Engraving Tools for Calligraphers

1. Engraving Tools for Calligraphers If you’re a calligrapher or a beginner who wants to learn, here are a few engraving tools that you can use. Or, if you would like professional services, you can look up ‘engraving near me’ or even ‘engraving services near me’ on Google. There are many engraving tools that calligraphers use for different purposes. These are a few tools that you could use: - Nail Drill We recommend a Mystisa 2 Brushless motor drill that is portable, and you won’t even feel the vibrations as it is brushless even though it can go at 35,000 RPM. - Round Diamond Burs The round one is recommended when it comes to a curved surface and faux calligraphy. You can use 3mm for glass, 0.4 mm for compact mirror, and 2mm for metal. It is important to check the chank diameter when buying something like this. If you’re choosing something like the Mystisa 2 drill handpiece, it can fir a shank diameter of 3/32’’. If you want something that can fit ⅛’’ diameter, the Thumb portable drill is recommended. - Bur Lube A bur lube is needed for the bur to be lasting longer. You would need to drill the bur in the lube almost every ten to fifteen seconds when you are engraving, as this will make your work smoother too. Additionally, one tube that you buy can last you for quite some amount of time. - Makeup Brush Many people recommend using a small kabuki brush to dust off the particles while you’re engraving so you can see your handiwork. Generally, any brush will od for this as long as it’s not scratching the engraved surface that you’re working on. If you’re here after Googling, ‘engraving near me’ when it comes to calligraphy or even ‘engraving services near me’, then this is the right place for you. We recommend One to One Engraves, based in North Hampton UK, for the best professional engraving services. They also have a variety of services in one place, so you don’t have to look at multiple places to get what you need.