Download
1 / 6
60 likes | 124 Vues
Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs) Submission Title: [ Sponsor ballot comment resolutions on PICS ] Date Submitted: [September 20, 2011] Source: [Kunal Shah] Company [Silver Spring Networks] Address []
E N D
Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs) Submission Title:[Sponsor ballot comment resolutions on PICS] Date Submitted: [September 20, 2011] Source:[Kunal Shah] Company [Silver Spring Networks] Address [] Voice: [], FAX: [], E-Mail: [kshah@silverspringnet.com] Re: [] Abstract: [This document provides resolutions to comments#103, 104, 105, 106, 149, 150, 151, 152, 218, 227, and 228] Purpose: [This document provides resolutions to 4g sponsor ballot comments] Notice: This document has been prepared to assist the IEEE P802.15. It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. Release: The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P802.15.
Summary This document describes the proposed resolution on the comments related to PICS. The following comments are addressed: CID# 103, 104, 105, 106, 149, 150, 151, 152, 218, 227, and 228
Comments and proposed resolutions CID #103: clause 16 is too general for item RF10.1 MR-FSK Proposed change: 16.1 Proposed Resolution: Accept CID # 104, 105 and 106 Comment: Clause 8.1 does not provide a description of item RF10.2 MR-OFDM, RF10.3 MR-O-QPSK and RF10.4 MR-FSK Generic PHY Proposed change: Use right reference for MR-OFDM, MR-O-QPSK and MR-FSK Generic PHY Proposed Resolution: Revised. Change the reference for RF10.2 to 16.2, RF10.2 to 16.2 and RF10.4 to 8.1.2
CID #149:Item RF10 in Table D.3 should have a reference to "Clause 16." The status should be "O.3." Proposed change: See comment. Proposed Resolution: Revised. As FD6 is referred for SUN PHY device, Change the status of FD6 to O.3 CID #150: Make the references for the SUN PHY more in-line with what's done for other PHYs in the upcoming 15.4-2011. In doing this, there is no need for RF10.6. Proposed change: The references to MR-FSK, MR-OFDM and MR-O-QPSK should all be "Table 66, Clause 16." Also, remove RF10.6. Proposed Resolution: Revised. Resolved as per CIDs 103, 104 and 105. No need to remove RF10.6 as it specifies the selection for one of the frequency bands from table 66.
CID #151: Shouldn't the reference for RF10.4 be more specific? Proposed change: Change reference from 8.1 to 8.1.2.8.2 (or al least 8.1.2). Proposed Resolution: Revised. Resolved as per CID 106 CID #152: The reference for RF10.5 should be 8.1a. Proposed change: See comment. Proposed Resolution: Accept CID #218: Mandatory specifications of MR-O-QPSK are missing. Proposed change Add SpreadingMode DSSS RFxy:M, add RateMode zero Rfxy:M Proposed Resolution: Reviced. Add a new row RF14 for MR-O-QPSK operating modes. Add RF14.1 as a spreading mode DSSS with a reference to 16.3.2.4 and a status as RF10.3:M. Add RF14.2 as a RateMode zero with a reference to 16.3 and a status as RF10.3:M.
CID #227: Status of MLF15 should be FD6:M because it only applies to SUN PHYs, not all 802.15.4 radios. Proposed change: Change Status to FD6:M Proposed Resolution: Accept CID #228: Status of RF11.2, RF11.3 and RF11.5 should be FD6:O because it only applies to SUN PHYs, not all 802.15.4 radios. Proposed change: Change Status to FD6:O Proposed Resolution: Accept
