1 / 17

Welcome 欢迎

Welcome 欢迎. Using the PCC 使用 PCC Dipl.-Ing. Manfred Schleicher. PCC enables to transfer recorded data from JUMO paperless recorders JUMO controllers with registration function PCC 可用来从久茂无纸记录仪，久茂带记录功能的控制器传递记录数据 … and provides this data in an archive data file 并在一个存档文件提供这数据

xaviera-camacho
Télécharger la présentation

Welcome 欢迎

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Welcome欢迎 Using the PCC使用PCC Dipl.-Ing. Manfred Schleicher

  2. PCC enables to transfer recorded data from • JUMO paperless recorders • JUMO controllers with registration function PCC可用来从久茂无纸记录仪，久茂带记录功能的控制器传递记录数据 … and provides this data in an archive data file 并在一个存档文件提供这数据 • This presentation exemplifies how to set the data transfer for a paperless recorder LOGOSCREEN nt via ETHERNET 此演示示例如何对一台无纸记录仪提供以太网设置数据传输 Using the PCC/ Manfred Schleicher (2012-01-03) 2

  3. LOGOSCREEN 500 cf LOGOSCREEN nt LOGOSCREEN cf / es PCC connection paperless recordersPCC所连无纸记录仪 Using the PCC/ Manfred Schleicher (2012-01-03) 3

  4. IMAGO F3000 IMAGO 500 PCC connection controllersPCC所连控制器 Using the PCC/ Manfred Schleicher (2012-01-03) 4

  5. There are four possibilities to transfer data有4种可能来传递数据 ETHERNET以太网 RS interface串口 MODEM connection调制解调器连接 PC interface and USB interface (LOGOSCREEN nt) 电脑接口和USB接口（LSnt） Transfer possibilities传输的可能 Using the PCC/ Manfred Schleicher (2012-01-03) 5

  6. In defined time intervals the PCC accesses the device 在定义的时间段PCC进入设备 The software analyses which data are recorded in the device and which are stored in the archive软件分析记录在仪器哪些在存档文件中 Data which are not in the archive are transferred to the archive and stored哪些数据不 LOGOSCREEN nt LS nt via ETHERNET通过以太网的数据传输 IP address 10. 10. 90. 41 Sub net mask: 255. 255. 0. 0 Gateway: 10. 10. 0. 1 Using the PCC/ Manfred Schleicher (2012-01-03) 6

  7. Read data are marked in the paperless recorder The memory capacity is defined as free memory The free memory is displayed at the front of the device With factory setting the displayed free memory refers to the readout via CF card When working with PCC the shown free memory should refer to the interface. The following setting has to be executed: Data to be read要读取的数据 Using the PCC/ Manfred Schleicher (2012-01-03) 7

  8. Devices from which data are transferred have to be entered in the device list Device lis设备清单t Using the PCC/ Manfred Schleicher (2012-01-03) 8

  9. Define LOGOSCREEN nt定义 nt Create a new device, define LOGOSCREEN nt Define communication Setup or ring memory via TCP/IP Using the PCC/ Manfred Schleicher (2012-01-03) 9

  10. IP-addressIP-地址 • The IP address of the recorder has to be entered. Using the PCC/ Manfred Schleicher (2012-01-03) 10

  11. Archive • Select the archive (s) in which the date have to be stored • In our example the data are stored in two different archives (one on the hard disc in the PC and one on a server) Using the PCC/ Manfred Schleicher (2012-01-03) 11

  12. Time settings • Time intervals for data transfer Using the PCC/ Manfred Schleicher (2012-01-03) 12

  13. The device listDefineLOGOSCREEN nt • In the menu “time settings” you can define a time synchronization • In our example at 6:00 a.m. the device time of the paperless recorder is synchronized with the time of the PC to which the paperless recorder is connected. (The assumption is that the time of the paperless recorder has a time deviation less than 30 sec to the time of the PC.) Using the PCC/ Manfred Schleicher (2012-01-03) 13

  14. Automatic modeStart automatic transfer • After start of the automatic mode the data of the devices are automatically collected every 2 hours • The status of the transfer is displayed Using the PCC/ Manfred Schleicher (2012-01-03) 14

  15. Archive • The archives are available an can be opened with the PCA3000 software Using the PCC/ Manfred Schleicher (2012-01-03) 15

  16. Automatic in background • With the function “automatic in background” the software is only shown as a little symbol. But it is active. • After restart of the PC, the PCC starts automatically and works in the background • With double click on the software is shown again Using the PCC/ Manfred Schleicher (2012-01-03) 16

  17. Thank you for your attention.

More Related