1 / 28

2. PID Controller 1) Standard form of PID controller

2. PID Controller 1) Standard form of PID controller I action: Increase system type, reduce steady-state error. Additional pole at the origin  destabilizing D action: Additional zero  increase stability Increase damping (cf) general form.

zlata
Télécharger la présentation

2. PID Controller 1) Standard form of PID controller

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 2. PID Controller • 1) Standard form of PID controller • I action: Increase system type, reduce steady-state error. • Additional pole at the origin  destabilizing • D action: Additional zero  increase stability • Increase damping • (cf) general form

  2. 2) Time-response sensitivity to parameters • Assume depends on the parameter , i.e. • How to relate to ? • Def: Logarithmic sensitivity function • The change in the output with respect to percentage change in the parameter.

  3. 3) Tuning method of PID controllers • Eiegler-Nichols tuning rule • Stability margin tuner • (cf) There are many methods based on optimization techniques also • there are many AI techniques, pattern recognition techniques. • (i)Z-N tuner • Process reaction curve method • Ultimate gain method • Basically, auto-tuner consists of two stages i.e. identification stage and tuning stage

  4.  Process reaction curve method • Assumption on model : • Parameter achieve from unit step response. • Tuning to achieve decay ratio of 25%.

  5.  Ultimate gain method • Identification of oscillation point  gain tuning

  6. (ii) Stability margin tuner • Identification of one point in plane. •  Tuning based on margin. • 4) Integrator Antiwindup • Consider a PI control system.

  7. Typical response :

  8. How to tackle this problem? • Turn off the integral action as soon as the actuator saturates! • Antiwindup PI

  9. • See Ex. 4.12

  10. 3. Steady-state Tracking and System Type • vs. system type: • : position-error constant = • : velocity constant = • : acceleration constant = • (cf) Disturbance rejection vs system type •  same as vs. system type.

  11. (cf) Truxal’s Formula : • when is of type 1. • with • Let (ramp), then

  12. Using L’Hopital’s rule, • Assume T(s) = • Then

  13. 4. Stability •  BIBO stability • Stable iff every bounded input results in bounded output. • Condition for BIBO stability • pf): ) •  • 

  14. ) ( BIBO unstable if is unbounded.) • choose • then (note) • BI results in

  15.  Asymptotic stability • 입력이 없는 경우 어떤 초기 조건이건 관계없이 • 출력이  0 as t   • (Remark) LTI system 일 경우 • BIBO  asymptotic stability •  Re{pole}<0 • Then, the natural question is how to check the stability without • calculating the poles?

  16.  The Routh-Hurwitz Stability Criterion • Consider the characteristic equation of an n-order system : • Routh array :

  17. Case 1. Assume no element in the first column is zero. • The number of positive real roots of a(s) is equal to the number of sign change in first column. • Ex 1) . • Then Routh array is : •  There are two positive real roots.

  18. Ex 2) . • ⅰ) If stable • ⅱ) If there are two unstable roots.

  19. Ex 3). If the first column in R-H table is • Number of • Unstable roots : 2 1 4

  20. Case 2. If the first element in one of the rows is zero, including non-zero element in that row. • Ex 4) . • and •  there are two unstable roots.

  21. Ex 5) .  unstable K.

  22. Case 3. If an entire row of the Routh array is zero. • Ex 6) .

  23. Ex 7). Characteristic equation

  24. System이 stable한 조건은 • Ex 8)

  25. 실제로 • 1) • 2) •  “4개의 허수근”+안정근

  26. Ex 9)

  27. Now as •  “2개의 불안정근”+”2개의 허수근”+안정근 • 확인 :

  28.  Relative Stability • s-plane에서 특성방정식의 근들의 실수값이 적어도 보다 좌측에 존재하기를 원할 때, 즉 • Ex) • (HW) 4장 연습문제. 6, 11, 16, 18, 21, 26, 32, 39, 44, 49

More Related