1 / 9

The re-positioned ground pad is in the right place.

The re-positioned ground pad is in the right place. But:. Multiple ground tracers (see slide 2). Multiple Ground tracers. Multiple ground tracers caused by different heights of anchor pads. Different levels for tracers because of different heights of the anchor pads. A nchor and

vilina
Télécharger la présentation

The re-positioned ground pad is in the right place.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The re-positioned ground pad is in the right place. But: Multiple ground tracers (see slide 2)

  2. Multiple Ground tracers

  3. Multiple ground tracers caused by different heights of anchor pads Different levels for tracers because of different heights of the anchor pads

  4. Anchor and tracer beam are not joined As the anchor is displaced downward, the beam does not follow This beam is not tracer. I am not sure of why it is required though This beam is tracer – and this follows anchor

  5. Anchor edge and p0 edge don’t exactly line up I increased the size (width , along x-axis) of p0 such that it goes beyond anchor

  6. I am not able to fix this. This has to do with changing l, L1, L2 of line 64 of latest netlist. But I am not sure of how these parameters are computed Anchor Displaces out of P0 box

  7. In the absence of the tracers Different end points, not constrained to join the anchor.

  8. When the number of fingers is used as a parameter, it no longer spaces the comb drives out correctly in x. When the starting number of fingers is less than 10, the layout converter hangs, and no gds file is created. This should be fixed if the files that I sent are updated

More Related