1 / 12

300-135 Real Exam Questions Answers - Cisco 300-135 Dumps PDF

If you want to improve your result with little effort then you should you expertly designed 300-135 Study Material. Our experts have worked hard for this helping material for the best performance of the students. Students work has become very easy now they can prepare from to-the-point questions and answers that will be covering all the syllabus contents. They donu2019t need to collect course related data from different places now because they are having all the required information to ace their exam at one place at DumpsFactory.

20617
Télécharger la présentation

300-135 Real Exam Questions Answers - Cisco 300-135 Dumps PDF

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Cisco 300-135 Troubleshooting and Maintaining Cisco IP Networks https://www.dumpsfactory.com/cisco/300-135-dumps.html

  2. Question: 1 A Cisco IOS router is disconnecting the console session of a user after some amount of time. Which action allows the user to work on the device without interruption? A. Use the speed 9600 command to match the baud rate B. Enter the no exec-banner command on line vty 0 4. C. Set the exec-timeout 0 0 command on line con 0. D. Increase the session timeout on line vty 0 15. Answer: C Question: 2 Refer to the exhibit. Which situation requires uRPF Loose Mode to be used in a production network that requires uRPF protection? A. The routers have dual-stack configurations with IPv4 and IPv6

  3. B. Normal network traffic experiences asymmetric routing C. Redistribution occurs between separate IGP domains. D. Multicast is deployed throughout the network via PIMv2 Answer: B Question: 3 Refer to the exhibit. Users on the 172.16.1.0/24 and 172.16.3.0/24 networks report that they frequently lose connectivity to the remote network. Which cause of the problem is true? A. recursive routing B. RIP auto summarization C. IP access list D. static IP routes Answer: A

  4. Question: 4 Refer to the exhibit. The tunnel fails to come up. Which two actions resolve the issue? (Choose two) A. On R2, change the tunnel source to 10.1.2.1 B. On R1, change the tunnel source to 10.1.1.1 C. On R1, change the tunnel destination to 10.1.3.2. D. On R2, change the tunnel destination to 10.1.3.1. E. OnR1, change the IP address to 10.1.1.1. F. On R2, change the IP address to 10.1.2.1 Answer: CE Question: 5 Refer to the exhibit.

  5. Interface Gi1/2 is the root port for VLAN 40 on DSW-01. Which configuration would establish interface Gi1/1 the new root port for VLAN40? A. DSW-01(config)#interface gig1/1 DSW-01(config-if)#spanning-tree port-priority 0 B. DSW-01(config)#interface gig1/2 DSW-01(config-if)#spanning-tree port-priority 0 C. DSW-01(config)#interface gig1/1 DSW-01(config-if)#spanning-tree cost 1 D. DSW-01(config)#interface gig1/2 DSW-01(config-if)#spanning-tree cost 5 Answer: D Question: 6 Refer to the exhibit.

  6. Dynamic trunk negotiation fails between S1 and S2 Which cause of the problem is true? A. There is a speed mismatch between S1 and S2. B. There are different VTP domains for S1 and S2 C. S1 has a FastEthernet interface D. The switchport mode is set to desirable Answer: B Question: 7 Which two commands can be used to show the number of packets dropped by Unicast RPF? (Choose two.) A. show ip interface B. show interface C. show ip traffic D. show ip cef E. show cef interface Answer: AE Question: 8 Refer to the exhibit.

  7. Which sequence number must be moved to the top of the ACL to enable access from R3 to R2? A. 20 B. 40 C. 50 D. 60 Answer: D Question: 9 Refer to the exhibit.

  8. The PC is unable to connect to the Internet. You have determined that the DHCP server has not issued a default gateway to the PC. Which configuration mechanism will resolve this issue? A. Configure DHCP snooping on the gateway router B. Configure static ARP on the gateway router C. Configure reverse ARP on the gateway router Answer: A Question: 10 Refer to the exhibit. R1 can ping the R3 fa0/1 interface Why do the extended pings fail? A. The maximum packet size accepted by the command is 1476 bytes. B. The DF bit has been set C. R3 is missing a return route to 10-99.69 0/30- D. R2 and R3 do not have an OSPF adjacency Answer: B Question: 11 Refer to the exhibit.

  9. An engineer has set up a GRE tunnel between Router A and Router C. Router A can reach the Router C Loopback1 interface but the tunneled traffic is not working. What is the cause of this issue?

  10. A. Router A does not have a route to 4.4.4.4 B. Router C has the wrong tunnel MTU C. Router B has a routing problem D. Router C does not have a route to 1.1.1.1 Answer: D Question: 12 Which two statements about troubleshooting with Unicast Reverse Path Forwarding are true? (Choose two) A. uRPF allows packets with source 0.0.0.0 and destination 255.255.255.255 to pass B. uRPF drops packets with source 0.0.0.0 and destination 255.255.255.255. C. uRPF configuration is supported on Layer 2 and Layer 3 Cisco devices. D. Cisco Express Forwarding must be disabled for uRPF to work E. Cisco Express Forwarding must be enabled for uRPF to work Answer: A, E Question: 13 Refer to the exhibit.

  11. Client A cannot reach client B while other users from other spoke routers can reach Client B. Which command provides the output necessary to troubleshoot the issue? A. show ip interface brief B. show ip route C. show ip bgp sum D. show dmvpn Answer: D Question: 14 Refer to the exhibit.

  12. Multiple users are logging into R3 via Telnet and making changes at the same time Which action will restrict the number of users logging into R3 simultaneously? A. Remove all configured usernames other than the admin account B. Apply the session-limit command to the VTY lines. C. Apply the access-class 175 in command on line con 0 D. Add the aaa authorization command to the global configuration. Answer: B Question: 15 Refer to the exhibit. Which statement about the INTERNET ACL is true? A. A packet with a source address of 2001;DB80:AD59:BA21:101:CAB:64;38 destined to port 80 will be permitted. B. HTTPS traffic from the 2001:DB8:AD59:BA21::/64 subnet will automatically be permitted along with HTTP traffic. C. The denied entries will be logged because of the explicit deny ipv6 any any log line D. A packet with a source address of 2001 :DB8 AD59ACC0 2020:882 :DB8:1125 will be denied Answer: B https://www.dumpsfactory.com/cisco/300-135-dumps.html

More Related