1 / 19

CAL and SUBCOMPONENTS STATUS OVERVIEW

CAL and SUBCOMPONENTS STATUS OVERVIEW. T. Sch örner-Sadenius Hamburg University, on behalf of the CAL group ZEUS Meeting DESY 28 February – 4 March 2005. Outline. People and manpower situation CAL status: current status and recent problems CAL DQM development since Padova meeting

ziv
Télécharger la présentation

CAL and SUBCOMPONENTS STATUS OVERVIEW

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CAL and SUBCOMPONENTS STATUS OVERVIEW T. Schörner-Sadenius Hamburg University, on behalf of the CAL group ZEUS Meeting DESY28 February – 4 March 2005

  2. Outline • People and manpower situation • CAL status: current status and recent problems • CAL DQM development since Padova meeting • Current status of CAL, CFLT(P) and subcomponents(SRTD, SRTDFLT, PRES, F/R PRES, FNC, LED, LASER) TSS: CAL and Subcomponents

  3. Calorimeter Manpower IGeneral, Coordination Merging of CAL and HES groups slowly progressing • CAL DQM shifters now also do HES DQM checks • Progress also on organisational matters, but not on expert side. Current CAL coordination • TSS: general, DQM, students • Wladimir Hain (DESY): general, infrastructure • Kerstin Borras (DESY): so far HES general and DQM Mara Soares joined the CAL team and will take over CAL DQM coordination from TSS • TSS  run coordinator from April on. • Mara already now is responsible for a number of DQM tasks. • Thanks for joining and good luck! New permanent DESY physicist to join CAL team within few months. Request for oneHES post-doc ordedicated studentto backup Kerstin! Welcome! TSS: CAL and Subcomponents

  4. Calorimeter Manpower II DQM Coordinator Thomas Schörner HH Infrastructure Wladimir Hain DESY NEVIS and FE Electronics: Bill Schmidke Columbia Hardware Joker: Cathy Farrow Argonne/DESY LASER: Roberval Walsh McGill SRTD: Roberval Walsh McGill LED: Didar Dobur Freiburg B-PRES: S. Chekanov + H. Lim Argonne/DESY SRTDFLT: John Loizides (CFLT) Argonne F/RPRES, FNC, BCAL bases no dedicated manpower! Michele Sumstine Wisconsin (-03/2005)Andree Robichaud-V. McGill (-04/2005) Ying Cui Toronto Marcos Jimenez Madrid Avraam Keramidas NIKHEF Gabriel Grigorescu NIKHEF Cathy Farrow Argonne/DESY Changh Yi Zhou McGill General REsponsibilities Thanks to Michele andAndree and welcome toChangh Yi! DQM Experts We would appreciate oneor two new CAL students TSS: CAL and Subcomponents

  5. Current CAL Statusas of yesterday noon: v3959 Two holes: B22, tower 4: UNO problems B12, tower 8: UNO and QINJ It is reassuring to know that we are stable around 270 bad channels,if freshly calibrated … TSS: CAL and Subcomponents

  6. CAL Problems …… during the past few months – sometimes overlaid • Readout failure in december  only cured with help from Antonio P. and Henk B. from Amsterdam after three days of investigation. • Disk failure on backup readout computer AJAX and major problems with DQM PCs (not used for online) • Timing problems at the CAL-CFLT(P) boundary. • BCAL module 16: often many (>30) bad channels, cabling? • HV of BCAL module 22 fixed (Wladimir changed HV crate), then module 21 was giving some problems. • Os9 hc3control after A. Kotanski’s intervention more or less stable. Luckily there is always somebody who knows more than I do!Thanks especially to Alessandro and the Nikhef colleagues! TSS: CAL and Subcomponents

  7. CAL Status ctd. …… Computing, spares … Spare situation: • Front-end cards: C. Farrow efficient in repairing old ones – adequate suppluy of spares • NEVIS electronics: spares for all modules; format control card exchanged recently (debugging readout problem). • Digital cards: a few spares available; have to investigate 40-50 old, taken-out cards and repair if necessary. Also many ADCs around. • FCAL EMC PMTs (bases): 19 spares, could become one critical item. • BCAL bases: status unclear – my fault! • 9 newly repaired digital crate power supplies just came back! Computing situation • Teucer and Ajax (Solaris stations) running stably; however, old operating system not supported anymore (v2.4?), and recently disk failure on Ajax. But spares around. • 2+1 offline/DQM PCs which also gave problems recently but are stable now. • Slightly improving backup situation. TSS: CAL and Subcomponents

  8. Bad Channel Historysince Padova week BC updates Number of bad channelsis more or less stable with270 or so (after calibration). 1-2 stable holes in BCAL 22and 22. Some fluctuations inbetween due to localizedproblems, mostly solvedduring access days. FEC Increase since shutdown Now stable Many problems come andgo every now and then;especially in BCAL uncer-tainty of ~100 channels(B16, B29 etc.) Localizedproblem solvedduring access day. TSS: CAL and Subcomponents

  9. R13 t12 EMC1- R13 t12 EMC1+ F13 t12 EMC1- F13 t12 EMC1+ R13 t12 EMC2- R13 t12 EMC2+ F3 t11 EMC1- F3 t11 EMC1- HV Status since last ZEUS weekInfluence of beam injection / dump on HV settings Small trends of the level of 0.1-1% over half a year visible. TSS: CAL and Subcomponents

  10. Influence of HERA on CALBeam, trigger, HERMES affect kinematic distributions Sometimes difficult for CAL DQM to judge on data quality. TSS: CAL and Subcomponents

  11. CFLT Status M.Jaworski, D.Reeder, W.Smith D.Kcira, A.Savin, L.Li A.Everett, P.Ryan, M.Rosin, E.Brownson, T.Danielson CFLT efficiency RCAL4 Iso_e: 95-97% instead of 98% not a hardware issue – modify DQM toidentify problem Hardware status Bad channels Detector side:2x2 channels ½ height (cable) no 0’s Computers Two new Alphas are completely installed Old online machine ZAXP03 still can be used 2 bad serial cables in BCAL:sometimes no shut for ½ module DQM Offline and online DQM jobs are running TEC cards: 16 good, 8 bad Include FCLR and “location check” in the DQM TSC spare is o.k. TSS: CAL and Subcomponents

  12. TSS: CAL and Subcomponents

  13. Status of FHES HES red/blue:’97 installed modules  possibly tiny water leaks white:’98 installed modules  no indications for water leaks green:’01/’03 installed modules  no water leaks FHES 11: repaired and re-installed in Dec ’04, end of Jan’05 one half ski (1/6 module) failed electrically  should be repaired in summer break. • FHES 9, 10, 13, 15, 16 : • monitored closely, • all modules recovered, some half skis have high dark current, but are still biased • All modules completely working and read out ! Plan: take out, repair and re-install FHES modules 9, 10, 11, (not 13!), 15, 16 in the summer break. TSS: CAL and Subcomponents

  14. Ski – Cooling System: Status of RHES: • no major problem, few trips of HC3 power supplies • few failures in half modules due to connection on power distribution card • check all modules in the summer break. Status of DAQ: • no major problem • run control modified, such that an automatic repetition is initiated in case the SETUP runs into a timeout: • much better performance, only two drawbacks to be improved. • with the present pump-stand it was possible to lower the under-pressure even further:+0.2bar  -0.2bar • under-pressure over almost the full module height • several problems: air-leaks to be found, air relief device not working, … • anti-corrosive solvent added: • lots of problems with foam production blocking flow After a quite busy time now finally running stable ! HES • Summary • lots of troubles with the new cooling settings had to be solved • all “possibly leaky” modules in FHES recovered and working  • only few failures in the electronics in the meantime  HES took good data continuously during the past months  TSS: CAL and Subcomponents

  15. SRTD Status (Roberval) What happened since Padova? Bad channel history since Padova Current situation: TSS: CAL and Subcomponents

  16. S. Chekanov, W. Hain, H. Lim, S. Magill • Replaced: Fuses, power crates, readout cables, control cards • Problem reproducable in test stand with high temperature: serial data get quickly messed up if fans off! • Chip that distributes signals on control car • Fan problem? Fans with control signals? Aging of control card chips – replace? • DQM was moved to AFS • Number of bad HV channels as in 8/2004: 14 (of 416) TSS: CAL and Subcomponents

  17. Subcomponents Status I… basically no news! F/RCAL Presampler (no dedicated manpower): • FPRES south: problems in setting HV, no spares • FPRES (Wladimir): order of channels wrong in Adamo table? Has anybody ever used this? • RPRES okay • However, system has no dedicated man power; needs calibration etc. • Who is using which part of PRES? Historically only RPRES used? • Currently one bad channel. FNC (Info from Bill, Wladimir): • Test stand working, dubious front-end card needs inspection • Some FECs and the delay box need to be checked. • Sometimes giving problems in the readout (digital crate) exclude from readout? LED for F/RCAL (Freiburg): • Not in use currently. Situation rather unclear. TSS: CAL and Subcomponents

  18. Subcomponents Status II… basically no news! Laser (Roberval Walsh): • Not really trusted for calibration/monitoring purposes; however useful for readout debugging in some situations. • Currently switched off; some spares should have been replaced ages go. Money? Send to company? • Recently problems with LASER test triggers  excluded from test triggers. SRTDFLT (John Loizides): Situation unchanged; stable. TSS: CAL and Subcomponents

  19. Summary • CAL basically running stably with acceptable number of bad channels • Status of online and SlowControl systems is satisfactory • Calibration procedures are still getting more stable and automatized • Some severe problems in the past few months show vulnerability of the system. Sometimes external help necessary! • Computing (now maybe better under control) • Readout system • Manpower situation still satisfactory. • We would like 1-2 new CAL students. • Looking forward to welcome new DESY scientist in the CAL team. • One post-doc / designated student for HES would be appreciated. • Some subcomponents uncovered. How much effort can we / do we want to invest for PRES? FNC? LED? LASER? TSS: CAL and Subcomponents

More Related