1 / 14

Summer School Individual Project

Summer School Individual Project. Bio-Energy Summer School 2009 Taylor Norrell. Project Goal. Make an anaerobic digester that combines the gas storage unit and the digestion tank into one unit, using as little materials as possible. Anaerobic Digestion.

ziven
Télécharger la présentation

Summer School Individual Project

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Summer School Individual Project Bio-Energy Summer School 2009 Taylor Norrell

  2. Project Goal Make an anaerobic digester that combines the gas storage unit and the digestion tank into one unit, using as little materials as possible.

  3. Anaerobic Digestion Breakdown of complex organic materials into a methane/carbon dioxide “biogas” and a nutrient rich effluent Biomass Magazine, February 2009, http://www.biomassmagazine.com/article.jsp?article_id=2410&q=&page=all

  4. Benefits of Anaerobic Digestion • Biogas can be used for heating and cooking applications • Effluent can be applied to crops as fertilizer • Anaerobic conditions are effective treatment for pathogen elimination

  5. Digester Design Original Simplified

  6. Agitation • Essential for proper digestion • Helps prevent slurry layering • Well mixed digester is a healthy digester

  7. First Attempt • Agitates by moving the gas collector up and down • It was found that it was hard to move the collector up and down • It was also found to be very messy, contents from the digester would overflow when the gas collector was being pushed • Structure required a lot of pieces and was not very simple to make

  8. Second Attempt • Agitator consists of the top of the gas collector attached to 4 ropes which run through a series of pulleys. When the ropes are pulled, it lifts the top through the digester, stirring the contents. A brick was added so the top can sink to the bottom after being lifted. • Ropes became easily tangled • Without the right pulleys, it was difficult to pull the ropes.

  9. Final Attempt • Took two 2”x4” and screwed them together to make an ‘L’ shape. Screwed on the top of the gas collector to the bottom. • Agitates by the user lifting it up and down. • This was the simplest to make and the most effective mixer.

  10. Gas Collector • The inverted barrel acts as the gas collector • Methane is formed in the digester and rises up out of the slurry, and gets caught in the collector • On top of the collector, a PVC pipe with a ball valve acts as the gas outlet

  11. Cage • The cage is the wooden structure surrounding the digester, attaching four ropes to the gas collector • Helps stabilize the collector and promotes gas production by creating a lower pressure environment in the digester

  12. Oil • A layer of vegetable oil separates the slurry from the open air • This serves to keep conditions in the digester anaerobic • Acid forming bacteria are facultative anaerobes, methane forming bacteria are obligate anaerobes • Helps to manage odor and pests.

  13. Problems/Solutions • As gas collector rises, it brings some contents out with it, attracting pests • Possible solution: incorporate some sort rubber lining/brush to wipe off the collector as it rises • As scum forms, it rises above the oil layer and can attract pests • Regular agitation should maintain any scum problems, otherwise the oil layer can be skimmed to remove scum

  14. Thank You For Your Time! Questions?

More Related