1 / 21

REFRIGERATION SYSTEM

REFRIGERATION SYSTEM. Chapter 4 Classroom Manual Page 67. OBJECTIVES. Diagnose six system malfunctions by gauge readings. Identify the low and high side of the air conditioning system. Read and understand temperature-pressure charts. Discuss temperature-pressure relationships. OBJECTIVES.

zacharee
Télécharger la présentation

REFRIGERATION SYSTEM

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. REFRIGERATION SYSTEM • Chapter 4 • Classroom Manual • Page 67

  2. OBJECTIVES • Diagnose six system malfunctions by gauge readings. • Identify the low and high side of the air conditioning system. • Read and understand temperature-pressure charts. • Discuss temperature-pressure relationships.

  3. OBJECTIVES • Identify differences between CFC-12 and HFC-134a systems. • Identify differences between thermostatic expansion valve (TXV) and fixed orifice tube (FOT) systems. • Understand the proper handling of refrigerants and refrigeration oil.

  4. INTRODUCTION • Figure 4-1, (Pg 68C) shows the dividing line between low and high sides. • Low side gauge is a compound gauge. • There is a direct relationship between pressure and temperature. • Air temp flowing through evaporator will be a few degrees warmer than the freon.

  5. Low side Expansion Valve ACSYSTEM High side

  6. SYSTEM DIAGNOSIS • Knowing the ambient air temperature. • Determine normal HIGH side pressure. • There are seven conditions for A/C systems. • 1 normal condition. • 6 conditions that indicate a malfunction.

  7. NORMAL OPERATION • Low-side gauge: Normal pressure • CFC-12: 32-33 PSI • HFC-134a: 30-31 PSI • High-side gauge: Normal pressure • CFC-12: 185-190 PSI • HFC-134a: 204-210 PSI

  8. PLATE 1 • Normal refrigerant charge expansion valve system. • Receiver/ Dryer in high side of system.

  9. PLATE 9 • Normal refrigerant charge orifice tube system. • Accumulator in low side.

  10. REFRIGERANT • Refrigerant is the term used when referring to the fluid that is used in an automotive air conditioning system. • “a gas used in a mechanical refrigeration system” page 77

  11. R-12 (CFC-12) • Dichlorodifluoromehtane is CFC-12 • Safe to Humans • Can withstand high pressures without decomposing or deteriorating • Boiling Point is -21.67 degree Fahrenheit • Does not react with A/C components • Soluble in mineral oil

  12. Temperature and PressureRelationship of CFC-12 • Freon temperature and degrees Fahrenheit are roughly the same from 20 to 70 degrees. • A gauge reading of 28 PSI equals a refrigerant temperature of 30 degrees. page 78

  13. 134a • New Refrigerant to replace CFC-12. • Tetrafluoroethane (R-134a) • Is a hydroflourocarbon (HFC) • Does not contain chlorine. • Molecules are 11 times smaller so must use barrier type refrigerant hoses. page 78

  14. R-22 for LEAK TESTING • R-12 = 50psi • R-22 = 100psi • Do NOT mix refrigerants • R-22 is NOT a replacement for R-12 • Small amounts of R-22 used in leak testing can be vented to atmosphere. page 82

  15. HANDLING REFRIGERANTS • All refrigerants must be properly stored, handled, and used. • Do NOT expose containers to flame. • Burning refrigerant creates poisonous gas. • Pound cans can NOT be identified by color. • Do NOT mix refrigerants. page 82

  16. SAFETY PRECAUTIONS • Wear safety glasses or goggles at all times. • Do NOT vent freon in a confined space. • Avoid breathing these or any other fumes. • HFC-134a is combustible. • Do NOT pressure test A/C system with shop air. page 84

  17. OTHER REFRIGERANTS • Use R-12 in R-12 systems. • Use R-134a in R134a systems. • R134a is the only legal replacement for R-12 after proper retrofit procedures. page 86

  18. REFRIGERATION OIL • R-12 uses mineral oil. • R134a uses PAG oil. • Ester Oil can be used in conversions. • Small Quantities of Mineral oil can be mixed with Ester oil. • Mineral oil and PAG oil are not mixable. page 86

  19. SERVICING TIPS • A/C oil level should be checked each time the system is drained. • Keep the cap on oil container. • Refrigerant oil is hygroscopic. • Moisture is damaging to A/C system.

  20. PREVENTIVE MAINTENANCE • Inspect electrical system for A/C • Inspect Blower motor for abnormal noises, leaves in ducts, etc.. • Check Voltages • Check Compressor Clutch operation • Check Belts and A/C Hoses • A/C Function Check page 88

More Related