1 / 11

Cisco 300-510 dumps exam questions latest update in September

Cisco 300-510 "Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)", the latest exam practice materials for September

Beavers2
Télécharger la présentation

Cisco 300-510 dumps exam questions latest update in September

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. https://www.leads4pass.com/300-510.html 2024 Latest leads4pass 300-510 PDF and VCE dumps Download 300-510Q&As Implementing Cisco Service Provider Advanced Routing Solutions (SPRI) Pass Cisco 300-510 Exam with 100% Guarantee Free Download Real Questions & Answers PDF and VCE file from: https://www.leads4pass.com/300-510.html 100% Passing Guarantee 100% Money Back Assurance Following Questions and Answers are all new published by Cisco Official Exam Center 300-510 VCE Dumps | 300-510 Study Guide | 300-510 Exam Questions 1 / 11

  2. https://www.leads4pass.com/300-510.html 2024 Latest leads4pass 300-510 PDF and VCE dumps Download QUESTION 1 What is the difference between a source tree and a shared tree in a multicast environment? A. To route traffic from source to receiver a source tree uses a link-state routing protocol and a shared tree uses a distance-vector routing protocol. B. A source tree has its root at the source, and a shared tree has its root at a designated rendezvous point. C. To stream multicast from source to receiver, a source tree uses PIM-SM and a shared tree uses PIM-DM. D. Source trees are the default type for bidirectional PIM, and PIM-DM uses shared trees by default. Correct Answer: B Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_pim/configuration/xe-16-5/imc-pim- xe-16-5-book/imc-tech-oview.html QUESTION 2 For which reason do you deploy BGP confederations within a BGP transit backbone? A. to support a larger number of eBGP peer sessions B. to increase the number of routes that can be redistributed between the running IGP and BGP C. to reduce the number of eBGP routes that must be shared between autonomous systems D. to reduce the number of iBGP peering sessions Correct Answer: D QUESTION 3 An engineer is troubleshooting a connectivity issue across the MPLS network and is verifying the forwarding behavior of packets. Which table does the engineer look at to verify the forwarding behavior of an IP packet as it enters the MPLS network at the ingress LSR? A. LFIB B. LIB C. RIB D. FIB Correct Answer: A https://community.cisco.com/t5/image/serverpage/image-id/44142iC3B9032F415B1395?v=v2 300-510 VCE Dumps | 300-510 Study Guide | 300-510 Exam Questions 2 / 11

  3. https://www.leads4pass.com/300-510.html 2024 Latest leads4pass 300-510 PDF and VCE dumps Download QUESTION 4 Refer to the exhibit. A network engineer is configuring router R3 to handle multicast streams, but Host-2 cannot send subscriptions messages to the IPTV source. Which configuration must the engineer apply to router R3 so it passes the IPTV stream to Host-2? A. R3# configure terminalR3(config)# no ip pim ssm defaultR3(config)# interface gigabitethernet 1/0/0R3(config-if)# ip pim sparse-modeR3(config-if)# ip igmp version 3R3(config-if)# ip pim ssm defaultR3(config)# interface gigabitethernet 1/0/1R3(config-if)# ip pim sparse-modeR3(config-if)# ip igmp version 3R3(config-if)# ip pim ssm default B. R3# configure terminalR3(config)# ip multicast-routingR3(config)# interface gigabitethernet 1/0/0R3(config-if)# ip pim sparse-modeR3(config-if)# ip igmp version 3R3(config)# interface gigabitethernet 1/0/1R3(config-if)# ip pim sparse- modeR3(config-if)# ip igmp version 3R3(config-if)# ip pim ssm default C. R3(config)# interface gigabitethernet 1/0/0R3(config-if)# ip pim sparse-modeR3(config-if)# ip igmp version 3R3(config)# interface gigabitethernet 1/0/1R3(config-if)# ip pim sparse-modeR3(config-if)# ip igmp version 3 D. R3(config)# interface gigabitethernet 1/0/0R3(config-if)# ip pim sparse-modeR3(config)# interface gigabitethernet 1/0/1R3(config-if)# ip pim sparse-modeR3(config-if)# ip igmp version 3 Correct Answer: D QUESTION 5 Refer to the exhibit. 300-510 VCE Dumps | 300-510 Study Guide | 300-510 Exam Questions 3 / 11

  4. https://www.leads4pass.com/300-510.html 2024 Latest leads4pass 300-510 PDF and VCE dumps Download There is a connectivity issue between Customer-1 and Customer-2. File servers between the customers cannot send critical data. R3 routes are missing from the routing table on the Customer-1 router. All interfaces on Customer-1 are up. Which configuration must be applied to router R2 to correct the problem? 300-510 VCE Dumps | 300-510 Study Guide | 300-510 Exam Questions 4 / 11

  5. https://www.leads4pass.com/300-510.html 2024 Latest leads4pass 300-510 PDF and VCE dumps Download A. Option A B. Option B C. Option C D. Option D Correct Answer: A QUESTION 6 Refer to the exhibit There is a BGP traffic path issue between Customer-1 and Customer-2 Users from Customer-2 have reported file transfer issues High utilization on the path between both customers causes many packet drops. 300-510 VCE Dumps | 300-510 Study Guide | 300-510 Exam Questions 5 / 11

  6. https://www.leads4pass.com/300-510.html 2024 Latest leads4pass 300-510 PDF and VCE dumps Download Which configuration resolves the issue? A. R4#router bgp 65504neighbor 10.0.23.3 remote-as 65501neighbor 10.0.23.3 filter-list 1 outip as-path access-list 1 deny ^65505$ip as-path access-list 1 permit .* B. R4#router bgp 65504address-family ipv4 unicastneighbor 10.0.23.3 remote-as 65501neighbor 10.0.23.3 activateneighbor 10.0.23.3 route-map PREPEND inexit-address-family exit route-map PREPEND permit 10 set as-path prepend 65506 65507 C. R1#neighbor 10.0.23.3 route-map LOCAL-PREF-150 outroute-map LOCAL-PREF-150set local-preference 150 D. R1#neighbor 10.0.24.4 route-map LOCAL-PREF-150 inroute-map LOCAL-PREF-150set local-preference 150ip prefix-list 5-5-5-S seq 5 permit 5.5.5.5/32route-map LOCAL-PREF-150 permit 10 match ip address prefix-list 5-S-5-5 set local-preference 150 300-510 VCE Dumps | 300-510 Study Guide | 300-510 Exam Questions 6 / 11

  7. https://www.leads4pass.com/300-510.html 2024 Latest leads4pass 300-510 PDF and VCE dumps Download Correct Answer: A QUESTION 7 Refer to the exhibit. Which two commands must the engineer configure for the company\\'s PIM-SM network to enable Auto-RP mappings to be sent over the FastEthernet0/0 interface, without affecting normal operation? (Choose two.) A. enable auto-rp listener B. enable sparse-mode C. enable Auto-RP announcements D. enable sparse-dense mode E. enable dense mode Correct Answer: AB QUESTION 8 After changing the IP address on an IOS XR router, an engineer cannot ping the new address Which step did the engineer forget to complete? A. commit the configuration B. roll back the configuration C. save the running configuration D. merge the configuration Correct Answer: A QUESTION 9 300-510 VCE Dumps | 300-510 Study Guide | 300-510 Exam Questions 7 / 11

  8. https://www.leads4pass.com/300-510.html 2024 Latest leads4pass 300-510 PDF and VCE dumps Download Refer to the exhibit. A network engineer applied configuration on R5 to summarize all OSPF routes, but R4 is still receiving specific routes from R5. The engineer has confirmed that both R5 and R4 routers are configured with correct summarization configuration, but R5 is not sending the summary routes. What action must the engineer take to fix the problem? A. Remove summarization configuration on R5 and configure it on R4 B. Clear link-state database on both R4 and R5 routers for summarization to work C. Configure a sham link between R4 and R5 to support summarization within Area 2 D. Move R4 and R5 in separate areas as now they maintain the same link-state database Correct Answer: D QUESTION 10 After an engineer configures BGP in R1, it starts receiving this message Jun 29 13:30:50.122: %BGP-5-ADJCHANGE: neighbor 192.168.10.1 Down User reset Jun 29 13:30:52.341: %BGP-3-NOTIFICATION: sent to neighbor 192.168.10.1 2/6 (unacceptable hold time) 0 bytes Which action makes the peering come back up again? A. Make a soft reset to the peer. B. Set up a minimum hold-down timer higher. C. Set up a hello timer higher. D. Set up a hold-down timer higher. Correct Answer: B 300-510 VCE Dumps | 300-510 Study Guide | 300-510 Exam Questions 8 / 11

  9. https://www.leads4pass.com/300-510.html 2024 Latest leads4pass 300-510 PDF and VCE dumps Download QUESTION 11 Refer to the exhibit. A network engineer is investigating a report of packet drops in an application running on a server connected to PE2. The engineer determined that: 1. The OSPF adjacency in area 0 is up, and it is learning the loopback addresses of all routers in area 0. 2. Traffic from users connected to PE1 to the application is also passing normally. 3. Packets from PE2 back to PE1 are being dropped. Which action resolves the issue? A. RR2(config)# router bgp 100RR2(config-router)# redistribute ospf 100 B. RR1(config)# router bgp 100RR1(config-router)# redistribute ospf 100 C. RR1(config)# router bgp 100RR1(config-router)# neighbor 10.10.30.1 send-label 300-510 VCE Dumps | 300-510 Study Guide | 300-510 Exam Questions 9 / 11

  10. https://www.leads4pass.com/300-510.html 2024 Latest leads4pass 300-510 PDF and VCE dumps Download D. RR2(config)# router bgp 100RR2(config-router)# no neighbor 10.10.20.1 send-label Correct Answer: C QUESTION 12 Refer to the exhibit. How are packets directed through the data plane when SRv6 is implemented? A. An ordered list of segments is encoded in a routing extension header B. The MPLS data plane is used to push labels onto IGP routes C. A stack of labels represents an ordered list of segments D. The packet is encapsulated with a header and trailer encoding the ordered list of segments Correct Answer: A Reference: https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/BRKIPM-2249.pdf QUESTION 13 Refer to the exhibit. 300-510 VCE Dumps | 300-510 Study Guide | 300-510 Exam Questions 10 / 11

  11. https://www.leads4pass.com/300-510.html 2024 Latest leads4pass 300-510 PDF and VCE dumps Download Which configuration ensures that RR2 does not send the same updates to PE2 that RR1 learns via PE1? A. RR1 and RR2 should have different router IDs. B. RR1 and RR2 should have different originator IDs. C. RR1 and RR2 should have the same router IDs. D. RR1 and RR2 should have the same cluster IDs. Correct Answer: D 300-510 VCE Dumps 300-510 Study Guide 300-510 Exam Questions 300-510 VCE Dumps | 300-510 Study Guide | 300-510 Exam Questions 11 / 11 Powered by TCPDF (www.tcpdf.org)

More Related