1 / 2

Safety switching device for protecting hazardous areas on machinery and plant

Switching Devices like EsGate and EsMatix monitor the connected contact mats and safety edges for actuation and interrupts.<br><br>They are also monitored for a change of the quiescent current. The clear LED and LCD displays show the status of the connected sensors at a glance.

Bircher1
Télécharger la présentation

Safety switching device for protecting hazardous areas on machinery and plant

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. EsMatix 3 Safety switching device for protecting hazardous areas on machinery and plant Fast, safe, compact Short response time EDM – external device monitoring www.bircher.com Program & diagnostic display

  2. Technical data EsMatix 3 Application Mechanical data Polyamide red-grey 22.5 × 92 × 85 mm (W × H × D) 150 g Plug terminals DIN rail Material Dimensions Situation Machine safety Situation Milling or grinding machine with automatic protective door Weight Connection type Solution Protection of hazardous areas near machinery when using contact mats combined with an EsMatix 3 safety switching device Mounting Solution Reliable protection from moving machinery parts with safety edges and EsMatix 3 safety switching device Electrical data 24 V DC –20% to +20% 24 V AC –20% to +10%, 50/60 Hz Max. 3 W For 1 or 2 sensors with 8.2 kΩ termination 24 V AC/DC, max. 3 mA@24 V Uth > 8 V DC Solid state relays, 24 V DC, min. 0,5 mA, max. 250 mA, RDS(on) ca. 2 Ω, internally protected by a 300 mA fuse Solid state relays, 24 V AC/DC, max. 250 mA, RDS (on) ca. 2 Ω < 5 ms < 30 ms (reset after actuation) < 300 ms > 100 ms Supply voltage Power consumption Tip Larger hazardous areas can be protected with several contact mats Benefit EsMatix 3 can monitor two tactile sensors at the same time (e.g. safety edge and contact mat) Inputs Reset input Safety outputs Status output Response time (actuation) Recovery time Start-up time External reset pulse (required) Displays Operation Safety shutdown Fault (interruption) LCD Green Orange Red Additional information Ordering information Programmable functions Automatic (automatic start) Manual (pushbutton) Manual (external) Between 0 and 1000 ms (5 levels) 0, 15, 30 or 45 ms Error signal output Reset (confirmation) Article no. Description 364283 EsMatix 3 Safety switching device Fall-delay time Input delay Relay status Ambient conditions IP20 Protection class of switching device –20°C to +60°C –40°C to +70°C Max. 95% relative, non-condensing Operating temperature Supplementary products Storage temperature Air humidity ClickLine Electric safety edge rubber profiles with click-fit foot Standards EN ISO 13849-1 (PLe, cat.3) Approvals CoverLine Electric safety edge rubber profiles for clicking in at the side Note Technical details and recommendations concerning our products are based on experience and are an aid for the orientation of the user. Details stated in our brochures and data sheets do not guarantee special properties of the products. This does not apply to special product properties confirmed by us in writing or individually. Subject to technical alterations. Contact mats Electric pushbutton for activating and deactivating machines and devices BBC Bircher Smart Access Wiesengasse 20 8222 Beringen Switzerland Phone +41 52 687 11 11 info@bircher.com www.bircher.com D53 007 EN 08/21

More Related