Deep Laser Engraving_ How Does it Work_ (1)

1. Deep Laser Engraving: How Does it Work? Deep laser engraving is a process that uses a beam of light that is highly focused to engrave 3D forms into metals. A laser engraver, when working on deep engraving, would use pulsed fibre lasers as they reach the peak of power that is required to work on surfaces made of metal. If you’re looking for a laser wood engraver or want metal engraving, we recommend One to One Engravers to get the best laser engraver UK. They offer a myriad of surfaces, so you can get a lot under one roof. It is also important to mention that deep engraving and laser engraving are not entirely different. The latter is a process that takes longer, is deeper and will include finish requirements that are visually aesthetic and also pleasing to touch. A laser engraver can work on all kinds of metal and even on wood as is required by the customer, but the tools used would be vastly different as the peak power required for such work is not the same. Let’s talk about deep engraving stainless steel, a metal known for its toughness. This is a process that requires caution as the protective oxide layer that prevents rusting will have to be removed. The process may also result in the colour of the stainless steel changing. This can result from certain alloys, but mostly, it is based on the configuration of the laser parameters. This means that if the laser configuration is to engrave fast, then the steel may blacken. The process will take more time if you want a clean surface finish. Another thing to remember is that since the protective layer has been removed, an additional process like chrome plating, painting and such is required to prevent rust from building up on the metal later on. As mentioned, if you’re looking for an expert laser wood engraver or an engraver for any surface, we recommend One to One Engravers. You will only get an excellent laser engraver UK from here and will not be disappointed with the quality of work.