1 / 70

Willem Boone, KEMA Diagnostic Services, Chalfont, PA ICC Fall 2000 Educational Program on PD Cable Diagnostics November

Very Low Frequency Partial Discharge Detection; an Experienced Diagnostic tool for Distribution Cables. Willem Boone, KEMA Diagnostic Services, Chalfont, PA ICC Fall 2000 Educational Program on PD Cable Diagnostics November 1st 2000, St. Petersburg, Florida. Purpose of Diagnostic Testing

Audrey
Télécharger la présentation

Willem Boone, KEMA Diagnostic Services, Chalfont, PA ICC Fall 2000 Educational Program on PD Cable Diagnostics November

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Very Low Frequency PartialDischarge Detection; an Experienced Diagnostic tool for Distribution Cables Willem Boone, KEMA Diagnostic Services, Chalfont, PA ICC Fall 2000 Educational Program on PD Cable Diagnostics November 1st 2000, St. Petersburg, Florida

  2. Purpose of Diagnostic Testing • Principles of VLF testing Method • Test Results • Limitations and Innovative Developments • Cost/Benefit Evaluations • Future Developments • Conclusions

  3. MAINTENANCE OPTIONS • Reactive maintenance, “wait-and-see” • Active maintenance, “predictive maintenance”

  4. REACTIVE MAINTENANCE • To repair or replace if something is broken • Short term view (“no-health insurance”, “no-fire insurance”) • Short term benefit

  5. ACTIVE MAINTENANCE • To avoid service failures • To specify network quality • To target replacement money • To improve customer satisfaction • To avoid customer claims

  6. TO TRANSFER “MAINTENANCE” INTO “PREDICTIVE MAINTENANCE” IN ORDER TO REDUCE COSTS

  7. HOW TO TRANSFER MAINTENANCEINTO PREDICTIVE MAINTENANCE Maintenance + diagnostic testing = predictive maintenance

  8. PURPOSE OF DIAGNOSTIC TESTING • To avoid failures in service • To reduce costs • To target replacement money

  9. Principles of present VLF diagnostic testing of cables

  10. TRADITIONAL ONE-SIDED CABLE NETWORK DIAGNOSTICS defect 1 1 time

  11. CABLE 0.1 Hz HV- supply PRINTER SCOPE PC MEASUREMENT SETUP

  12. CHARACTERISTICS VLF PDD • Sine wave • Non-destructive • Off-lin

  13. SYSTEM PARAMETERS • Maximum voltage 41kV, RMS • 0,1 Hz, sine wave • Discharge-free • Maximum cable length to be tested 15,000 ft • All type of cable or accessory, however defect should generate P.D. • Non destructive test (maximum test voltage 2x phase-neutral voltage)

  14. KEMA VLF PD TESTING APPLICATIONS • PILC • All kinds of accessories • Both point to point and branched cable circuits • Very long cable lengths

  15. ADVANTAGES OF 0,1 Hz POWERSUPPLY OVER 60 Hz VOLTAGE • Longer lengths of cable to be tested • Compact voltage source

  16. TEST RESULTS • Test diagrams • Detected defects • Data base

  17. BURNED PAPER

  18. IMPLODED JOINT

  19. CRACKED HOUSING

  20. RECOMMENDATIONS • Replace/repair asap (<3 month) • Inspect asap • Retest (<2 year) • No action (retest < 5 year)

  21. VLF PD - DATABASE • A database application for storage and consulting measured data of MV-powercables • Data are used to diagnose cable system including splices and termination • Actual condition of cable and/or accessory can be predicted from the measured data stored

  22. Limitations of present VLF cable diagnostic testing • Only straight cable connections • Only cable lengths up to 14,000 ft

  23. Principle of multi-terminal cable circuit diagnostics: • Two-sided • Branched

  24. TWO-SIDED SYNCHRONISED CABLE NETWORK DIAGNOSTICS defect 2 1 1 2 time

  25. BRANCHED CABLE NETWORK SYNCHRONISED DIAGNOSTICS defect 2 1 1 3 2 3 time

  26. Trials in te USA to Test BCC-Diagnostics • September 1998 • April 1999

  27. Improvements After First Trial • Coupling to the Tested Cable • Master/Slave Unit • Digital Filter

  28. Improvements After the Second Trial • Software to Analyze Data • Remote Switching of Phases

  29. KEMA - Diagnostic Services Branched Cable Testing

  30. Introduction • General Test Procedure • Example Cable Map • Cable Tested Procedure • Results • Examples Taken From Actual Tests, In The USA, During The Past Year

  31. General Test Procedure • Besides the 0.1 Hz voltage source used for the PTP testing, additional equipment is required such as a measuring node at each of the branches to be monitored. A node consist of: • GPS (Global Position System) Interface • Master-Slave Computer System • Communication Interface • Figure 1 is a schematic of a three-branched test set-up with one master node (#1) and two slave nodes (#2 and 3).

  32. General Test Procedure

  33. Sample Cable Map Example #1 • 5 Ended Distribution Cable • 4 Ends Have Cable Access • All Underground • Required 2 tests

  34. Cable Tested Procedure Example #1

  35. Results Example #1

  36. Included In Test Report • Maps As Shown • Text Describing “Zones” • Summary Table

  37. Sample Cable Map #2 • Multiple Ended Distribution Cable • 4 Ends Have Cable Access • All Underground • Required 3 Tests

  38. Sample Cable Map/Test Procedure

  39. Results Example #2 • The network was virtually divided into three Sections for the reporting purposes. • Test results and Mapping diagrams are presented individually for each Section.

  40. Results Example #2 / Section #1

  41. Results Example #2 / Section #2

  42. Results Example #2 / Section #3

  43. Included In Test Report • Maps As Shown • Text Describing “Zones” • Summary Table

  44. Sample Cable Map #3 • Multiple Ended Distribution Cable • 2 Ends Had Cable Access • All Other Connections Required Utility To Cut Cable • All Underground • Required 4 Tests • Three Recording Nodes Were Used On Some Tests Sessions

  45. Sample Cable Map

  46. Cable Tested Example #3 / Test #1

  47. Cable Tested Example #3 / Test #2

More Related