1 / 19

Earthquakes as Seismic Sources

Earthquakes as Seismic Sources. Lupei Zhu. Topics. Earthquakes as seismic sources How do earthquakes happen? Rupture on faults; stress buildup Locating earthquakes Hypocenter, epicenter; how to locate? Earthquake magnitudes Richter’s local magnitude

zona
Télécharger la présentation

Earthquakes as Seismic Sources

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Earthquakes as Seismic Sources Lupei Zhu

  2. Topics • Earthquakes as seismic sources • How do earthquakes happen? • Rupture on faults; stress buildup • Locating earthquakes • Hypocenter, epicenter; how to locate? • Earthquake magnitudes • Richter’s local magnitude • Body wave magnitude and surface wave magnitude • Moment magnitude • How often do earthquake happen? • Gutenburg-Richter Law EASA-130 Seismology and Nuclear Explosions

  3. Seismic Sources • Any radiator of seismic waves • Earthquakes • Explosions • Landslides • Parameters to describe a seismic source • Location • Occurrence time • Source dimension • Time duration • Strength EASA-130 Seismology and Nuclear Explosions

  4. How Earthquakes happen • Earthquakes happen when rocks somewhere underground break along a surface called fault and the two sides pass each other in a sudden and violent motion. See Faults. • The cause of this sudden faulting is due to a gradual buildup of stress by the long-term plate-tectonics process inside the Earth. This explains why earthquakes are concentrated at plate boundaries. • Faults that were ruptured previously are weak zones and therefore are likely to be broken again in the future (Earthquake cycle). The time interval between earthquakes, however, is very irregular. • New faults can also be produced (so no one is 100% safe) EASA-130 Seismology and Nuclear Explosions

  5. Locating Earthquakes • The starting point of an earthquake rupture is called the earthquake hypocenter, which is given by the latitude and longitude of its projection on the surface (called epicenter) and depth. • Seismologists use arrival times of P and S waves at different seismic stations to locate an earthquake and determine its occurrence time. • At least three stations are needed to determine the epicenter and occurrence time (three unknowns). One more station is needed if the depth is included. • Earthquake depth trades off with its occurrence time and is more difficult to get accurately. • Modern Seismic Networks usually use hundreds of stations. EASA-130 Seismology and Nuclear Explosions

  6. Travel Time • Travel time, T, is defined as T = distance / velocity • Since P-waves travel faster than S-wave, the time separation between the two is larger at greater distances. EASA-130 Seismology and Nuclear Explosions

  7. A “Rule of Thumb” • Because of the structure of Earth, for distance ranges between about 50 and 500 km, we can use a formula to estimate the distance from the observed S-arrival time minus the P-arrival time: distance = 8  (S-P arrival time) EASA-130 Seismology and Nuclear Explosions

  8. Example • If the arrival time of an S wave is 09:30:15.0 (GMT) and the arrival time of a P wave is 09:29:45.0 (GMT), then the time difference is 30 s. Thus, the earthquake is located about 240 km away from the seismometer. • But in which direction ??? EASA-130 Seismology and Nuclear Explosions

  9. Distances and Circles • In this case, if you know the distance the earthquake is from the seismometer, you know the earthquake must be located on a circle centered on the seismometer, with a radius equal to the distance. EASA-130 Seismology and Nuclear Explosions

  10. Triangulation • With three or more stations, you can locate the earthquake using triangulation. EASA-130 Seismology and Nuclear Explosions

  11. Richter’s Local Magnitude • Another important parameter is the magnitude of an earthquake. It is a measure of the energy it released in the form of seismic wave. • Charles Richter in 1935 first developed a magnitude scale based on the peak amplitude A of the seismogram recorded by a particular type of seismometer  km away from the epicenter ML = Log A + 2.76 Log  - 2.48 • Richter’s scale is a logarithmic scale. Earthquakes of 1 magnitude difference produce 10 times amplitude difference. • Since the Richter Scale is defined for a old type of seismometer, it is rarely used today. But it is still widely and mistakenly quoted in news press. EASA-130 Seismology and Nuclear Explosions

  12. Other Magnitude Scales • The two most common modern magnitude scales are: • MS, Surface-wave magnitude (Rayleigh Wave) • mb, Body-wave magnitude (P-wave) EASA-130 Seismology and Nuclear Explosions

  13. Problem with Ms and mb • It was found that these two magnitudes saturate when earthquakes are large than certain levels (6 for mb and 7-8 for Ms). EASA-130 Seismology and Nuclear Explosions

  14. What Causes Saturation? • The rupture process. Large earthquakes rupture large areas and are relatively depleted in high frequency (short wavelength) seismic signals which the Ms and mb are measured with. EASA-130 Seismology and Nuclear Explosions

  15. The Best Magnitude • The best magnitude should be based on the actual ruptured area and the amount of slip. This is how theseismic momentM0 is defined:Mo = (rigidity)(rupture area)(slip)The rigidity is a measure of how strong the rock is. Rock rigidity is ~30 GPa. Water’s rigidity is zero.M0 has units of force*distance (Nm) • The moment magnitude Mw is defined asMW = 2/3 log M0 - 6.0to tie it to the surface magnitude. It will never saturate. EASA-130 Seismology and Nuclear Explosions

  16. Some Magnitude Examples • For an earthquakes like the 1991 Landers, California, Earthquake that ruptures a fault of 100 by 10 km2 with an offset of 3 m, the Mw is 7.3. • The hypothetical largest earthquake on Earth would to rupture the upper 100 km of the Earth around the globe, which corresponds to a magnitude of ~11-12. • An example of magnitude zero earthquake would be a 3 cm slip on a one square meter area. • So there are earthquakes of negative magnitudes (such as tearing a piece of paper, ~ -6). EASA-130 Seismology and Nuclear Explosions

  17. Seismic Energy and Magnitude • Seismic energy E is the energy released from the source in the form seismic waves. • It is only a small portion of the total energy released during the earthquake. A large portion (more than 90%) is spent on breaking rocks and producing permanent deformation in the source region. • It is directly related to magnitude log E (in joule) = 1.5 M + 4.8 • The seismic energy for a magnitude 6 earthquake is 1014 J (20 kt TNT, a Hiroshima type nuclear bomb), which is 101.5 = 32 times greater than from a magnitude 5 earthquake. EASA-130 Seismology and Nuclear Explosions

  18. Magnitude-Frequency Law • Gutenberg and Richter did statistics on number of earthquakes of different magnitudes in a given time. They found a universal law ( the Gutenberg-Richter Law) log N = a - M or N = N0 10-M • Globally, every year there are about two magnitude 8 earthquakes, 20 magnitude 7’s, 200 magnitude 6’s, … • The largest earthquake ever recorded is the 1960 Chile Earthquake of magnitude 9.8. According to the Gutenberg-Richter law, earthquake of this size happens every 50 years (we are almost there). • The parameter N0 varies from region to region, depending on local geology and stress environment. EASA-130 Seismology and Nuclear Explosions

  19. EASA-130 Seismology and Nuclear Explosions

More Related