1 / 2

DIY Project To Design a Circuit to Control a Multi-directional Bot Through Switches

This is a DIY project to design a circuit to control a multi-directional bot through switches. Read more @ https://bit.ly/38xtXSC

BusinessUpside
Télécharger la présentation

DIY Project To Design a Circuit to Control a Multi-directional Bot Through Switches

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. DIY Project To Design a Circuit to Control a Multi-directional Bot Through Switches In this series, we will discuss on some DIY projects. This is a DIY project to design a circuit to control a Multi-directional bot through switches. Create your own bot following these steps. In our last video of this DIY project series, we showed you how to design your own bot using a MOSFET 2N7000 on a breadboard. Today we move forward to Step 2 – An interesting update! Let’sadddirection controls to the bot! This will allow the bot to move in all directions! Today is upgradation day, so let’s continue with the same frame. Let’s add directions to it. So, to get started, let’s gather a few components & tools. 1) A Breadboard 2) Jumper Wires 3) 1 Piece of ULN2803 4) 2 Pieces of Toggle Switches 5) DC Power Supply (5V-9V) 6) Robot Chassis with 2 BO Motors & 2 Wheels

  2. Circuit Diagram and Construction of Multi-directional Bot Overview of the components The ULN2803 IC is the heart of the circuit. It is a Darlington transistor array IC which is capable of switching high loads with low-intensity ON-OFF signals. A Darlington Transistor is an array of the transistor which can amplify a very small signal into a large signal output. For connecting all the modules, breadboard, jumper wires, and power supply are the key components required for the assembly. For Power Supply, you can purchase a 9V, Battery from your nearby store. Chassis includes the BO Motors fitted to the wheel. Notice that we have welded the jumper wires into the terminals of the motors. Make sure that the wires are correctly connected to the board. The battery will power the entire system. Watch the full video at: https://youtu.be/nKKDvE8J_8Y You can read the full content: https://www.businessupside.com/2020/12/24/diy-project-to-design-a-circuit-to-control-a-multi- directional-bot-through-switches/ •••••••••••••••••••••••••• Business Upside Email ID: support@businessupside.com Phone No.: +1-425-605-0775 Visit Us: https://www.businessupside.com/ Stay Connected Via: https://www.facebook.com/businessupside https://www.youtube.com/channel/UCuSkeS5oU-B2tRIBDYntmaw https://twitter.com/BusinessUpside1

More Related