 & 102 to assemble and test the 1st 2-in-1 model (MBHDP101) • Idem for PIT-cable: 2 x 1-in-1 model (MBHSP103-4) to have tested collared coils for the 2nd 2-in-1 model (MBHDP102). • Will be conflicting with MQXF and other magnet projects in terms of human resources and infrastructure M. Karppinen CERN TE-MSC

  8. CERN Single Coil Assembly Courtesy of C. Kokkinos & T. Lyon CERN TE-MCS Aftrer assembly at 293 K At 1,9 K, 11.02 T, 14.1 kA Azimuthal coil stress (Mpa) Azimuthal coil stress (Mpa) M. Karppinen CERN TE-MSC

  9. CERN Short Model Schedule Oct-Nov -13 Jan-Feb -14 Apr-May -14 1-in-1 #1 Test Nov -14 – Jan -15 Feb-Mar -15 1-in-1 #2 Test Apr-Jun -15 2-in-1 #1 Test 1-in-1 #3 Test 1-in-1 #4 Test 2-in-1 #2 Test M. Karppinen CERN TE-MSC

  10. CERN Prototype (5.5 m) Schedule • Start with winding trials using Cu-cable: • simplified trials • coil with bare cable • first practice coil with insulated Cu-cable to react and pot (PC-1). • First Nb3Sn practice coil with possibly low-performance (cheaper) cable (PC-2) • First “real” coil (PC-3) to cold test as a single coil (mirror?) • Four (or eventually more..) more coils for 2 collared coils to construct the full-scale proto and test it in Mid-2016. • the 5.5 m schedule is compatible with the present LMF plans including the major procurements • Additional coil production lines will be required for series magnets • It is also vital to get the industry on board during the prototype construction to be ready for the series units M. Karppinen CERN TE-MSC

  11. CERN 5.5 m Prototype Schedule May-June 2015 July-August 2016 Single coil Qualification Test 5.5-m-long 2-in-1 Prototype Test M. Karppinen CERN TE-MSC

  12. Series production (First impression) • LS2: • Ions: Install 2 x units (4 X 5.5 m CM) in IR2 + 1 spare • Protons: Install 4 x units (8 X 5.5 m CM) in IR7+ 1 spare Deliver 6-10 fully tested 5.5-m-long 11 T Dipole cold masses Integrate 2-4 fully tested 15.6-m-long cryo-assemblies in the LHC • Coil production: • 12-20 off 5.5-m-long coils to deliver • 1 Production line/2 production lines • 1/2 coil in 12 w, 2/4 coils in 17 w • All coils: 26-43 months / 13-22 months • Cold mass integration: • Two collared coils 8 months / 5 months • Cold mass assembly 1 month • Cryostat assembly 1 month • Cold test 2 months • 6-10 CM X 11 / 9 months = 48-84 / 34-54 months • Cryo-assembly: • Cold mass integration: 2 months • Cold test: 2 months • 2 complete units min. 28 months M. Karppinen CERN TE-MSC

  13. Cold mass vs. coil production lines M. Karppinen CERN TE-MSC

  14. 2 Off Cryo-Assemblies for IR2 M. Karppinen CERN TE-MSC

More Related