1 / 25

REFRACTION EXPERIMENTS IN WAVEGUIDE ENVIRONMENTS

REFRACTION EXPERIMENTS IN WAVEGUIDE ENVIRONMENTS. 指導教授 吳瑞北 學生 許宗堯. OUTLINE. Review : resonator, negative refraction Measurement technique The axially symmetric SRR, the omega SRR, and the S ring Solid-state structure. REVIEW. Waveguide miniaturization---subwavelength resonator

yosefu
Télécharger la présentation

REFRACTION EXPERIMENTS IN WAVEGUIDE ENVIRONMENTS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. REFRACTION EXPERIMENTS IN WAVEGUIDE ENVIRONMENTS 指導教授 吳瑞北 學生 許宗堯

  2. OUTLINE • Review : resonator, negative refraction • Measurement technique • The axially symmetric SRR, the omega SRR, and the S ring • Solid-state structure

  3. REVIEW • Waveguide miniaturization---subwavelength resonator • The phase delay of the forward-wave can be completely compensated by the phase advance of backward-wave.

  4. REVIEW • DNG metamaterial has negative refraction ENG DNG MNG DPS

  5. REVIEW • For normally incident wave • n2 is real, wave number is also real • n2 is pure imaginary, wave number is also pure imaginary → the wave is strongly attenuated inside the slab • For obliquely incident wave • Boundary condition : • kx1 = kx2 • dispersion relation

  6. REVIEW DNG uniaxial MNG

  7. MEASUREMENT TECHNIQUES • Many variations of rings and rods have been devised to achieve negative permittivities and permeabilities • Various geometries…. • driving criteria: • increase the bandwidth, reduce the losses, yield stable and repeatable results in measurements • Main ring used now : the edge-coupled SRR, the broadside SRR , the axially symmetric SRR, the omega SRR ,and the S ring.

  8. all the rings exhibit a frequency dispersive permittivity response, in addition to the required frequency-dispersive permeability response • However, the interesting region of permittivity response where negative values are achieved is usually much higher in frequency than the region where the permeability is negative, making this effect not usable

  9. MEASUREMENT TECHNIQUES • Transmission level can be measured without many difficulties. • The first step to perform transmission measurements on metamaterials is to obtain a proper incident beam • an approximated plane wave can be created by eliminating the interference from the external environment as much as possible

  10. PPW CONFIGURATION • slab aperture D = 5 cm • Frequency : around 10GHz • Far-field limit = =17 cm • Distance >17 cm

  11. PPW CONFIGURATION • The position of the sample is a result of a trade-off between incidence and reception • far enough: • the wave front exiting the waveguide coupler has enough space to flatten out and to approach a plane-wave front while it has to be far enough from the reception to minimize all near-field effects • close enough • the tapering effect of the absorbers cannot be avoided, and neither can the Gaussian far-field distribution due to the aperture source

  12. MEASUREMENTS OF VARIOUS RING • the axially symmetric SRR, the omega SRR, and the S ring

  13. AXIALLY SYMMETRIC SRR • Set of specific dimensions resonant and plasma frequencies • fmo ≈ 8 GHz,fmp ≈ 9 GHz, and fep ≈ 11 GHz • These frequencies are directly related to the thicknesses of the metallizations, the gaps, and other geometric parameters in the design of the SRR

  14. TRANSMISSION LEVEL OF AXIALLY SYMMETRIC SRR • a stand alone peak between 8.2 and 8.7 GHz at a refraction angle of about −30◦

  15. OMEGA SRR • peform both negative values of permittivities and permeabilities • Transmission band is between 12GHz to 13.2GHz

  16. OMEGA SRR • the refracted beam is seen to bend at an angle of about -27◦corresponding to an effective index of refraction of about −1.7 • It should also be mentioned that the losses of the prism at 12.6 GHz are smaller than 14 dB, which is acceptable

  17. S RING • S ring does not require the addition of a rod to exhibit a negative permittivity at similar frequencies to where it exhibits a negative permeability • The second important feature of this ring is that its shape can be easily modified to achieve desired frequency responses

  18. dash line: permittivity solid line: permeability

  19. TRANSMISSION LEVEL OF S RING

  20. SOLID-STATE STRUCTURE • A major drawback in most metamaterials realized to date is the losses that they exhibit • Various causes have been identified as a possible origin of losses, one of them being mismatch • Another major drawback of most of the current implementations of negative metamaterials is their mechanical fragility

  21. SOLID-STATE STRUCTURE • A way that appears to avoid both drawbacks is to realize a solid-state metamaterial • mechanical standpoint • it is less fragile • electromagnetic standpoint • it exhibits less mismatched boundaries

  22. TRANSMISSION LEVEL OF SOLID-STATE STRUCTURE • The insertion losses : we have measured the transmission power with and without the metamaterial sample • Without the metamaterials samples, the corresponding value at 8.85 GHz is −9.8 dBm • return loss at the incident interface is less than 5 dB the original solid-state structure

  23. TRANSMISSION LEVEL OF SOLID-STATE STRUCTURE

More Related