1 / 6

Use Updated JN0-363 Dumps To Ensure a Great Score

Get the Top-notch JN0-363 exam questions to pass JN0-363 exam dumps. Ensure 100% success in JN0-363 pdf questions by Juniper JN0-363 training kit.<br>https://www.certsgrade.com/pdf/JN0-363/

David212
Télécharger la présentation

Use Updated JN0-363 Dumps To Ensure a Great Score

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. C E R T S GR A DE High Grade and Valuable Preparation Stuff High Grade and Valuable Preparation Stuff Juniper JN0-363 Juniper Service Provider Routing and Switching Specialist (JNCIS-SP) Questions And Answers PDF Format: For More Information – Visit link below: https://www.certsgrade.com/ Version = Version = Product Visit us athttps://www.certsgrade.com/pdf/jn0-363/

  2. Latest Version: 6.0 Question: 1 You must configure your dual-RE Junos device to allow failover to the backup RE without causing protocol or data plane disruption for neighboring devices. Which two configuration statements are required to accomplish this task? (Choose two.) Response: A.set chassis redundancy graceful-switchover B.set routing-options nonstop-routing C.set routing-engine redundancy D.set routing-options graceful-restart Answer: A,B Question: 2 Which statement describes the role of local preference in the BGP route selection process? Response: A.Local preference is evaluated early in the BGP route selection process and results in the route with the highest numerical local preference being selected. B.Local preference is evaluated early in the BGP route selection process and results in the route with the lowest numerical local preference being selected. C.Local preference is used to break ties when all other received BGP attributes are otherwise equal. D.Local preference is sent by an EBGP speaker to a neighboring AS in an attempt to influence how the remote peer's traffic will ingress into your network. Answer: A Question: 3 To prevent fragmentation issues across a GRE tunnel, which MTU value is recommended for the tunnel to accommodate most IP packets? Response: A.1476 B.1492 C.1500 Visit us athttps://www.certsgrade.com/pdf/jn0-363/

  3. D.1524 Answer: D Question: 4 Which three protocols can be encapsulated within a GRE tunnel on a Junos device? (Choose three.) Response: A.AppleTalk B.Aggregated Ethernet C.IPv6 D.MPLS E.Ethernet Answer: A,C,D Question: 5 You have configured multiple IP-IP tunnels across your network to provide connectivity to remote sites. Which technique is used to help the IP endpoints in your network determine the optimal packet size to send across your tunnels? Response: A.path MTU discovery B.fragmentation discovery C.end-to-end MTU discovery D.packet throughput discovery Answer: A Question: 6 Which protocol does wired Ethernet use to manage frame collisions? Response: A.IEEE 802.3 active monitoring B.IEEE 802.5 active monitoring C.carrier-sense multiple access with collision avoidance D.carrier-sense multiple access with collision detection Visit us athttps://www.certsgrade.com/pdf/jn0-363/

  4. Answer: D Question: 7 You observe that VPN routes are hidden on your PE router. Which situation accounts for these hidden routes? Response: A.The protocol next-hop is not found in inet.3 B.The protocol next-hop is not found in mpls.0 C.The protocol next-hop is not found in bgp.l3vpn.0. D.The protocol next-hop is not found in inet.2. Answer: A Question: 8 You have been asked to configure your Junos device for IPv6. Your addressing must be unique and the packets can travel only to the interface defined in your configuration. Which address type would be suited for these requirements? Response: A.unicast B.multicast C.anycast D.broadcast Answer: A Question: 9 Which two statements are correct regarding LDP-signaled Layer 2 circuits? (Choose two.) Response: A.You must enable the Layer 2 VPN signaling NLRI. B.You must configure the virtual circuit identifier. C.You must specify the neighbor using the tunnel end-point IP address. D.You must define a unique site-identifier value. Answer: B,C Visit us athttps://www.certsgrade.com/pdf/jn0-363/

  5. Question: 10 You have been asked to configure an IPv6 address for a group of interfaces that could belong on different routers. If a packet is sent to that address, it should be received by all routers in the group. Which address type would be suited for these requirements? Response: A.Unicast B.Multicast C.Anycast D.Broadcast Answer: B Visit us athttps://www.certsgrade.com/pdf/jn0-363/

  6. For More Information – Visit link below: http://www.certsgrade.com/ PRODUCT FEATURES 100% Money Back Guarantee 90 Days Free updates Special Discounts on Bulk Orders Guaranteed Success 50,000 Satisfied Customers 100% Secure Shopping Privacy Policy Refund Policy Discount Coupon Code: CERTSGRADE10 Visit us athttps://www.certsgrade.com/pdf/jn0-363/ Powered by TCPDF (www.tcpdf.org)

More Related