1 / 11

Subject: Meeting with Janine Pigue of Siemens Water Technology, formerly US Filter,

Booster Enclosure Corrector Prototype Installation Filter Installation Dissolved O2 Update 7/6/07 Maurice Ball Fluids Engineering AD/Mechanical Support. Subject: Meeting with Janine Pigue of Siemens Water Technology, formerly US Filter, Start: Wed 7/11/2007 9:30 AM

waite
Télécharger la présentation

Subject: Meeting with Janine Pigue of Siemens Water Technology, formerly US Filter,

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Booster Enclosure Corrector Prototype InstallationFilter InstallationDissolved O2Update7/6/07Maurice BallFluids EngineeringAD/Mechanical Support

  2. Subject: Meeting with Janine Pigue of Siemens Water Technology, formerly US Filter, Start: Wed 7/11/2007 9:30 AM End: Wed 7/11/2007 11:30 AM Recurrence: (none) http://www.liqui-cel.com/ http://www.industry.siemens.com/Water/en/ http://www.industry.siemens.com/Water/en/?gkey=[us+filter]&gr=Branded&s=g&WT.srch=1 Us Filter-Interlake 2600 S 17th Ave Broadview, IL 60155 #(708) 345-7672 Broadview Sales person for Siemens Water Technology Janine Pigue #(708) 345-7290 Discuss modifying the system to accommodate Pbar and Booster LCW Systems Upgrade Liqui-cel membrane contactors with higher pressure rating, remove booster pumps

  3. Filter for Booster Installation Prototype • http://www.shelco.com/pdfs/MH_final.pdf • Pleated polypropylene media cartridge • 0.5 micron, 90% efficiency rating • Over 5-1/2 square feet of media, very high dirt holding capacity than other cartridges. • $24 each • Pressure drop vs GPM at 0.5 micron • At 2 GPM, delta P at less than 1 PSID • Recommended Changeout 25 PSID

  4. Filter Monitoring • Tap on Filter housing for inlet and outlet pressure monitoring • Local pressure gauges • Remote Pressure Transducers, • 0.5% of full scale accuracy • 4-20 mA output signal • Remote monitoring from Main Control Room • Acknowledgement to Kent Triplett, • Sensor testing and verification • Loop Power Source, 10-30 VDC

  5. Alarm Set Point • Filter Delta P Clean, at 1 GPM, 0.3 PSID • Corrector needs 80 PSID for 0.6 GPM • Booster 95 LCW System provides S=120 PSID min

  6. Bottom Line • Installing Small Filter in Enclosure will teach us : • Impact on New Corrector Program • Health of the Booster 95 LCW System • Protect prototype corrector during critical testing

More Related